Publications

Grolleau V, Colon X, Galpin B, Roth C, Mohr D. Design of a high strain rate in-plane torsion experiment. International Journal of Impact Engineering. 2026;216:105782.
Beerli T, Roth C, Li X, Grolleau V, Mohr D. Rate-dependent plasticity and fracture of five DP-steels: static and dynamic high-throughput experiments and neural network modeling. International Journal of Impact Engineering. 2026;215:105761.
Challamel N, Aftabi-Sani A. Static and vibrations of mixed local/peridynamic circular membrane with Bessel kernel: Exact and numerical approaches. International Journal of Engineering Science. 2026;226:104559.
Perrot A, Guiheneuf S, Keita E. Portable tools for the determination of the fresh state strength of earthen materials. Construction and Building Materials. 2026;536:146984.
Roth C, Legrelle F, Tancogne-Dejean T, Grolleau V, Mohr D. Replacing strain gages by line camera DIC in Hopkinson bar experiments. International Journal of Impact Engineering. 2026;212:105620.
Jacquet Y, Picandet V, Perrot A. Underwater 3D printing of concrete: Mapping mix-design drivers of hardened performances. Construction and Building Materials. 2026;528:146539.
Vaccaro M, Challamel N, Barretta R. Nonlocal Beam-Foundation Problems with Discontinuities. Journal of Engineering Mechanics - ASCE. 2026;152(6)
Zieger V, Lecompte T, Guihéneuf S, Guevel Y, Bazzana M. Dynamic climate change assessment applied to structural building materials. 2025;3140(13):132023.
James J, Thomas M, Joseph T, Maria H, Vignaud G, Grohens Y et al. Engineered Polystyrene‐Zirconium Dioxide Nanocomposite With Enhanced Optical Properties. Journal of Polymer Science. 2024;63(24):5426-5436.
Ratanpara A, Donjuan J, Smith C, Procak M, Aboubakar I, Mandin P et al. Hybrid Huff-n-Puff Process for Enhanced Oil Recovery: Integration of Surfactant Flooding with CO2 Oil Swelling. Applied Sciences. 2024;14(24):12078.
Challamel N, Atashipour S, Girhammar U, Barroso V, Andrade A, Boutin C et al. A historical overview on static and dynamic analyses of sandwich or partially composite beams and plates. Mathematics and Mechanics of Solids. 2024..
Zimmermann de Almeida O, Carrere N, Le Saux M, Le Saux V, Moreau G, Pannier Y et al. Compression-compression fatigue of quasi-isotropic laminates: Failure mechanisms and link between dissipative behavior and fatigue life. International Journal of Fatigue. 2024;193:108780.
Thappily P, Molina S, Sainflou D, Beyet P, Donval-Petres N, Al Shakarchi F et al. Diagnostics for NMC Li-ion batteries, focusing on SOH, assessment through empirical and Multiphysics modelling. 2024..
Challamel N, Wang C, Reddy J, Faghidian S. Equivalence between micromorphic, nonlocal gradient, and two-phase nonlocal beam theories. Acta Mechanica. 2024..
Rabillard L, Thappily P, Matheswaran P, Le Haret Y, Gahagnon L, Giraud O et al. Measurement of the performance of an industrial scale alkaline electrolyzer prototype. 2024..
Lammouchi Z, Labiod C, Srairi K, Benbouzid M, Khechekhouche A, Albalawi F et al. Experimental validation of model-free predictive control based on the active vector execution time for grid-connected system. Scientific Reports. 2024;14(1):30326.
Hochhausen M, Sacher M, Augier B, Nicolas H, Bot P, Hauville F et al. How does sailor morphology affect Olympic windfoil performance? 2024..
Bourmaud A, Rudolph A, Habrant A, Müssig J, Paës G, Graupner N. Innovative use of fluorescent grafting for damage and morphological monitoring during the extrusion process of PCL-flax fibre-reinforced composites. Industrial Crops and Products. 2024;222(1):119446.
Daly M, Chihi M, Bouraoui C, Tarfaoui M. Advancing composite materials: Exploring thermomechanical properties of Aerosil/polycarbonate composites via additive manufacturing. Journal of Manufacturing Processes. 2024;131(11-12):1770-1783.
Yvin M, Kedzierski M, Le Lan M, Estorgues V, Astié L, Faivre-Primot C et al. BIOMALEG - Dégradation et fin de vie des paillages plastiques dans les sols agricoles. 2024..
Dris R, Beaurepaire M, Bessaire C, Blanchouin A, Calabro-Souza G, Dourneau L et al. Transfert des microplastiques dans un bassin agricole (Orgeval). 2024..
Sévédé T, Demmouche Y, Arbab Chirani S, Doudard C, Calloch S. Determination of the heat source field associated to self‐heating phenomenon under cyclic loading at 20 kHz. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2024;104(12):e202400702.
Kedzierski M, Yvin M, Le Lan M, Estorgues V, Astié L, Faivre-Primot C et al. BIOMALEG - Dégradation et fin de vie des paillages plastiques dans les sols agricoles. 2024..
Qarssis Y, Karine A, Sayed S, Daly M, Nachtane M, Tarfaoui M. A model-based deep learning framework for damage classification and detection in polycarbonate infused with AEROSIL under dynamic loading conditions. Composites Part B: Engineering. 2024;287:111810.
Li J, Hamila N, Guzman-Maldonado E, L'Hostis G, Wang P. Numerical modeling and simulation prediction of the forming process of 3D-tubular braided composite reinforcements. Thin-Walled Structures. 2024;205:112426.
Chamley A, Baley C, Gayet N, Sarrazin J, Fuchs S, Freyermouth F et al. (Bio)degradation of biopolymer and biocomposite in deep-sea environments. Marine Pollution Bulletin. 2024;209:117230.
Rosi G, Auffray N, Combescure C. Elastic wave propagation in cubic non-centrosymmetric and chiral architectured materials: Insights from strain gradient elasticity. International Journal of Solids and Structures. 2024;305:113059.
Kedzierski M, Cirederf Boulant D, Bruzaud S, Mortas N, Rabat C, Thévenin N et al. PRO : contamination des produits résiduaires organiques en microplastique. 2024..
Tarfaoui M, Gueraiche L, Osmani H, Daly M, Mesbah K. Exploring the dynamic compression behavior of glass/epoxy composite through cutting-edge numerical modeling techniques. Materials Today Communications. 2024;41:110427.
Ngouobe J, Lecompte T, Ngohe-Ekam P, Nfornkah B, Bailleul J, Kervoelen A et al. Comparative study of the physical and mechanical properties of Bambusa vulgaris fibers from Cameroon for application to hybrid composite materials. Industrial Crops and Products. 2024;222:119725.
Hariprasath K, Priyadharshini M, Balaji P, Kumar R, Thangappan R, Pazhanivel T. Electrode engineering strategies for boosting the performance of Ni Co Al − LDH in supercapacitor application. Chemical Physics Letters. 2024;856:141584.
Chamley A, Baley C, Matabos M, Vannier P, Sarradin P, Freyermouth F et al. Polymer material biodegradation in the deep sea. A review. Science of the Total Environment. 2024;957:177637.
Djemai N, Arif A, Guettaf A, Benbouzid M, Berghout T. Integrating Physics-Based and Deep Learning for Energy Management Optimization Under Measurement Uncertainty: the Case of Fuel Cell Hybrid Electric Vehicles. International Journal on Energy Conversion (IRECON). 2024;12(6):238.
Chen H, Niu J, Cai Y, Aït-Ahmed N, Aït-Ahmed M, Benbouzid M. Adaptive sliding mode-based feedback linearization control for floating offshore wind turbine in region II. International Journal of Green Energy. 2024;22(2):467-486.
Chen H, Niu J, Cai Y, Aït-Ahmed N, Aït-Ahmed M, Benbouzid M. Adaptive sliding mode-based feedback linearization control for floating offshore wind turbine in region II. International Journal of Green Energy. 2024;22(2):467-486.
Morin V, Nême A, Sacher M, Leroux J, Jochum C, Lacroix E. Non-linear fluid-structure interaction of a semi-rigid jib with forestay modeling. 2024..
Issa H, Natale G, Ausias G, Férec J. Suspension of active rod-like particles in complex flows. 2024..
Join C, Delaleau E, Fliess M. Flatness-based control revisited: The HEOL setting. Comptes Rendus. Mathématique. 2024;362:1693-1706.
https://comptes-rendus.academie-sciences.fr/mathematique
Hattabi I, Kheldoun A, Bradai R, Khettab S, Sabo A, Belkhier Y et al. Enhanced power system stabilizer tuning using marine predator algorithm with comparative analysis and real time validation. Scientific Reports. 2024;14(1):28971.
Bangoura M, Azemar F, Linossier I, Vallée K, Balnois E, Vignaud G. Impact de la masse molaire du PDMS sur les performances antifouling des peintures siliconées. 2024..
Pehlivan Solak H, Wackers J, Pellegrini R, Serani A, Diez M, Perali P et al. Optimising hydrofoils using automated multi-fidelity surrogate models. Ships and Offshore Structures. 2024;1-12.
Qarssis Y, Nachtane M, Karine A, Abichou M, Faik A, Tarfaoui M. Machine learning-based analytical approach for mechanical analysis of composite hydrogen storage tanks under internal pressure. International Journal of Hydrogen Energy. 2024;89:1440-1453.
Bouslimani M, Tayeb F, Amirat Y, Benbouzid M. Replay Attacks on Smart Grids: A Comprehensive Review on Countermeasures. 2024;1-6.
Bulacu R, Dhondt M, Demmouche Y, Bădulescu C, Nițu E, Iordache D. A Review on Friction Stir Welding of Copper: Tool Geometry, Process Parameters, and Joint Properties. Materials. 2024;17(21):5374.
Rashid H, Benbouzid M, Amirat Y, Mamoune A, Titah-Benbouzid H. Fast R-CNN-based Detection and Coverage Estimation of Biofouling on Tidal Stream Turbines. 2024;1-6.
Bouchnak R, El Ayari T, Rabeh I, Salhi O, Aloui F, Maamouri A et al. Polyethylene microplastic modulates the toxicity of pentachlorophenol to the microalgae Isochrysis galbana, clone t-ISO. Chemosphere. 2024;367:143588.
Degorre L, Fossen T, Chocron O, Delaleau E. A model-based kinematic guidance method for control of underactuated autonomous underwater vehicles. Control Engineering Practice. 2024;152:106068.
Challamel N, El-Borgi S, Trabelssi M, Reddy J. Free vibration response of micromorphic Timoshenko beams. Journal of Sound and Vibration. 2024;591:118602.
Saos-Kauten A, Chevalier A, Hoëz A, Maalouf A, Ville J, Mattei J et al. Self-Induced Magnetic Anisotropy in 3-D Printed Ferromagnetic Composites. IEEE Transactions on Magnetics. 2024;60(11):1-6.
Nachtane M, El Fallaki Idrissi M, Tarfaoui M, Qarssis Y, Abichou A, Faik A. Deep learning-driven predictive tools for damage prediction and optimization in composite hydrogen storage tanks. Composites Communications. 2024;51:102079.
Jamet H, Helbert G, Bouillon F, Hamila N. Procedure for generating entangled fiber networks for numerical finite element simulation: Application to the case of needle-punching. Finite Elements in Analysis and Design. 2024;240:104210.
Pawar A, Ausias G, Corre Y, Grohens Y, Férec J. Porosity gradient control of 3D-printed hybrid foam structures. Progress in Additive Manufacturing. 2024..
Rahmouni D, Mouss M, Benbouzid M, Mouss L. Diagnosis of External Faults in Photovoltaic Systems based on a Deep Learning approach. Revue des Energies Renouvelables. 2024;47-57.
Chetan B, Courtois M, Cadiou S, Carin M, Nain V, Machi F. Numerical and experimental study of melt instabilities durin spot laser welding of aluminium. 2024..
Brateau M, Kerampran S, Bouchama A, Clough A, Arrigoni M. Influence of the equation of state for moderate to high pressure gaseous systems. Physics of Fluids. 2024;36(10)
Matheswaran P, Rabillard L, Cadin T, Gury B, Perrin L, Al Shakarchi F et al. Brines Electrolysis: Binder Free Electrocatalysts for chlor alkali Electrolyzer. 2024..
Houssein J, Goïc G, Courtois M, Pierre T, Carin M. A tracer-free photographic method for the estimation of the velocity field in a liquid metal pool. Measurement Science and Technology. 2024;36(1):015404.
Yahia A, Perrot A. Measuring Procedures. 2024;39:73-95.
Perrot A, Amziane S. Concrete Rheometers. 2024;39:33-71.
Rashid H, Habbouche H, Amirat Y, Mamoune A, Titah-Benbouzid H, Benbouzid M. B-FLOWS: Biofouling Focused Learning and Observation for Wide-Area Surveillance in Tidal Stream Turbines. Journal of Marine Science and Engineering. 2024;12(10):1828.
Le Clinche S, Lannuzel F, Ropert K, Seantier B. Objectiver les freins à la pratique nautique pour les PSH. 2024..
Lepitre P, Merlet L, Doudard C, Dhondt M, Surand M, Calloch S. Influence of shot-peening on the self-heating behavior and fatigue properties of 300M steel. Mechanics of Materials. 2024;199:105174.
Marie S, Alves J, Queval J, Mocellin K, Bay F. Simulation of electrically assisted welding processes. 2024..
Morgillo L, Durand S, Brionne L, Mourret N, d'Arras P, Abida M et al. A multicriteria approach to quantify contaminant shives in industrial batches of flax fibres. Industrial Crops and Products. 2024;218:119038.
Kuwabara T, Barlat F. Deformation Behavior of Aluminum Alloys under Various Stress States: Material Modeling and Testing. Materials Transactions. 2024;65(10):1193-1217.
Jeannin T, Arnold G, Bourmaud A, Corn S, de Luycker E, Dumont P et al. A round-robin study on the tensile characterization of single fibres: A multifactorial analysis and recommendations for more reliable results. Composites Part A: Applied Science and Manufacturing. 2024;185(185):108323.
Deportes I, Mortas N, Thévenin N, Ehrhardt F, Ruidavets L, Rabat C et al. MICROPLASTIQUES PRÉSENTS DANS LES PRODUITS RÉSIDUAIRES ORGANIQUES. 2024;81.
Germain L, Jegou S, Barrallier L. Stress–diffusion coupling. Application to interstitial diffusion. International Journal of Mechanical Sciences. 2024;279:109574.
Adeli K, Nachtane M, Tarfaoui M, Faik A, Pollet B, Saifaoui D. Deep learning analysis of green ammonia synthesis: Evaluating techno-economic feasibility for sustainable production. International Journal of Hydrogen Energy. 2024;87:1224-1232.
Rajakumaran V, Melelli A, Quiles A, Weitkamp T, Perrin J, Proudhon H et al. Experimental and numerical approach to understand the role of defects in damage mechanisms of flax fibers at bundle scale. Industrial Crops and Products. 2024;218:119025.
Munzone A, Pujol M, Badjoudj M, Haon M, Grisel S, Magueresse A et al. Design of Plastic Binding Lytic Polysaccharide Monooxygenases via Modular Engineering. Chem & Bio Engineering. 2024;1(10):864-875.
Touhami Y, Boudhiaf R, Kabeel A, Khelifa A, Attia M, Abdel-Aziz M et al. Effect of absorber shape on energy, exergy efficiency and enviro‐economic analysis of solar air collector: An experimental study. Environmental Progress & Sustainable Energy. 2024;43(6)
Rashid H, Benbouzid M, Amirat Y, Berghout T, Titah-Benbouzid H, Mamoune A. Biofouling detection and classification in Tidal Stream Turbines through soft voting ensemble transfer learning of video images. Engineering Applications of Artificial Intelligence. 2024;138:109316.
Lammouchi Z, Labiod C, Srairi K, Benbouzid M. ENHANCED MODEL-FREE PREDICTIVE CONTROL FOR VOLTAGE SOURCE INVERTERS USING AN ADAPTIVE OBSERVER. Revue Roumaine des Sciences Techniques. Serie Électrotechnique et Énergétique. 2024;69(3):321-326.
Hébert D, Le Bras C, Reynier B, Aubert B, Chevalier J, Lescoute E et al. Momentum Transfer During Laser-Driven Cratering Experiments. 2024..
Li J, Chen H, Cai Y, Gao N, Aït-Ahmed N, Benbouzid M. Improved NSGA-II algorithm for constrained thrust allocation of dynamic positioning ships in rough sea conditions. Journal of Marine Engineering and Technology. 2024;24(1):1-11.
Ghafoor A, Aldahmashi J, Apsley J, Djurović S, Ma X, Benbouzid M. Intelligent Integration of Renewable Energy Resources Review: Generation and Grid Level Opportunities and Challenges. Energies. 2024;17(17):4399.
Wang G, Chen H, Yu F, Yan W, Wang X, Benbouzid M et al. Design, Analysis, and Comparison of a Novel Axial Flux Modular-Double-Stator Hybrid Excitation SRM. IEEE Transactions on Transportation Electrification. 2024;10(3):6100-6114.
Corbel P, Jumel J. Characterization of the interface fracture energy dependency on mixed mode fracture between rigid fiber and soft matrix. Journal of the Mechanics and Physics of Solids. 2024;190:105745.
Huo W, Liu B, Xu W, Xie B, Fan L, Benbouzid M et al. High precision and efficient simulation of large-size proton exchange membrane fuel cells incorporated with a novel alternative cooling method. International Journal of Heat and Mass Transfer. 2024;230:125780.
Gong Z, Wang B, Benbouzid M, Li B, Xu Y, Yang K et al. Cross-domain diagnosis for polymer electrolyte membrane fuel cell based on digital twins and transfer learning network✰. Energy and AI. 2024;17:100412.
Quereilhac D, de Luycker E, Guessasma S, Abida M, Perrin J, Weitkamp T et al. Synchrotron X-ray microtomography and finite element modelling to uncover flax fibre defect’s role in tensile performances. Composites Part A: Applied Science and Manufacturing. 2024;184:108276.
Kedzierski M, Boulant-Cirederf D, Palazot M, Yvin M, Soccalingame L, Bruzaud S et al. Microplastics in French soil: from sources to consequences. 2024..
Perruisseau-Carrier A, Marco Y, Fleury V, Brogan D, Forli A, Bahlouli N. Biomechanical characterization of cadaveric brachial plexus microstructure. Hand Surgery and Rehabilitation. 2024;43(4):101745.
Perruisseau-Carrier A, Marco Y, Fleury V, Jmal H, Brogan D, Forli A et al. Biomechanical characterization of cadaveric brachial plexus regions using uniaxial tensile tests. Hand Surgery and Rehabilitation. 2024;43(4):101747.
Thacher E, van Ruymbeke B, Gabillet C, Jacques N, Mäkiharju S. Flow topology changes with bubbly flow around a circular cylinder. International Journal of Multiphase Flow. 2024;179
Naceur F, Toumi S, Ben Salah C, Mahjoub M, Tlija M. Decision-making solutions based artificial intelligence and hybrid software for optimal sizing and energy management in a smart grid system. Concurrent Engineering: Research and Applications. 2024;32:3-19.
Ricca F, Galindo-Rosales F, Akhavan-Safar A, da Silva L, Fkyerat T, Yokozeki K et al. Predicting the Adhesive Layer Thickness in Hybrid Joints Involving Pre-Tensioned Bolts. Polymers. 2024;16(16):2284.
Suganesh R, Venkatesh G, Prabu K, Ranjith R, Periyasami G, Bheema R. Synergistic effect of CoWO4 and g-C3N4 nanohybrid as reliable electrode for high performance supercapacitor. Journal of Materials Science: Materials in Electronics. 2024;35(22):1552.
Becker J, Le Saux M, Charrier P, Hervouet W, Le Saux V, Maheo L et al. The SFIR Test: An Innovative Hydrostatic Compression Test to Characterize the Volumetric Behavior of Polymeric Foams. Experimental Mechanics. 2024;64(9):1407-1422.
Perali P, Sacher M, Leroux J, Wackers J, Augier B, Hauville F et al. Performance prediction of a hydrofoil near the free surface using low (BEM) and high (RANS) fidelity methods. Applied Ocean Research. 2024;151:104157.
Habbouche H, Benkedjouh T, Amirat Y, Benbouzid M. Rotating machine bearing health prognosis using a data driven approach based on KS‐density and BiLSTM. IET Science Measurement and Technology. 2024..
Ghazvini M, Hafez M, Pena C, Mandin P, Inguanta R, Kim M. Dual-tracer laser-induced fluorescence thermometry for understanding bubble growth during nucleate boiling on oriented surfaces. International Journal of Heat and Mass Transfer. 2024;227:125517.
Landebrit L, Sanchez R, Soccalingame L, Palazot M, Kedzierski M, Bruzeau S et al. Small microplastics have much higher mass concentrations than large microplastics at the surface of nine major European rivers. Environmental Science and Pollution Research. 2024..
Tancogne-Dejean T, Roth C, Grolleau V, Beerli T, Mohr D. Using miniature experiments to reveal strength gradients in battery casings. International Journal of Mechanical Sciences. 2024;275:109253.
Papoutsellis C, Scolan Y, Hascoët R. Capsize criteria in beam seas: Melnikov analysis vs. safe basin erosion. Ocean Engineering. 2024;306:118024.
Du X, Meng J, Amirat Y, Gao F, Benbouzid M. Exploring impedance spectrum for lithium-ion batteries diagnosis and prognosis: A comprehensive review. Journal of Energy Chemistry. 2024;95:464-483.
Do V, Le Grognec P, Rohart P. A new analytical tool for the elastic/plastic buckling design of pressure vessels subjected to external pressure. International Journal of Pressure Vessels and Piping. 2024;210:105221.
Melelli A, Goudenhooft C, Durand S, Quiles A, Cortopassi R, Morgillo L et al. Revealing degradation mechanisms of archaeological flax textiles through the evolution of fibres’ parietal polymers by synchrotron deep-UV fluorescence. Polymer Degradation and Stability. 2024;226:110826.
Daly M, Tarfaoui M, Chihi M, Bouraoui C. Dynamic analysis of 3D-printed CF-PETG composites with different infill densities. Progress in Additive Manufacturing. 2024..
Challamel N, Nguyen H, Wang C, Ruta G. In-Plane Vibrations of Elastic Lattice Plates and Their Continuous Approximations. Mathematics. 2024;12(15):2312.
Ngouobe J, Lecompte T, Ngohe-Ekam P, Penlap L, Tiombou M, Nfornkah B et al. Evaluation of the potential of Yushina alpina bamboo fibers from Cameroon for the manufacture of biocomposites. Heliyon. 2024;10(13):e32668.
Houssein J, Joly F, Courtois M, Pierre T, Quemener O, Carin M. Apport des modèles réduits pour l’identification expérimentale de la diffusivité thermique des métaux liquides. Entropie : thermodynamique – énergie – environnement – économie. 2024;5
Royne S, Laurent H, Maillard A. Optimum heating time for warm forming of AA7075 aluminum alloy in T6 condition. International Journal of Advanced Manufacturing Technology. 2024;133:6005–6021.
Fruleux T, Sauleau P, Caudal F, Champion M, Chauvin L, Castro M et al. Marine biofilm formation on flax fibre reinforced biocomposites. Biofouling. 2024;40(7):415-430.
Feulvarch E, Rassineux A, Roux J, Sova A, Pouvreau C, Josse F. A membrane finite element for fast simulation of overlapping beads geometry during direct energy deposition additive manufacturing. Computational Mechanics. 2024..
Audren M, Guihéneuf S, Le Borgne T, Rangeard D, Perrot A. Assessing the Recyclability of Raw Stabilised Compressed Earth Blocks. 2024;52:226-235.
Guihéneuf S, Audren M, Lely N, Le Borgne T, Rangeard D, Perrot A. Monitoring and Modeling of Formwork Pressure Exerted by Castable Earthen Materials. 2024;52:81-90.
Colinart T, Mcgregor F, Duc M, Issaadi N, Le Guen L, Ferroukhi Y et al. Preliminary Results of Interlaboratory Tests on Hygrothermal Properties of CEB. 2024;52:458-465.
Thappily P, Molina S, Sainflou D, Beyet P, Donval-Petres N, Al Shakarchi F et al. Organizing cycling and diagnostic for NMC Li-Ions Batteries SOH empirical and Multiphysics modelling. 2024..
Pranesh M, Rabillard L, Cadin T, Gury B, Perrin L, Al Shakarchi F et al. Seawater and Osmosis Brines Electrolysis: Electrodeposited Surface Tailoring of 316L Stainless Steel for Electrolyzer. 2024..
Zimmermann de Almeida O, Carrère N, Le Saux M, Castagnet S, Moreau G, Marco Y. Interlaminar shear fatigue of carbon/epoxy laminates. 2024;1744-1749.
Jeannin T, Arnold G, Bourmaud A, Corn S, de Luycker E, Dumont P et al. Tensile Characterization of Single Plant Fibres : a Benchmark Study. 2024..
Zhu H, Liu S, Xu W, Dai J, Benbouzid M. Linearithmic and unbiased implementation of DeLong’s algorithm for comparing the areas under correlated ROC curves. Expert Systems with Applications. 2024;246:123194.
Qiu Y, Li Q, Ai Y, Wang T, Chen W, Bai H et al. Optimal scheduling for microgrids considering long-term and short-term energy storage. Journal of Energy Storage. 2024;93:112137.
Yvin M, Le Lan M, Kedzierski M, Estorgues V, Mondy S, Faivre-Primot C et al. BIOMALEG – (Bio)dégradabilité dans les sols des matériaux de la filière légumière. 2024;63.
Sallami A, Malecot P, Richard F, Fontaine M, Lejeune A, David S et al. Static and dynamic behaviours of a self-expanding nitinol stent real contact area within a PTFE catheter: A multiscale approach. Tribology International. 2024;199:110014.
Salhi O, Lasserre B, Magueresse A, Douzenel P, Mhadhbi L, Trabelsi M et al. Risques environnementaux du cadmium en interaction avec un plastique biodégradable sur Phaeodactylum tricornutum. 2024..
El Assaad M, Colinart T, Lecompte T. Impact of Rendering on Drying Stage of Light Earth Walls. 2024;52:438-447.
Beckett C, Bras A, Fabbri A, Keita E, Perlot C, Perrot A. Preface. 2024;52:v-vi.
Faria P, Beckett C, Fabbri A, Keita E, Morel J, Perlot C et al. RILEM Contribution to Earthen Building. 2024;52:194-205.
https://link-springer-com.extranet.enpc.fr/chapter/10.1007/978-3-031-62690-6_20
Le Bihan A, Marco Y, Le Saux V, Chazeau L, Chenal J, Warneboldt I et al. About mechanically induced crystallization kinetics in filled natural rubber. 2024..
Delaleau E, Le Magueresse T, Pelt L. Introduction des systèmes dynamiques dans l’ingénierie. Journal sur l'enseignement des sciences et technologies de l'information et des systèmes. 2024;23:0003.
Kherbachi A, Bendib A, Chouder A, Ahmed H, Benbouzid M, Motahhir S. Design and analysis of virtual impedance control scheme based on MESOGI for improving harmonic sharing of nonlinear loads. Scientific Reports. 2024;14(1):13356.
Warias J, Petersdorf L, Hövelmann S, Giri R, Lemke C, Festersen S et al. The laser pump X-ray probe system at LISA P08 PETRA III. Journal of Synchrotron Radiation. 2024;31(4):779-790.
Demilly K, Cavoit J, Marco Y, Moreau G, Dolo G, Carrere N. Estimating Fatigue Life of Carbon-Epoxy Composites: A Rapid Method coupling Thermo-Mechanical Analysis and Residual Strength. Fatigue and Fracture of Engineering Materials and Structures. 2024;47(6):1856-1867.
Behnam-Rasouli M, Challamel N, Karamodin A, Sani A. Application of the Green's function method for static analysis of nonlocal stress-driven and strain gradient elastic nanobeams. International Journal of Solids and Structures. 2024;295:112794.
Balbande S, Paraye N, Agarwal G, Das S. Microstructural Characterization and Mechanical Behaviour of Steel Surface Modified with In Situ Grown Tantalum Carbide Through TIG Arcing. Metallurgical and Materials Transactions A. 2024;55(8):2897-2912.
Kedzierski M, Cirederf Boulant D, Palazot M, Yvin M, Soccalingame L, Bruzaud S et al. Microplastiques dans les sols français : sources et occurrences. 2024..
Musa C, Zaidi M, Depriester M, Allouche Y, Naouar N, Bourmaud A et al. Development of Foam Composites from Flax Gum-Filled Epoxy Resin. Journal of Composites Science. 2024;8(7):244.
Guillou E, King A, Perrin J, Proudhon H, Weitkamp T, Shah D et al. Impact of flax fibre micro-structural features on composite damage observed through micro-CT characterisation. Composites Part A: Applied Science and Manufacturing. 2024;181:108118.
Pranesh M, Rabillard L, Cadin T, Gury B, Perrin L, Al Shakarchi F et al. Seawater and Osmosis Brines Electrolysis: Electrodeposited Surface Tailoring of 316L Stainless Steel for Electrolyzer. 2024..
Derippe G, Brouchon G, Volant C, Thomas T, Lemechko P, Bruzaud S. POLY-CHAR 2024. 2024..
Le Saos--Kauten A, Laur V, Chevalier A, Azar M, Ville J, Roquefort P et al. 3D printability criteria for the elaboration of microwaves absorbers. 2024..
Le Saos--Kauten A, Ville J, Roquefort P, Aubry T, Laur V, Chevalier A et al. Study of a new 3D printing composite for microwave absorption applications. 2024..
Meillour R, Courtois M, Doyen I, Nahed C, Carin M. Simulation multiphysique de découpe laser. Approche Level Set - ALE. 2024..
Ballésio S, Le Hong T, Dhondt M, Doudard C, Szmytka F. Manufacturing of 2507 super duplex stainless steel by laser powder-directed energy deposition: process optimization and microstructure analyses. International Journal of Advanced Manufacturing Technology. 2024;132(11-12):5663-5682.
Saos-Kauten A, Chevalier A, Maalouf A, Hoëz A, Ville J, Mattei J et al. Self-Induced Magnetic Anisotropy in 3D Printed Ferromagnetic Composites. 2024;1-2.
Taroual K, Nachtane M, Rouway M, Tarfaoui M, Faik A, Mînzu V et al. Marine Renewable-Driven Green Hydrogen Production toward a Sustainable Solution and a Low-Carbon Future in Morocco. Journal of Marine Science and Engineering. 2024;12(5):774.
Le Fur Bonnabesse A, Wolff J, Loddé B, Bodéré C, Arbab Chirani R, Pougnet R et al. Évaluation qualitative du vécu des étudiants hospitaliers brestois au sein du service d’odontologie : étude EQUAVECU. Pédagogie médicale. 2024;25(3):157-165.
Aswathappa S, Dai L, Sahaya Jude Dhas S, Matheswaran P, Kumar R, Thangavel V et al. Acoustic shock wave processing on amorphous carbon quantum dots – correlation between spectroscopic-morphological–magnetic and electrical conductivity properties. Ceramics International. 2024;50(10):17011-17019.
Gicquel C, Bruzaud S, Kedzierski M. Generation of synthetic FTIR spectra to facilitate chemical identification of microplastics. Marine Pollution Bulletin. 2024;202:116295.
Gautier E, Levieil B, Calloch S, Doudard C. A new adjustable localization operator method to compute local stresses and strains at notched bodies under multiaxial cyclic loading. International Journal of Fatigue. 2024;182:108194.
Ouaidat G, Lagroum A, Kacem A, Thuillier S. Uncertainties on the mechanical behaviour of bronze sheets: influence on the failure in bending. International Journal of Material Forming. 2024;17(3):29.
Baley C, Davies P, Troalen W, Chamley A, Dinham-Price I, Marchandise A et al. Sustainable polymer composite marine structures: Developments and challenges. Progress in Materials Science. 2024;145:101307.
Bourezig S, Benrabah A, Khoucha F, Benmansour K, Benbouzid M. An Enhanced Rule-Based Approach for Optimizing Energy Costs and Battery Health in Microgrid Systems. Electric Power Components and Systems. 2024;1-13.
Hariprasath K, Priyadharshini M, Balaji P, Pazhanivel T, Ramesh R, Maiyalagan T. V2O5-assembled NiAl-layered double hydroxide as high-performance electrode for asymmetric supercapacitor. Emergent Materials. 2024;7(4):1375-1386.
Faye A, Perali P, Augier B, Sacher M, Leroux J, Nême A et al. Fluid-Structure Interactions Response of a Composite Hydrofoil Modelled With 1D Beam Finite Elements. Journal of Sailing Technology. 2024;9(01):19-41.
Murugavel K, Hariprasath K, Priyadharshini M, Balaji P, Pazhanivel T, Kannadasan N. Impact of CTAB, a cationic surfactant, on the electrochemical performance of NiWO4 for enhanced supercapacitor performance. Ionics. 2024;30(6):3587-3593.
Tréguier A, Dubreuil V, Lecompte T, Bergerot B, Bonnardot V, Cudennec C et al. Le Changement Climatique en Bretagne, Bulletin du HCBC 2024 : Le littoral breton face aux défis climatiques. 2024..
Bourdellès M, Hachem J, Sadou S. Confidentiality Management in Complex Systems Design. 2024..
Jeanneau V, Combescure C, François M. Corrigendum to “Homogenized elasticity and domain of linear elasticity of 2D architectured materials” [Int. J. Solids Struct. 269 (2023) 112185]. International Journal of Solids and Structures. 2024;292:112668.
Le Bihan A, Marco Y, Le Saux V, Chazeau L, Chenal J, Warneboldt I et al. Crystallization field around geometric singularity in filled natural rubber. 2024..
Derippe G, Brouchon G, Volant C, Thomas T, Lemechko P, Bruzaud S. ASC spring 2024. 2024..
Viennois R, Debord R, Moll A, Legrand V, Beaudhuin M, Fréty N et al. Stability and Physical Properties of Metastable Ba–Si Clathrates. Inorganic Chemistry. 2024;63(12):5541-5551.
Jose S, Shanumon P, Kadam V, Tom M, Thomas S. Preparation, characterisation and application of biodegradable coarse wool-poly(lactic acid) sandwich composite. Polymer Bulletin. 2024;81(11):10293-10310.
Rouway M, Nachtane M, Tarfaoui M, Jamoudi Sbai S. 3D Printing of a Tidal Turbine Blade Using Two Methods of SLS and FFF of a Reinforced PA12 Composite: A Comparative Study. Sustainable Marine Structures. 2024;6(1):1-19.
Palazot M, Soccalingame L, Froger C, Jolivet C, Bispo A, Kedzierski M et al. First national reference of microplastic contamination of French soils. Science of the Total Environment. 2024;918(2):170564.
Azeem M, Ya H, Alam M, Muhammad M, M Sapuan S, Kumar M et al. Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A). Results in engineering. 2024;21:101730.
Azeem M, Ya H, Azad Alam M, Kumar M, Sajid Z, Gohery S et al. Influence of winding angles on hoop stress in composite pressure vessels: Finite element analysis. Results in engineering. 2024;21:101667.
Badulescu C, Dumont V, Diakhaté M, Bunea M, Stamoulis G, Adrien J et al. Measurement of three-dimensional volumetric displacement fields in structural porous adhesive joints, under tensile and tensile-shear load, by means of in-situ X-ray microtomography. International Journal of Adhesion and Adhesives. 2024;130:103635.
Tarfaoui M, Daly M, Kbaier R, Chihi M. Investigation of 3D printed CF-PETG composites' tensile behaviors: Synergizing simulative and real-world explorations. Composites Science and Technology. 2024;247:110385.
Barbe V, Jacquin J, Bouzon M, Wolinski A, Derippe G, Cheng J et al. Bioplastic degradation and assimilation processes by a novel bacterium isolated from the marine plastisphere. Journal of Hazardous Materials. 2024;466:133573.
Challamel N, Ruta G, Nguyen H, Wang C, Zhang Y. On angular and surface interactions in two-dimensional elastic lattices. European Journal of Mechanics - A/Solids. 2024;104:105176.
Corbel P, Jumel J. Rubber cord adhesion inflation test: Influence of envelope/confinement friction. Engineering Fracture Mechanics. 2024;298:109919.
Siniscalco D, Pessoni L, Boussonniere A, Castanet A, Billon L, Vignaud G et al. Design of an Azopolymer for Photo-Switchable Adhesive Applications. Coatings. 2024;14(3):275.
James J, Johnson R, Nair A, Joseph B, Vignaud G, Grohens Y et al. Optical and physical properties of zirconium dioxide reinforced poly (methyl methacrylate) nanocomposite films. Journal of Applied Polymer Science. 2024;141(8):e54977.
Bitar M, El Tawil T, Benbouzid M, Dinh V, Benaouicha M. On Hybrid Nanogrids Energy Management Systems—An Insight into Embedded Systems. Applied Sciences. 2024;14(4):1563.
Khoshkonesh A, Nsom B, Okhravi S, Dehrashid F, Heidarian P, Difrancesco S. Numerical investigation of dam break flow over erodible beds with diverse substrate level variations. Journal of Hydrology and Hydromechanics. 2024;72:80-94.
Keita E, Perrot A. Processing of earth-based materials: current situation and challenges ahead. RILEM Technical Letters. 2024;8:141-149.
Guennec A, Balnois E, Augias A, Bangoura M, Jaffry C, Simon Colin C et al. Investigating the anti-bioadhesion properties of short, medium chain length, and amphiphilic polyhydroxyalkanoate films. Biofouling. 2024;40(2):177-192.
Gonçalves M, Oliveira M, Thuillier S, Andrade-Campos A. Key performance indicators for heterogeneous mechanical tests. International Journal of Mechanical Sciences. 2024;264:108821.
Guillou E, Bar M, Scheel M, Falher T, Weitkamp T, Shah D et al. Use of a commingling process for innovative flax fibre reinforced unidirectional composites. Composites Part B: Engineering. 2024;270:111150.
Adeli K, Nachtane M, Faik A, Rachid A, Tarfaoui M, Saifaoui D. A deep learning-enhanced framework for sustainable hydrogen production from solar and wind energy in the Moroccan Sahara: Coastal regions focus. Energy Conversion and Management. 2024;302:118084.
Hezzi A, Elbouchikhi E, Bouzid A, Ben Elghali S, Zerrougui M, Benbouzid M. Active Disturbance Rejection Control for Distributed Energy Resources in Microgrids. Machines. 2024;12(1):67.
Derippe G, Philip L, Lemechko P, Eyheraguibel B, Meistertzheim A, Pujo-Pay M et al. Marine biodegradation of tailor-made polyhydroxyalkanoates (PHA) influenced by the chemical structure and associated bacterial communities. Journal of Hazardous Materials. 2024;462:132782.
Zaafouri I, Laurent H, Zrida M, Hichem Hamzaoui A. Mechanical characterization of PHA reinforced with Alfa fibers: influence of fiber content and strain rate. Journal of Reinforced Plastics and Composites. 2024..
Chen H, Liu L, Aït-Ahmed N, Wang Y, Charpentier J, Zaïm M et al. Theoretical analysis of AC current supply of doubly salient permanent magnet machine with quasi sinusoidal back-EMF and inductance variations. Electrical Engineering. 2024..
Gautier E, Faucheux P, Levieil B, Barrallier L, Calloch S, Doudard C. A Simple Calibration Method to Consider Plastic Deformation Influence on X-ray Elastic Constant Based on Peak Width Variation. Metals. 2024;14(1):62.
Fruleux T, Correa-Galeote D, Castro M, Poppinga S, Wang K, Le Duigou A. Controlling the Water Diffusion Inside Smart 4D-Printed HBC by Functional Channels. Advanced Functional Materials. 2024;34(4)
Théo S, Demmouche Y, Arbab Chirani S, Calloch S. Self-heating test under cyclic loading at 20kHz: determination of the heat source field. Procedia Structural Integrity. 2024;57:335-342.
Praveen K, Pillin I, Kervoelen A, Grohens Y, Thomas S. Investigations on the effect of Sol-Gel coated coir fiber reinforcement in PP/ EPDM composites. European Polymer Journal. 2024;212
Pierre T, Courtois M, Le Maux D, Carin M, Le Masson P. Gravity impact on viscosity measurements by aerodynamic levitation. High Temperatures-High Pressures. 2024;53(3):233-254.
Goudenhooft C, Melelli A, Durand S, Falourd X, Le-Bot L, Morgillo L et al. Comparison of kink-band structures and specificities of cell wall polysaccharides in modern and ancient flax fibres. Carbohydrate Polymers. 2024;344:122526.
Tintatu A, Badulescu C, Bidaud P, Le Grognec P, Adrien J, Maire E et al. Understanding of water uptake mechanisms in an epoxy joint characterized by pore-type defects. The Journal of Adhesion. 2024;100(1)
Belguedri M, Benrabah A, Khoucha F, Benbouzid M, Benmansour K. An Improved Uncertainty and Disturbance Estimator-based Speed Control for Grid-Connected Pumping Kite Wind Generator. Control Engineering Practice. 2024;143:105795.
Castres M, El Malki Alaoui A, Caisso C, Monloubou M, Arrigoni M. Static and dynamic behaviour of ultra high molecular weight poly-ethylene (UHMWPE) Tensylon® composite. Express Polymer Letters. 2024;18(10):1008-1022.
Benchikh L, Aouissi T, Aitferhat Y, Chorfi H, Abacha I, Kebaili M et al. Effect of different compatibilization routes on the mechanical, thermal and rheological properties of polypropylene/cellulose nanocrystals nanocomposites. Polymer Bulletin. 2024;81(12):11007-11026.
Casapu M, Fuiorea I, Arrigoni M. Damage assessment through cyclic load-unload tensile tests for ply-level hybrid carbon fiber composites. Express Polymer Letters. 2024;18(1):41-60.
Le Mener M, Courtois M, Daviot N, Carin M, Andry R. Heat transfer and fluid flow modeling of steel-Inconel laser welding in an overlap configuration. Journal of Laser Applications. 2024;36(4)
Wang K, Huang Y, Cheng P, Xiong Y, Le Duigou A, Peng Y et al. Novel application of dual-nozzle 3D printer for enhanced in-situ impregnation 3D printing of dry continuous fiber reinforced composites. Composites Part A: Applied Science and Manufacturing. 2024;183
Jacquin J, Budinich M, Chaffron S, Barbe V, Lombard F, Pedrotti M et al. Niche partitioning and plastisphere core microbiomes in the two most plastic polluted zones of the world ocean. Environmental Science and Pollution Research. 2024;31(28):41118-41136.
Tom M, Thomas S, Mohamed P, Seantier B, Grohens Y. Nanocellulose elastomer composites—an introduction, history and state of art. 2024;1-13.
Guin J, Han K, Charleux L, Sangleboeuf J, Ferry M, Keryvin V. A new nanometer resolution method for probing densification ratio at nanoindentation sites in glass: Unravelling discrepancies in the literature. Acta Materialia. 2024;274:120005-120005.
Tom M, Thomas S, Seantier B, Grohens Y, Pulikaparambil Kochaidrew M, Subramanian R et al. Role of nanocellulose geometric structures on the properties of green natural rubber composites. Express Polymer Letters. 2024;18(6):638-655.
Christ J, Perrot A, Ottosen L, Koss H. Rheological characterization of temperature-sensitive biopolymer-bound 3D printing concrete. Construction and Building Materials. 2024;411:134337.
Le Loeuff J, Boy V, Morançais P, Bourgougnon N, Lanoisellé J. Enhancing brown seaweed Sargassum muticum drying using pulsed electric fields and dehydration pretreatments. Drying Technology. 2024;42(11):1766-1777.
Fasse G, Sacher M, Hauville F, Astolfi J, Germain G. Multi-objective optimization of cycloidal blade-controlled propeller: An experimental approach. Ocean Engineering. 2024;299:117363.
Simon J, Hamila N, Comas-Cardona S, Binetruy C. A yarn-scale woven fabric model including significant slippage formulated within the Arbitrary Lagrangian Eulerian framework. Computer Methods in Applied Mechanics and Engineering. 2024;420:116741.
Beckett C, Bras A, Fabbri A, Keita E, Perlot C, Perrot A. Second RILEM International Conference on Earthen Construction. 2024;52
Le Maux D, Courtois M, Gaied S, Pierre T. Sub-second Surface Tension Measurement of Steels Containing Manganese in Aerodynamic Levitation. International Journal of Thermophysics. 2024;45(11)
Kumar A, Kacem A, Thuillier S. Integrated model calibration for anisotropy, hardening and rupture - Application to the clinching process. Procedia Structural Integrity. 2024;61:62-70.
Lopes Leal M, Pino L, Barati M, Saint-Sulpice L, Daniel L, Chirani S. Modeling of functional fatigue of SMA-based actuators under thermomechanical loading and Joule heating. International Journal of Fatigue. 2024;179:108055.
El Helou P, Le Bideau P, Fuentes A, Glouannec P. Experimental and numerical investigations of cake baking in mold. Journal of Food Engineering. 2024;382
Kanthila C, Boodi A, Marszal-Pomianowska A, Beddiar K, Amirat Y, Benbouzid M. Enhanced multi-horizon occupancy prediction in smart buildings using cascaded Bi-LSTM models with integrated features. Energy and Buildings. 2024;318:114442.
Gonçalves M, Thuillier S. Experimental investigation of heterogeneous mechanical tests. 2024;41:1742-1751.
Lepitre P, Doudard C, Dhondt M, Surand M, Calloch S. High Cycle Fatigue Performance of Bare 300M Steel by Self-Heating Tests Under Cyclic Loadings. Procedia Structural Integrity. 2024;57:395-403.
Boisse P, Hamila N, Lomov S, Naouar N, Vidal-Sallé E. Mechanics of Woven Fabrics. 2024;4:113-149.
Lamien B, Pierre T, Orlande H, Le Masson P, Le Maux D, Courtois M et al. Sequential estimation of high temperatures of liquid metals by using particle filter methods. High Temperatures-High Pressures. 2024;53(1-2):89-111.
Josselin M, Di Cesare N, Castro M, Colinart T, Scarpa F, Le Duigou A. Hygro-thermal coupling on 4D-printed biocomposites as key for meteosensitive shape-changing materials. Virtual and Physical Prototyping. 2024;19(1)
Rajakumaran V, Guessasma S, d'Orlando A, Melelli A, Scheel M, Weitkamp T et al. Impact of Defects on Tensile Properties of Ancient and Modern Egyptian Flax Fibers: Multiscale X-Ray Microtomography and Numerical Modeling. Fibers. 2024;12(12)
Bidi L, Le Masson P, Cicala E. Influences of laser on the energy parameters of the electric arc in the case of laser-MIG hybrid welding. International Journal of Advanced Manufacturing Technology. 2024;131(7-8):4055-4069.
Maou S, Meftah Y, Grohens Y, Kervoelen A, Magueresse A, Selmani W et al. Synergistic effects of dune sand-based silica and alkali-treated date palm fiber as efficient fillers for improving the properties of hybrid epoxy composites. Journal of Applied Polymer Science. 2024;141(46)
Nicolas Q, Samargandi R, Calloch S, Dubrana F, Gunepin F, Di Francia R. Biomechanical characteristics of the meniscocapsular junction of the posterior segment of the medial meniscus. European Journal of Orthopaedic Surgery & Traumatology. 2024..
Palazot M, Artigas L, Créach V, Boicenco L, Børsen T, Caballero A et al. Review of existing and emerging technologies for pelagic biodiversity observations. 2024..
Belguedri M, Amirat Y, Benrabah A, Khoucha F, Benbouzid M, Benmansour K. Active Disturbance Rejection Control with a Cascaded Extended State Observer for Pumping Kite Generator Systems Robust DC-Link Voltage Control. IEEE Transactions on Energy Conversion. 2024;1-12.
Civier L, Chevillotte Y, Bain C, Bles G, Damblans G, Davies P et al. Fatigue study of twisted polyamide sub-rope for floating wind turbines: Fast evaluation with heat build-up protocol and tomography study of mechanisms. International Journal of Fatigue. 2024;188:108532.
Hanifi Hachemi Amar L, Kaci A, Bessaim A, Ahmed H, Tounsi A. Bending analysis of porous microbeams based on the modified strain gradient theory including stretching effect. Structural Engineering and Mechanics. 2024;89(3):225-238.
Ketata N, Ejday M, Grohens Y, Seantier B, Guermazi N. Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites. Journal of Composite Materials. 2024;58(17):1965-1985.
Remila B, Zembouai I, Zaidi L, Alane A, Yalaoui K, Kaci M et al. Effect of PHBV-g-MA compatibilizer on the properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/polylactide blend/Diss fibers biocomposites. Journal of Polymer Science. 2024;62(20):4587-4598.
Loiseau M, Chataigner S, Créac'Hcadec R, Lepretre E, Court J, Quéméré M. Development of a Creep Mechanical Frame Setting Based on Arcan Test. Journal of Testing and Evaluation. 2024;52(1):20230225.
Hamdi W, Saadi R, Hammoudi M, Houili R, Benbouzid M, Himeur Y et al. Enhanced State and Unknown Input Estimation for Synchronous Reluctance Motor Using Takagi-Sugeno Fuzzy Proportional Multi-Integral Observer. IEEE Access. 2024;12:42908-42920.
Houssein J, Pierre T, Courtois M, Carin M. Thermal Diffusivity of Solid and Liquid 304 Stainless Steel, Iron, and Zirconium. International Journal of Thermophysics. 2024;45(9)
Oliveira A, Magalhaes E, Zilnyk K, Le Masson P, Nascimento E. Numerical Estimation of Nonlinear Thermal Conductivity of SAE 1020 Steel. Computation. 2024;12(5)
Idres C, Kaci M, Dehouche N, Bruzaud S. Eco-Friendly Chemical Modification of Agave Americana Fibers for Biocomposite Properties Enhancement. Macromolecular Symposia. 2024;413(4, SI)
Poulose A, Mathew A, Uthaman A, Lal H, Parameswaranpillai J, Mathiazhagan A et al. Facile fabrication of arecanut palm sheath based robust hydrophobic cellulose nanopapers via self-assembly of ZnO nanoflakes and its shelf-life prediction for sustainable packaging applications. International Journal of Biological Macromolecules. 2024;255
Buffet C, d'Arras P, Bourmaud A, Baley C, Hue A. Winter flax: Stem structure, fibre properties and reinforcement potential for composite materials. Industrial Crops and Products. 2024;217
Keryvin V, Mechin P, Fabing E, Pillin I, Mahe-Flahaut K, Le Palabe A. Counter-intuitive effect of the degree of cure of epoxy resins on the compressive strength of continuous fibre composites. Composites Part B: Engineering. 2024;287
Richely E, Shah D, Durand S, Gager V, Goudenhooft C, Pantaloni D et al. Bark cloth structure and properties: A naturally occurring fabric and ancestral textile craft from Uganda. Industrial Crops and Products. 2024;215:118613.
Queval J, Geslain E, Pouvreau C, Broussaud-Laloue P, Loyer S. Joining thin galvanized low carbon steel sheet to AA6056-T4 by resistance spot welding and adhesive weld bounding. Journal of Manufacturing Processes. 2024;110:70-81.
Boyer S, Levy Y, Schneider M, Nour M, Arrigoni M, Leclanche J et al. On the performance of high power pulsed repeated laser irradiation for spatial structures propulsion. 2024..
Jacquet L, Le Duigou A, Kerbrat O. A systematic literature review on holistic lifecycle assessments as a basis to create a standard in maritime industry. International Journal of Life Cycle Assessment. 2024;29(4):683–705.
Renault M, Bercelli L, Doudard C, Levieil B, Beaudet J, Calloch S. Infrared imaging surface roughness criticality assessment of Wire Arc Additive Manufactured specimens. Procedia Structural Integrity. 2024;57:22-31.
Mayer-Laigle C, Beaugrand J, Bourmaud A, Brionne L, Colinart T, Dervaux S et al. Datasets on the production routes and the properties of plant powders for manufacturing of green products. Data in Brief. 2024;56:110787.
Couillard V, Ziapkoff M, Chikhaoui K, Duigou L, Guevel Y, Cadou J. Numerical study of forced and Free vibrations of flax-epoxy composite structures with perturbation methods. 2024..
Maniadi M, Mercier N, Skorokhod A, Salah M, Bidaud P, Hudhomme P et al. Quasi 3D electronic structures of Dion-Jacobson layered perovskites with exceptional short interlayer distances. Journal of Materials Chemistry C. 2024;12(3):1061-1068.
https://pubs.rsc.org/en/content/articlelanding/2023/tc/d3tc03807f
Pierre T, Krapez J, Orlande H, Rodiet C, Masson P, Maux D et al. Multiple Inversion Techniques with Multispectral Pyrometry for the Estimation of Temperature and Emissivity of Liquid Niobium and 100c6 Steel. Heat Transfer Engineering. 2024;45(12-13):1128-1144.
Bercelli L, Guellec C, Levieil B, Doudard C, Bridier F, Calloch S. Stress ratio effect on fatigue crack growth assessment via thermoelastic stress analysis. Procedia Structural Integrity. 2024;57:437-444.
Du X, Meng J, Amirat Y, Gao F, Benbouzid M. Voltage Hysteresis Cancellation for Fast Impedance Measurements of Lithium-ion Batteries in Short Relaxation Process. IEEE Transactions on Transportation Electrification. 2024;1-1.
Azulay R, Combescure C. Predicting the post-bifurcated patterns of architectured materials using group-theoretic tools. Journal of the Mechanics and Physics of Solids. 2024;187:105631.
Du X, Meng J, Benbouzid M, Amirat Y, Gao F. Systematically Composed Binary Sequence Design Approach for Broadband Lithium-Ion Battery Impedance Measurement. IEEE Transactions on Industrial Electronics. 2024;1-10.
Sreedharan M, Vijayamma R, Liyaskina E, Revin V, Ullah M, Shi Z et al. Nanocellulose-Based Hybrid Scaffolds for Skin and Bone Tissue Engineering: A 10-Year Overview. Biomacromolecules. 2024;25(4):2136-2155.
Degorre L, Fossen T, Delaleau E, Chocron O. A Virtual Reference Point Kinematic Guidance Law for 3-D Path-Following of Autonomous Underwater Vehicles. IEEE Access. 2024;12:109822-109831.
Berranger M, Aubert M, Coubray S, Herbrich M, Jeannot R, Laurent H et al. La sidérurgie en Bourgogne-Franche-Comté avant le haut fourneau. Organisation et circulation des productions. 2023..
Cullaz T, Nematollahi M, Safaei K, Saint-Sulpice L, Pino L, Vanaei S et al. Effect of Post-treatments on the Thermomechanical Behavior of NiTiHf High-Temperature Shape Memory Alloy Fabricated with Laser Powder Bed Fusion. Shape Memory and Superelasticity. 2023;10(1):45-54.
Guedida S, Tabbache B, Nounou K, Benbouzid M. DIRECT TORQUE CONTROL SCHEME FOR LESS HARMONIC CURRENTS AND TORQUE RIPPLES FOR DUAL STAR INDUCTION MOTOR. Revue Roumaine des Sciences Techniques. Serie Électrotechnique et Énergétique. 2023;68(4):331-338.
Wang K, Lin H, Le Duigou A, Cai R, Huang Y, Cheng P et al. Geometric Accuracy and Energy Absorption Characteristics of 3D Printed Continuous Ramie Fiber Reinforced Thin-Walled Composite Structures. Chinese Journal of Mechanical Engineering. 2023;36(1):150.
James J, Johnson R, Nair A, Eapen N, Joseph B, Vignaud G et al. Optical and physical properties of zirconium dioxide reinforced poly(methyl methacrylate) nanocomposite films. Journal of Applied Polymer Science. 2023;141(8)
Massoumi S, Shakhlavi S, Challamel N, Lerbet J. Divergence and flutter instabilities of a non-conservative axial lattice under non-reciprocal interactions. Archive of Applied Mechanics. 2023;94(1):187-203.
Chevalier V, Bonnabesse A, Honari B, Duncan H. Dental and endodontic‐related stress amongst undergraduate students before and during the COVID‐19 pandemic: A mixed‐methods study. International Endodontic Journal. 2023;57:146-163.
Zizoui M, Tabbache B, Zia M, Benbouzid M. Control and Management Approach of Photovoltaic-Battery-Ultra-Capacitor Energy System in Standalone and Grid-Connected Modes. IETE journal of research. 2023;70(7):6318-6329.
Amar A, El Maani R, Radi B, El Hami A. Multi-objective optimization of the high electron mobility transistor. International Journal for Simulation and Multidisciplinary Design Optimization. 2023;14:16.
Bobda F, Mvondo R, Diakhate M, Meukam P. Thermal properties and water content of two tropical wood species as a function of the air relative humidity. Heat and Mass Transfer. 2023;60(3):449-461.
Morgillo L, Brionne L, Melelli A, Ouagne P, Scheel M, Weitkamp T et al. Elucidating links between the mechanical performance of flax fibres and their structural defects. Industrial Crops and Products. 2023;206:117722.
Gambade J, Noël H, Glouannec P, Magueresse A. Numerical model of intermittent solar hot water production. Renewable Energy. 2023;218:119368.
Rouway M, Tarfaoui M, Chakhchaoui N, Omari L, Fraija F, Cherkaoui O. Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine. 3D Printing and Additive Manufacturing. 2023;10(6)
Guillou E, Dumazert L, Caër C, Beigbeder A, Ouagne P, Le Saout G et al. In-situ monitoring of changes in ultrastructure and mechanical properties of flax cell walls during controlled heat treatment. Carbohydrate Polymers. 2023;321:121253.
Batlle Martin M, Harris J, Filipot J, Hulin F, Tassin A, Renaud P. Deep water focused breaking wave loads on a fixed cylinder. Coastal Engineering. 2023;186:104397.
Țîntatu A, Bidaud P, Badulescu C, Le Grognec P, Adrien J, Bonnard G et al. Robust water diffusion modeling in a structural polymer joint based on experimental X-ray tomographic data at the micrometer scale. Polymer Degradation and Stability. 2023;218:110594.
Chen H, Liu L, Amirat Y, Zhou Z, Aϊt-Ahmed N, Benbouzid M. Model-Free Control for Doubly Salient Permanent Magnet-Generator-Based Tidal Stream Turbine Considering Flux-Weakening Operation. Journal of Marine Science and Engineering. 2023;11(12):2276.
Cheng P, Peng Y, Wang K, Le Duigou A, Ahzi S. 3D printing continuous natural fiber reinforced polymer composites: A review. Polymers for Advanced Technologies. 2023;35(1):e6242.
Better B, Arrigoni M, El Malki Alaoui A, Guetta S, Boustie M, Zagouri D et al. Sensitivity study of the pressure load parameters of laser shock on CFRP and its influence on the back-face velocity signal. 2023..
Derippe G, Brouchon G, Volant C, Thomas T, Lemechko P, Bruzaud S. 51ème Colloque National du Groupe Français des Polymères. 2023..
Colon X, Galpin B, Mahéo L, Grolleau V. Reaching Large Strains During Simple Shear Experiments Thanks to Sequential Re-Machining of the Free Edges. Experimental Mechanics. 2023;64(1):113-127.
Rahali Y, Jumel J, Stamoulis G, Le Grognec P. Fracture properties evaluation of structural adhesives using the dual actuator test frame and digital image correlation technique. The Journal of Adhesion. 2023;100(11):1-25.
Benrabah A, Khoucha F, Raza A, Benbouzid M. Sensorless robust control for PMSG wind energy conversion systems based on smith predictor ADRC and SMO-PLL estimation. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2023;42(6):1938-1958.
Tarfaoui M, Qureshi Y, Chihi M, Daly M. Mechanical characterisation of Aerosil-polycarbonate-based ceramic nanocomposites: 3D printing versus injection moulding technology. Journal of Composite Materials. 2023;57(29):4615-4634.
Congard Y, Saint-Sulpice L, Pino L, Barati M, Mordeniz J, Arbab Chirani S et al. Low cycle fatigue lifetime prediction of superplastic shape memory alloy structures. Journal of the mechanical behavior of biomedical materials. 2023;147:106122.
Carbone S, Proietto F, Bonafede F, Oliveri R, Patella B, Ganci F et al. Behavior of a forest of NiFe nanowires in KOH and NaCl solution for water electrolysis. Electrochimica Acta. 2023;467:143120.
Challamel N, Ferretti M, Luongo A. Multi-degenerate hill-top bifurcation of Fermi–Pasta–Ulam softening chains: Exact and asymptotic solutions. International Journal of Non-Linear Mechanics. 2023;156:104509.
Marichal L, Bagnard L, Sire O, Vendrely C, Bruckert F, Weidenhaupt M. Phenol-soluble modulins form amyloids in contact with multiple surface chemistries. Biochimica et Biophysica Acta (BBA) - General Subjects. 2023;1867(11):130450.
Lerbet J, Challamel N, Nicot F, Darve F. Intrinsic incremental evolution of hypoelastic discrete mechanical systems. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2023;103(11)
Yvin M, Kedzierski M, Le Lan M, Mondy S, Bruzaud S. Degradation and end-of-life of biodegradable plastic mulches in soils. 2023..
Le Saux M, Le Bail J, Becker J, Caër C, Charrier P, Le Saux V et al. Statistical characterization of microcellular polyurethane foams microstructure based on 2D and 3D image analysis. Journal of Cellular Plastics. 2023;59(5-6):395-417.
Ghazvini M, Hafez M, Mandin P, Kim M. Experimental study of bubble growth on novel fin structures during pool boiling. International Journal of Multiphase Flow. 2023;168:104568.
Congard Y, Saint-Sulpice L, Pino L, Barati M, Mordeniz J, Arbab Chirani S et al. Low cycle fatigue lifetime prediction of superplastic shape memory alloy structures: Application to endodontic instruments. Journal of the mechanical behavior of biomedical materials. 2023;147:106122.
Le Saos--Kauten A, Laur V, Chevalier A, Azar M, Ville J, Roquefort P et al. Etude de nouveaux composites absorbants hyperfréquences appliqués à l'impression 3D. 2023..
Aubry T, Huitric J, Médéric P, Roquefort P, Ville J, Beuguel Q et al. Rhéologie de systèmes composites à matrice polymère: de la structuration vers l'impression 3D. 2023..
Rashid H, Benbouzid M, Amirat Y, Berghout T, Titah-Benbouzid H, Mamoune A. Biofouling Detection and Extent Classification in Tidal Stream Turbines via a Soft Voting Ensemble Transfer Learning Approach. 2023;01-06.
Rashid H, Benbouzid M, Titah-Benbouzid H, Amirat Y, Berghout T, Mamoune A. Mapping a Machine Learning Path Forward for Tidal Stream Turbines Biofouling Detection and Estimation. 2023;1-6.
Kanthila C, Boodi A, Beddiar K, Amirat Y, Benbouzid M. Occupancy Prediction in Buildings Using Cascaded LSTM Model. 2023;1-6.
Brateau M, Kerampran S, Bouchama A, Clough A, Arrigoni M. Study on the interaction between a projectile and the barrel. 2023;2:1493-1501.
Le Bihan A, Marco Y, Le Saux V, Chazeau L, Chenal J, Warneboldt I et al. Effect of stress relaxation on mechanically induced crystallization in natural rubber. 2023..
Guruprasad T, Keryvin V, Kermouche G, Marthouret Y, Sao Joao S. Compressive behaviour of carbon fibres micropillars by in situ SEM nanocompression. Composites Part A: Applied Science and Manufacturing. 2023;173:107699.
https://www.sciencedirect.com/science/article/pii/S1359835X23002750
Li J, Hamila N, Guzman-Maldonado E, L'Hostis G, Wang P. Improved hyperelastic model for simulating the forming of biaxial braided fabrics. Composite Structures. 2023;321:117263.
Nieto-Fuentes J, Virazels T, Jacques N, Rodríguez-Martínez J. Gas gun driven dynamic expansion of 3D-printed AlSi10Mg rings. International Journal of Impact Engineering. 2023;180:104556.
Struyven F, Sellier M, Mandin P. Review: Interactions between electrogenerated bubbles and microfluidic phenomena. International Journal of Hydrogen Energy. 2023;48(84):32607-32630.
Corbel P, Jumel J. Simulation of fluid driven crack propagation along metal/elastomer interface. Mechanics of Materials. 2023;185:104774.
Chikhaoui K, Mosquera R, Guevel Y, Cadou J, Liberge E. Grassmann interpolation of proper orthogonal modes for robust linear and nonlinear dynamic analysis against parameter variation in composite structures. Finite Elements in Analysis and Design. 2023;224:103991.
Rahmouni D, Benbouzid M, Mouss M, Mouss L. Efficient Diagnosis of Photovoltaic Cell Degradation Based on Deep Learning Using Drone Thermal Imagery. International Journal on Energy Conversion (IRECON). 2023;11(5):153.
Colon X, Grolleau V, Galpin B, Roth C, Mohr D. In-plane Torsion Tests, Toward Large Strains Under Monotonic and Cyclic Loading of Sheet Metals. 2023;Volume 4:754-763.
Kaushik S, Sonebi M, Perrot A, Amato G, Das U. Effect of Nanoclay on the Printability of Extrusion-based 3D Printable Mortar. NanoWorld Journal. 2023;9
Xie S, Martinez Lopez B, Chalier P, Saulnier B, Reddy N, Grohens Y et al. Polycaprolactone—Eugenol systems: Interactions, retention and diffusion of the bioactive compound. Journal of Applied Polymer Science. 2023;140(36)
Drouet D, Prod'Homme G, Hanus J, Blanc L, Kerampran S, Le Clanche J et al. Investigation on the dual use of thermal insulation materials as blast mitigation solution. 2023..
Reinders A, Le Clanche J, Arrigoni M, Grégoire Y, Monloubou M, Kerampran, S. Blast wave mitigation by liquid foams. 2023..
Kerihuel D, Viot P, Mahéo L, Laurent H. Behavior of Polypropylene Foam under Hydrostatic Loading. 2023..
Simon J, Comas-Cardona S, Binetruy C, Masseteau B, Hamila N. An analytical friction model for fibre tow slippage in Tailored Fibre Placement preforms based on pull-out experiments. Composites Part B: Engineering. 2023;264:110906.
Caisso C, Dagorn N, Albouy W, Arrigoni M, Thévenet D. Experimental and numerical investigations of a soft projectile impact three-point bending (SPITPB) test for adhesion assessment under dynamic loading. European Journal of Mechanics - A/Solids. 2023;101:105060.
Vilar M, Khaneh Masjedi P, Hadjiloizi D, Weaver P. Analytical interlaminar stresses of composite laminated beams with orthotropic tapered layers. Composite Structures. 2023;319:117063.
Niknafs Kermani N, Advani S, Férec J. Orientation predictions of fibers within 3D printed strand in material extrusion of polymer composites. Additive Manufacturing. 2023;77:103781.
Lancellotti P, Aqil A, Musumeci L, Jacques N, Ditkowski B, Debuisson M et al. Bioactive surface coating for preventing mechanical heart valve thrombosis. Journal of Thrombosis and Haemostasis. 2023;21(9):2485-2498.
Varela H, Barluenga G, Perrot A. Extrusion and structural build-up of 3D printing cement pastes with fly ash, nanoclays and VMAs. Cement and Concrete Composites. 2023;142:105217.
Le Marre M, Mandin P, Lanoisellé J, Bezuglov R. Experimental study on performance predictions of pumps as turbine. Energy Conversion and Management. 2023;292:117235.
Boulant-Cirederf D, Bruzaud S, Deportes I, Kedzierski M. Microplastic contamination of organic fertilisers applied to agricultural soils. 2023..
Scolan Y, Etienne S. Pressure analysis in nonlinear waves by revisiting the breaking wave onset. European Journal of Mechanics - B/Fluids. 2023;101:246-256.
Mahé F, Binetruy C, Advani S, Férec J, Eck B. A revisited compression flow model for concentrated suspensions with fiber-friction interactions. Journal of Non-Newtonian Fluid Mechanics. 2023;319:105090.
Sarou L, Couchaux M, Hjiaj M, Sire S, Douroux J. Stiffness of L‐stubs loaded in compression. ce/papers. 2023;6:1293-1298.
Sarou L, Couchaux M, Hjiaj M, Sire S, Douroux J. Elastic behavior of riveted double angle connections in tension. ce/papers. 2023;6:1299-1304.
Benyamina F, Ahmed H, Benrabah A, Khoucha F, Achour Y, Benbouzid M. Sequence extraction-based low voltage ride-through control of grid-connected renewable energy systems. Renewable and Sustainable Energy Reviews. 2023;183:113508.
Tamayo-Vegas S, Lafdi K, Tarfaoui M, Lafdi K, Daly M. Analysis of Acid Diffusion Effects on Physical Properties of Polymer Composites. Applied Mechanics. 2023;4(3):974-989.
Barry M, Clément M, Rangeard D, Jacquet Y, Perrot A. Manufactured crushed sand: packing fraction prediction and influence on mortar rheology. Materials and structures. 2023;56(7):139.
de Quelen F, Jardé E, Le Marechal C, Lendormi T, Menasseri-Aubry S, Beline F. APIVALE scientific consortium: integrated approach for organic effluent recycling and valorisation. 2023;:856.
Yahia A, Perrot A, Feys D, Khayat K, Sonebi M, Kawashima S et al. Viscoelastic properties of fresh cement paste: measuring procedures and influencing parameters. RILEM Technical Letters. 2023;8:23-30.
Zine M, Labiod C, Ikhlef M, Srairi K, Benbouzid M. Improving Efficiency and Power Output of Switched Reluctance Generators through Optimum Operating Parameters. Machines. 2023;11(8):816.
Lagain B, Heuzé T, Racineux G, Arrigoni M. Numerical analysis of cross‐sectional effects during the magnetic pulse disassembly of laminate structures. Advanced Engineering Materials. 2023..
Márquez Costa J, Jumel J. Influence of adhesive rheological behavior on stable mode II crack propagation in bonded interface subjected to shear loading condition. Mechanics of Advanced Materials and Structures. 2023;31(25):6716-6730.
Tarhan Y, Perrot A. Reinforcement of 3D printable earth-based mortar with natural textile material. Materials Today: Proceedings. 2023..
Lima R, Bernasconi A, Carboni M, Carrere N, Teixeira de Freitas S. Uncovering the toughening mechanisms of bonded joints through tailored CFRP layup. Composites Part B: Engineering. 2023;263:110853.
Hafez M, Ghazvini M, Mandin P, Kim M. Numerical investigation of three-dimensional flow over dual particles during settling. Powder Technology. 2023;426:118617.
Soccalingame L, Palazot M, Kedzierski M, Bruzaud S. Sunlight and marine weathering of poly(oxymethylene): Evolution of the physico-chemical properties. Marine Pollution Bulletin. 2023;193:115070.
Akbar I, Hadrouz M, Mansori M, Tarfaoui M. Thermomechanical shape memory testing of 4D printed novel material rhombus-shape structure. Applied Materials Today. 2023;33:101876.
Li Q, Le Duigou A, Kumar Thakur V, Liu L, Leng J, Scarpa F. Three-dimensional water diffusion and modelling of flax/shape memory epoxy composites. Composites Part A: Applied Science and Manufacturing. 2023;171:107574.
Chen H, Li J, Gao N, Han J, Aït-Ahmed N, Benbouzid M. Adaptive backstepping fast terminal sliding mode control of dynamic positioning ships with uncertainty and unknown disturbances. Ocean Engineering. 2023;281:114925.
Medekhel L, Srairi K, Labiod C, Benbouzid M, Meneceur R. Theoretical Design and Experimental Implementation of a Three-Phase Two-Level Inverter with an Adapted Gate Driver Based on Bootstrap Circuit for Grid-Connected Renewable Energy Systems. International Journal on Energy Conversion (IRECON). 2023;11(4):122.
Benkadi H, Ghennam T, Marouani K, Rizoug N, Benbouzid M, Francois B. A New Space Vector Modulation Pulse Width Modulation Technique for an Optimal Total Harmonic Distortion of a Three-Phase Voltage Source Inverter Power System. International Journal on Energy Conversion (IRECON). 2023;11(4):109.
Caneva G, Bourmaud A, Bellini A, Melelli A. The flax in the “Flora’s image” in the Ariadne House (Pompeian area, Italy) as a symbol of feminine in a wedding sacred to the afterlife. Rendiconti Lincei. Scienze Fisiche e Naturali. 2023;34:907-919.
Ahmadi Heidari N, Fathi M, Hamdami N, Taheri H, Siqueira G, Nyström G. Thermally Insulating Cellulose Nanofiber Aerogels from Brewery Residues. ACS Sustainable Chemistry & Engineering. 2023;11(29):10698-10708.
Lopes Leal Junior M, Pino L, Barati M, Saint-Sulpice L, Daniel L, Arbab Chirani S. FUNCTIONAL FATIGUE OF SMA-BASED ACTUATORS. 2023;35-46.
Le Bihan A, Marco Y, Le Saux V, Chazeau L, Chenal J, Warneboldt I. Effect of stress relaxation on mechanically induced crystallization in natural rubber. 2023..
Belhaouzi A, Halimi Y, Zyade S, Tarfaoui M, Rouway M, Tahiri M. Modeling effective elastic and thermal conductivity of composite materials reinforced with plastic waste: Analytical and numerical approaches. Polymer Composites. 2023;44(7):3964-3976.
Kedzierski M, Cirederf-Boulant D, Palazot M, Yvin M, Bruzaud S. Continents of plastics: An estimate of the stock of microplastics in agricultural soils. Science of the Total Environment. 2023;880:163294.
Boyer A, Demazel N, Coër J, Carin M, Laurent H, Oliveira M. A novel hydraulic bulge test in hot forming conditions. Journal of Materials Processing Technology. 2023;316:117917.
Robin A, Arhant M, Davies P, Lejeune S, Lolive E, Bonnemains T et al. Effect of aging on the in-plane and out-of-plane mechanical properties of composites for design of marine structures. Composites Part C: Open Access. 2023;11:100354 (11p.).
Berghout T, Benbouzid M. PrognosEase: A data generator for health deterioration prognosis. SoftwareX. 2023;23:101461.
Bellil S, Pantaloni D, Shah D, Duigou A, Baley C, Beaugrand J et al. Prediction of interfacial behaviour of single flax fibre bonded to various matrices by simulation of microdroplet test. Composites Part C: Open Access. 2023;11:100351.
Lagain B, Heuzé T, Racineux G, Arrigoni M. An analytical approach of design for recycling of laminate structures by the use of magnetic pulse disassembling. International Journal of Solids and Structures. 2023;275:112290.
Bourgougnon N, Stiger-Pouvreau V, Pliego-Cortés H, Hardouin K, Corbanini C, Ponce Rey L et al. Caribbean Sargassum: a malediction or a golden resource. 2023..
Pehlivan Solak H, Wackers J, Pellegrini R, Serani A, Diez M, Perali P et al. Hydrofoil Optimization via Automated Multi-Fidelity Surrogate Models. 2023..
Benchikh L, Yazid A, Maya K, Hichem C, Ilyes A, Melia G et al. Acetylation of Cellulose Nanocrystals Extracted from Cotton for Drilling Fluid Application: Structural and Thermal Characterization. International Journal of Nanoscience. 2023;22(05)
Landebrit L, Sánchez-Martín R, Meisterzheim A, Palazot M, Soccalingame L, Kedzierski M et al. Caractérisation des grands microplastiques dans les fleuves : une approche novatrice et harmonisée par Py-GC-MS/MS. 2023..
Richely E, Beaugrand J, Coret M, Binetruy C, Ouagne P, Bourmaud A et al. In Situ Tensile Testing under High-Speed Optical Recording to Determine Hierarchical Damage Kinetics in Polymer Layers of Flax Fibre Elements. Polymers. 2023;15(13):2794.
Audren M, Perrot A, Guihéneuf S, Rangeard D, Leborgne T. Vibration as a Solution to Improve Mechanical Performance of Compressed Earth Blocks. 2023;45:199-211.
Amirat Y, Elbouchikhi E, Delpha C, Benbouzid M, Diallo D, Wang T. Tidal stream turbine monitoring and fault diagnosis. 2023;139-179.
Elbouchikhi E, Amirat Y, Yao G, Benbouzid M. Tidal stream turbine fault-tolerant control. 2023;93-138.
Royne S, Laurent H, Maillard A. Forming of a cylindrical cup in 7075-T6 under warm temperature conditions. 2023;1284(1):012026.
Maison A, Roulet M, Bencheikh I, Demmouche Y, Gaillet L, Franchet M et al. Testing monitoring technologies on dynamic subsea power cables to detect mechanical failures. 2023..
Collet F, Mertens S, Faria P, Amziane S, Colinart T, Magniont C et al. Rilem TC 275 HDB – International RRT on MBV Measurement of Vegetal Concrete. 2023;43:1279-1287.
Collet F, Mertens S, Faria P, Amziane S, Colinart T, Magniont C et al. RILEM TC 275 HDB - Interlaboratory RRT on MBV measurement of vegetal concrete. 2023..
Renaud P, Hulin F, Batlle Martin M, Scolan Y, Jacques N, Harris J et al. Semi-Analytical Load Models Accounting for the Tilt and Motion of a Cylinder Impacted by a Plunging Breaking Wave. 2023..
Derippe G, Volant C, Thomas T, M. D, Lemechko P, Bruzaud S. Conference times of polymers and composites. 2023..
Vong C, Chevalier A, Maalouf A, Rosnarho J, Ville J, Laur V. 3D-Printed Multi-Material Multilayer Wideband Microwave Absorber. 2023;756-759.
Collet F, Mertens S, Faria P, Amziane S, Colinart T, Magniont C et al. Rilem TC 275 HDB – International RRT on MBV Measurement of Vegetal Concrete. 2023;43:1279-1287.
Vong C, Chevalier A, Azar M, Rosnarho J, Ville J, Laur V. 3D-printed multi-materials wideband microwave absorbers. 2023..
Fouillen K, Duncan H, de Vries P, Chevalier V. Development and preliminary validation of an Objective Structured Assessment of Technical Skills (OSATS) for a partial pulpotomy procedure. International Endodontic Journal. 2023;56:1011-1021.
Imar M, Diakhate M, Moungam L, Nsom B, Meukam P, Talla A. Valorization of cotton waste ash in the formulation of compressed earth blocks. Mechanics of Advanced Materials and Structures. 2023;31(21):5220-5233.
Le Loeuff J, Boy V, Morançais P, Hardouin K, Bourgougnon N, Lanoisellé J. Air drying of brown algae Sargassum: Modelling and recovery of valuable compounds. Journal of Applied Phycology. 2023;35(4):1879-1892.
Kedzierski M, Cirederf Boulant D, Yvin M, Palazot M, Soccalingame L, Bruzaud S. État des lieux de la recherche française sur les microplastiques dans les sols. 2023..
Belhaouzi A, Laaouidi H, Zyade S, Raji Y, Halimi Y, Tahiri M. Exploring the Thermophysical Properties of the Thermal Conductivity of Pigmented Polymer Matrix Composites with Barium Titanate. Journal of Composites Science. 2023;7(6):220.
Boulant-Cirederf D, Bruzaud S, Deportes I, Kedzierski M. Microplastic contamination of organic fertilisers applied to agricultural soils. 2023..
Yvin M, Le Lan M, Mondy S, Kedzierski M, Faivre-Primot C, Estorgues V et al. Dégradation des paillages biodégradables dans les sols agricoles. 2023..
Daly M, Tarfaoui M, Chihi M, Bouraoui C. FDM technology and the effect of printing parameters on the tensile strength of ABS parts. International Journal of Advanced Manufacturing Technology. 2023;126(11-12):5307-5323.
Carbone S, Caruso A, Patella B, Miceli R, Pellitteri F, Mandin P et al. Ni-Fe-P Alloy Nanostructured Electrodes for Alkaline Electrolyzer. 2023..
Li Y, Elishakoff I, Challamel N. Analytical Calculation of Static Deflection of Biperiodic Stepped Euler–Bernoulli Beam. International Journal of Structural Stability and Dynamics. 2023;23(16n18)
Boustie M, Arrigoni M, Jerome J, Berthe L, Bolis C, Jeandin M et al. The Flier Laser Shock Adhesion Test as an Extension of the LASAT Test for Thick Coating/Substrate Systems. International Journal of Solids and Structures. 2023;275(18):271-275.
Béline F, Couvert A, de Quelen F, Girault R, Houot S, Jeuffroy M et al. La méthanisation agricole en France : contribution à la transition agroécologique ou opportunité énergétique ? 2023;France.
Ghiglione J, Barbe V, Bruzaud S, Burgaud G, Cachot J, Eyheraguibel B et al. Mission Tara Microplastics: a holistic set of protocols and data resources for the field investigation of plastic pollution along the land-sea continuum in Europe. Environmental Science and Pollution Research. 2023..
Jabeur R, Corbel C, Loyer P, Le Parc A, Le Grand A, Comte A et al. Identification of Novel Compounds Inhibiting the Kinase Activity of the CDK5/p25 Complex via Direct Binding to p25. Biochemistry. 2023;62(9):1452-1463.
Tarfaoui M, Qureshi Y, Chihi M, Mertani B. Influence of infill density on the dynamic behavior of 3D-printed CF-PEKK composites using split Hopkinson’s pressure bars. International Journal of Advanced Manufacturing Technology. 2023;127:471–486.
Tang Y, Wang T, Zhang F, Benbouzid M. Four-state active fault diagnosis method for cascaded H-bridge multilevel inverter. Measurement - Journal of the International Measurement Confederation (IMEKO). 2023;213:112692.
Mounier H, Join C, Delaleau E, Fliess M. Active queue management for alleviating Internet congestion via a nonlinear differential equation with a variable delay. Annual Reviews in Control. 2023;55:61-69.
Martin E, Carrere N. A fast procedure to predict the notch strength with the coupled criterion. Engineering Fracture Mechanics. 2023;284:109257.
Abdelkadir A, Victor J, Vignaud G, Marcel C, Sahal M, Maaza M et al. Analysis of the temperature dependent optical properties of V1−xWxO2 thin films. Thin Solid Films. 2023;772:139805.
Jeanneau V, Combescure C, François M. Homogenized elasticity and domain of linear elasticity of 2D architectured materials. International Journal of Solids and Structures. 2023;269:112185.
Berrabah I, Dehouche N, Kaci M, Bruzaud S, Delaite C, Deguines C et al. A bionanocomposite of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/ZnO-nanoparticles intended for food packaging. International Journal of Biological Macromolecules. 2023;238:124162.
Renaud P, Martin M, Hulin F, Harris J, Filipot J, Scolan Y. Semi-analytical load models describing the progressive immersion of a fixed vertical cylinder in a breaking wave. Ocean Engineering. 2023;276:114116.
Rashid H, Benbouzid M, Titah-Benbouzid H, Amirat Y, Mamoune A. Tidal Stream Turbine Biofouling Detection and Estimation: A Review-Based Roadmap. Journal of Marine Science and Engineering. 2023;11(5):908.
Lopes Leal Júnior M, Pino L, Barati M, Saint-Sulpice L, Daniel L, Arbab Chirani S. Electric resistivity evolution in NiTi alloys under thermomechanical loading: phase proportioning, elasticity and plasticity effects. Smart Materials and Structures. 2023;32(6):065002.
Gonçalves M, Oliveira M, Sandrine T, António A. On the comparison of heterogeneous mechanical tests for sheet metal characterization. 2023;28:1121-1130.
El Assaad M, Colinart T, Lecompte T. Thermal conductivity assessment of moist building insulation material using a Heat Flow Meter apparatus. Building and Environment. 2023;234:110184.
Le Saos--Kauten A, Laur V, Chevalier A, Azar M, Ville J, Roquefort P et al. Etude d'une nouvelle matrice polymère appliquée au développement de composites magnétiques imprimables. 2023..
Palazot M, Kedzierski M, Deportes I, Bruzaud S. MICROSOF : Recherche de microplastiques dans 33 sols français. 2023..
Deportes I, Thévenin N, Mortas N, Rabat C, Cirederf Boulant D, Kedzierski M et al. Recherche des microplastiques dans les Produits Résiduaires Organiques. 2023..
Kachkouch F, Franklin H. The Rayleigh mode at the plane boundary between a liquid and a double porosity medium. Journal of the Acoustical Society of America. 2023;153(4):2518.
Chen H, Sun Y, Cai Y, Charpentier J, Han J, Aït-Ahmed N et al. Improved torque compensation control based-maximum power point tracking strategy for large scale floating offshore wind turbines. Ocean Engineering. 2023;273:113974.
Akbar I, El Hadrouz M, El Mansori M, Tarfaoui M. Investigation of thermo-mechanical shape memory signatures of 3D printed and Injection molded polymers. CIRP Journal of Manufacturing Science and Technology. 2023;41:277-291.
Jordan B, Grolleau V, Mohr D. Using surround DIC to extract true stress–strain curve from uniaxial tension experiments. International Journal of Solids and Structures. 2023;268:112171.
Friha O, Ferrag M, Benbouzid M, Berghout T, Kantarci B, Choo K. 2DF-IDS: Decentralized and differentially private federated learning-based intrusion detection system for industrial IoT. Computers & Security. 2023;127:103097.
El Assaad M, Colinart T, Lecompte T. Thermal conductivity assessment of moist building insulation material using a Heat Flow Meter apparatus. Building and Environment. 2023;234:110184.
de Luycker E, Hamila N. Modeling of hyperelastic bending of fibrous media using second-gradient isogeometric analysis: Weaving and braiding applications. Composites Part A: Applied Science and Manufacturing. 2023;167:107415.
Yvin M, Kedzierski M, Le Lan M, Bruzaud S. BIOMALEG : Fin de vie des paillages biodégradables dans le sol. 2023..
El Harouri K, El Hani S, Naseri N, Elbouchikhi E, Benbouzid M, Skander-Mustapha S. Hybrid Control and Energy Management of a Residential System Integrating Vehicle-to-Home Technology. Designs. 2023;7(2):52.
Li J, Hamila N, L'Hostis G, Wang P. Shear deformation characteristics under tensile stress during forming of tubular braided fabrics. Composites Part A: Applied Science and Manufacturing. 2023;167:107458.
Toumi S, Amirat Y, Benbouzid M, Elbouchikhi E, Zhou Z. Inter-Turn Fault Resilient Controls of a PMSM-Based Tidal Stream Turbine. International Journal on Energy Conversion (IRECON). 2023;11(2):34.
Zhang Z, Wang T, Chen G, Amirat Y. A Serial Fault-Tolerant Topology Based on Sustainable Reconfiguration for Grid-Connected Inverter. Journal of Marine Science and Engineering. 2023;11(4):751.
Chen H, Zhang D, Chen P, Li N, Perrot A. A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing. Materials. 2023;16(7):2661.
Bai Y, Latrache N, Kelai F, Crumeyrolle O, Mutabazi I. Viscoelastic instabilities of Taylor–Couette flows with different rotation regimes. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2023;381(2246)
Farrugia M, Le Corvec M, Renou C, Nousbaum J, Ouizeman D, Sire O et al. Mid-Infrared Spectroscopy as a New Tool for Ruling Out Spontaneous Bacterial Peritonitis: A Proof-of-Concept Study. Biomedicines. 2023;11(3):838.
Bernolin C, Stamoulis G, Bidaud P, Dagorn N, Albouy W, Thévenet D. Assessment of the fracture properties of adhesively bonded joints submitted to fatigue loads using the Arcan fixture. Fatigue and Fracture of Engineering Materials and Structures. 2023;46(3):784-797.
Nachtane M, Tarfaoui M, Abichou M, Vetcher A, Rouway M, Aâmir A et al. An Overview of the Recent Advances in Composite Materials and Artificial Intelligence for Hydrogen Storage Vessels Design. Journal of Composites Science. 2023;7(3):119.
Le Duigou A, Grabow M, Castro M, Toumi R, Ueda M, Matsuzaki R et al. Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer. Heliyon. 2023;9(3):e13581.
Dubreuil V, Treguier A, Bergerot B, Bessonneau V, Bonnardot V, Cudennec C et al. Le changement climatique en Bretagne. 2023;27 p..
Saade C, Le Grognec P, Couchaux M, Hjiaj M. Elastoplastic bifurcation analysis for the lateral–torsional buckling of straight beams. International Journal of Solids and Structures. 2023;264:112106.
Do V, Le Grognec P, Rohart P. Closed-form solutions for the elastic–plastic buckling design of shell structures under external pressure. European Journal of Mechanics - A/Solids. 2023;98:104861.
Goron M, Langrand B, Jacques N, Fourest T, Tassin A, Robert A et al. Simulation of water entry–exit problems highlighting suction phenomena by coupled Eulerian–Lagrangian approach. European Journal of Mechanics - B/Fluids. 2023;100:37-51.
Toumi S, Amirat Y, Elbouchikhi E, Zhou Z, Benbouzid M. Techno-Economic Optimal Sizing Design for a Tidal Stream Turbine–Battery System. Journal of Marine Science and Engineering. 2023;11(3):679.
Bercelli L, Levieil B, Doudard C, Malek B, Bridier F, Ezanno A. Use of infrared thermography to model the effective stress ratio effect on fatigue crack growth in welded T-joints. Engineering Fracture Mechanics. 2023;279:109061.
Boudounit H, Tarfaoui M, Saifaoui D. Fatigue analysis of wind turbine composite blade using finite element method. Wind Engineering. 2023;47(3):706-721.
Degorre L, Delaleau E, Chocron O. A Survey on Model-Based Control and Guidance Principles for Autonomous Marine Vehicles. Journal of Marine Science and Engineering. 2023;11(2):430.
Paul-Pont I, Ghiglione J, Gastaldi E, ter Halle A, Huvet A, Bruzaud S et al. Discussion about suitable applications for biodegradable plastics regarding their sources, uses and end of life. Waste Management. 2023;157:242-248.
Ma Z, Chen H, Han J, Chen Y, Kuang J, Charpentier J et al. Optimal SOC Control and Rule-Based Energy Management Strategy for Fuel-Cell-Based Hybrid Vessel including Batteries and Supercapacitors. Journal of Marine Science and Engineering. 2023;11(2):398.
Combescure C, Healey T, Treacy J. A Group-Theoretic Approach to the Bifurcation Analysis of Spatial Cosserat-Rod Frameworks with Symmetry. Journal of Nonlinear Science. 2023;33(2):32.
Gautier E, Levieil B, Calloch S, Ezanno A, Doudard C. Improvement of the Adjustable Localization Operator identification based on the confined plasticity zone shape for multiaxial elasto-plastic cyclic predictions. International Journal of Solids and Structures. 2023;262-263:112077.
Bourmaud A, Konschak K, Buffet C, Calatraba M, Rudolph A, Kervoëlen A et al. A Circular Approach for the Valorization of Tomato By-Product in Biodegradable Injected Materials for Horticulture Sector. Polymers. 2023;15(4):820.
Luo S, Jiang Y, Thuillier S, Castany P, Zeng L. Numerical Analysis on the Spatiotemporal Characteristics of the Portevin-Le Chatelier Effect in Ti-12Mo Alloy. Metals and Materials International. 2023;29(2):269-279.
Sarou L, Couchaux M, Hjiaj M, Sire S, Douroux J, Desbordes A. Compressive stiffness of L-stubs in contact with rigid and flexible foundations. Journal of Constructional Steel Research. 2023;201:107675.
Bernard C, Hin S, Charleux L, Roux É, Yokoyama Y, Tanguy A et al. Intense shear band plasticity in metallic glass as revealed by a diametral compression test. Materials Science and Engineering: A. 2023;864:144533.
Oukhlef A, Latrache N, Champmartin S, Maiss M. Identification of the pore size distribution of a porous medium using oscillating Newtonian fluids. Physics Letters A. 2023;460:128615.
Palazot M, Kedzierski M, Deportes I, Bruzaud S. MICROSOF : Recherche de microplastiques dans 33 sols français. 2023..
Boukhlouf A, Hammoudi M, Saadi R, Benbouzid M. Hardware-in-the-loop implementation of an unknown input observer for synchronous reluctance motor. ISA Transactions. 2023;133:485-494.
Palazot M, Froger C, Kedzierski M, Bruzaud S. Projet MICROSOF : Recherche de microplastiques dans 33 sols français. 2023;34.
Pernod L, Sacher M, Wackers J, Augier B, Bot P. Free-Surface Effects on Two-Dimensional Hydrofoils by RANS-VOF Simulations. Journal of Sailing Technology. 2023;8(01):24-38.
Massoumi S, Challamel N, Lerbet J, Wautier A, Nicot F, Darve F. Shear vibration modes of granular structures: Continuous and discrete approaches. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2023;103(6)
Smadi A, Khoucha F, Amirat Y, Benrabah A, Benbouzid M. Active Disturbance Rejection Control of an Interleaved High Gain DC-DC Boost Converter for Fuel Cell Applications. Energies. 2023;16(3):1019.
Berghout T, Benbouzid M, Amirat Y, Yao G. Lithium-ion Battery State of Health Prediction with a Robust Collaborative Augmented Hidden Layer Feedforward Neural Network Approach. IEEE Transactions on Transportation Electrification. 2023;1-1.
Neves R, Ornaghi H, Alves F, Zattera A, Tom M, Lal H et al. Creep and stress relaxation behavior of functionalized microcrystalline cellulose/epoxy composites. Cellulose. 2023;30(4):2197-2216.
El Bahi A, Rouway M, Tarfaoui M, El Moumen A, Chakhchaoui N, Cherkaoui O et al. Mechanical Homogenization of Transversely Isotropic CNT/GNP Reinforced Biocomposite for Wind Turbine Blades: Numerical and Analytical Study. Journal of Composites Science. 2023;7(1):29.
Nerurkar P. Illegal activity detection on bitcoin transaction using deep learning. Soft Computing. 2023;27(9):5503-5520.
Ziapkoff M, Duigou L, Robin G, Cadou J, Daya E. A high order Newton method to solve vibration problem of composite structures considering fractional derivative Zener model. Mechanics of Advanced Materials and Structures. 2023;1-11.
Patella B, Zanca C, Ganci F, Carbone S, Bonafede F, Aiello G et al. Pd–Co-Based Electrodes for Hydrogen Production by Water Splitting in Acidic Media. Materials. 2023;16(2):474.
Houssein J, Pierre T, Courtois M, Goïc G, Carin M. A novel apparatus dedicated to the estimation of the thermal diffusivity of metals at high temperature. International Journal of Thermal Sciences. 2023;191
Bouayoune A, Guillou R, Bechade J, Rouesne E, Thiaudière D, Grosseau Poussard J et al. Study of the evolution of stresses and associated mechanisms in zirconia growing at high temperature on Zircaloy-4 by use of synchrotron radiation. Corrosion Science. 2023;221:111328.
Taleb K, Saidi-Besbes S, Pillin I, Grohens Y. Gemini surfactant based-organomontmorillonites: preparation, characterization and application in pickering emulsion. Journal of Dispersion Science and Technology. 2023;44(12):2280-2291.
Cheng P, Wang K, Le Duigou A, Liu J, Liu Z, Peng Y et al. A novel dual-nozzle 3D printing method for continuous fiber reinforced composite cellular structures. Composites Communications. 2023;37
Rajaonarivony R, Rouau X, Commandré J, Fabre C, Maigret J, Falourd X et al. Fine comminution of torrefied wheat straw for energy applications: properties of the powder and energy balances of the production route. Sustainable Energy & Fuels. 2023;7(24):5655-5668.
Guellec C, Doudard C, Levieil B, Jian L, Ezanno A, Calloch S. Parametric method for the assessment of fatigue damage for marine shaft lines. Marine Structures. 2023;87:103325.
Jia D, Wang T, Amirat Y, Tang Y. An Inequality Indicator for High-Resistance Connection Fault Diagnosis in Marine Current Turbine. Journal of Marine Science and Engineering. 2023;11(1):97.
Bhowmik K, Khutia N, Tarfaoui M, Basu A, Akhtar S, Dey S et al. Influence of Carbon Nanotube Defects on the Elastic Modulus of Nanocomposite: Multiscale Simulation. Journal of Materials Engineering and Performance. 2023;32:2356–2369.
Navrátil L, Carrere N, Le Saux V, Leclercq S, Marco Y. On the ability of a viscoelastic model to predict the average cyclic energy dissipated by a 3D layer-to-layer composite. Composite Structures. 2023;303:116264.
Faye A, Perali P, Augier B, Sacher M, Leroux J, Nême A et al. Fluid-Structure Interactions response of a composite hydrofoil modelled with 1D beam finite elements. 2023..
Guillaume H, Dieng L, Shabnam Arbab C, Philippe P. Influence of the thermomechanical behavior of NiTi wires embedded in a damper on its damping capacity: Application to a bridge cable. AIMS Materials Science. 2023;10(1):1-25.
Cheng P, Peng Y, Li S, Rao Y, Le Duigou A, Wang K et al. 3D printed continuous fiber reinforced composite lightweight structures: A review and outlook. Composites Part B: Engineering. 2023;250
Kergariou C, Demoly F, Perriman A, Le Duigou A, Scarpa F. The Design of 4D-Printed Hygromorphs: State-of-the-Art and Future Challenges. Advanced Functional Materials. 2023;33(6)
Audren M, Guihéneuf S, Le Borgne T, Rangeard D, Perrot A. Strategy for the Mix Design of Building Earthen Materials Made of Quarry By-Products. Buildings. 2023;13(10):2531.
Glanowski T, Le Saux M, Le Saux V, Huneau B, Champy C, Charrier P et al. Combined techniques and relevant image processing for quantitative statistical characterization of inclusions in elastomers. Rubber Chemistry and Technology. 2023;96(1):59-89.
Mansour M, Lendormi T, Louka N, Maroun R, Hobaika Z, Lanoisellé J. Anaerobic Digestion of Poultry Droppings in Semi-Continuous Mode and Effect of Their Co-Digestion with Physico-Chemical Sludge on Methane Yield. Sustainability. 2023;15(7):5997.
Bercelli L, Doudard C, Calloch S, Le Saux V, Beaudet J. Thermometric investigations for the characterization of fatigue crack initiation and propagation in Wire and Arc Additively Manufactured parts with as‐built surfaces. Fatigue and Fracture of Engineering Materials and Structures. 2023;46(1):153-170.
Tung T, Tran M, Pereira A, Cordeiro C, Nguyen D, Tai N et al. Graphene woven fabric-polydimethylsiloxane piezoresistive films for smart multi-stimuli responses. Colloids and Surfaces B: Biointerfaces. 2023;221:112940.
Azulay R, Combescure C, Dirrenberger J. Instability-induced pattern generation in architectured materials — A review of methods. International Journal of Solids and Structures. 2023;274:112240.
Djourachkovitch T, Blal N, Hamila N, Gravouil A. Data assisted framework for topology design of micro-architected compliant mechanisms. International Journal of Solids and Structures. 2023;265
Rasoul Atashipour S, Challamel N, Arne Girhammar U. On buckling of layered composite heavy columns—Effect of interlayer bonding imperfection. International Journal of Solids and Structures. 2023;260-261:112030.
Issa H, Natale G, Ausias G, Férec J. Modeling and numerical simulations of Brownian rodlike particles with anisotropic translational diffusion. Physical Review Fluids. 2023;8(3):033302.
Qiu Y, Li Q, Ai Y, Chen W, Benbouzid M, Liu S et al. Two-stage distributionally robust optimization-based coordinated scheduling of integrated energy system with electricity-hydrogen hybrid energy storage. Protection and Control of Modern Power Systems. 2023;8:33 (14).
Kwiatkowski V, Le Saux M, Le Saux V, Leclercq S, Marco Y. Fatigue of short carbon fiber reinforced PEEK under compression: Influence of the load ratio and predictions from heat buildup measurements. Fatigue and Fracture of Engineering Materials and Structures. 2023;46(7):2396-2410.
Challamel N, Zhang Y, Wang C, Ruta G, Dell'Isola F. Discrete and continuous models of linear elasticity: history and connections. Continuum Mechanics and Thermodynamics. 2023;35:347-391.
Poncelet M, Combescure C, Amiot F. Detecting bifurcations in 2D periodic metamaterials from images. Materials Letters. 2023;353:135307 (4).
Pernod L, Sacher M, Wackers J, Augier B, Bot P. Free-Surface Effects on Two-Dimensional Hydrofoils by RANS-VOF Simulations. Journal of Sailing Technology. 2023;8(1):24-38.
Cheng P, Peng Y, Wang K, Le Duigou A, Yao S, Chen C. Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites. Composite Structures. 2023;303
Ardant D, Brumaud C, Perrot A, Habert G. Robust clay binder for earth-based concrete. Cement and Concrete Research. 2023;172:107207.
Faye A, Perali P, Nême A, Sacher M, Augier B, Leroux J et al. Equivalent beam finite element to model the mechanical behavior of composite hydrofoils. 2023..
Férec J, Ausias G, Advani S. 100 years later, impact of the Jeffery equation on fiber suspensions. Journal of Non-Newtonian Fluid Mechanics. 2023;318
Fkyerat T, Créac'Hcadec R, Le Poulain F, Guéret C. Heated press welding: analysis of the parameters influencing the mechanical strength of hybrid PA66/PA12 thermoplastic and S235 steel sheet joints. The Journal of Adhesion. 2023;100(10):947–968.
Geißler P, Domurath J, Ausias G, Férec J, Saphiannikova M. Viscosity and dynamics of rigid axisymmetric particles in power-law fluids. Journal of Non-Newtonian Fluid Mechanics. 2023;311
Guna V, Touchaleaume F, Saulnier B, Grohens Y, Reddy N. Sustainable bioproducts through thermoplastic processing of wheat gluten and its blends. Journal of Thermoplastic Composite Materials. 2023;36(4):1775-1806.
Ichihara N, Ueda M, Kajiwara K, Le Duigou A, Castro M. 3D printing with tension and compaction: prevention of fiber waviness in 3D-printed continuous carbon fiber-reinforced thermoplastics. Advanced Composite Materials. 2023..
Carbone S, Caruso A, Patella B, Miceli R, Pellitteri F, Caruso M et al. Nanostructured Ni-Fe-P Alloy for Alkaline Electrolyzer. Chemical Engineering Transactions. 2023;:649-654.
Palazot M, Soccalingame L, Froger C, Jolivet C, Bispo A, Kedzierski M et al. First National References of Microplasticcontamination of French Soils. 2023..
Gupta P, Sathwane M, Chhajed M, Verma C, Grohens Y, Seantier B et al. Surfactant Assisted In Situ Synthesis of Nanofibrillated Cellulose/Polymethylsilsesquioxane Aerogel for Tuning Its Thermal Performance. Macromolecular Rapid Communications. 2023;44(2)
Quereilhac D, Pinsard L, Guillou E, Fazzini M, de Luycker E, Bourmaud A et al. Exploiting synchrotron X-ray tomography for a novel insight into flax-fibre defects ultrastructure. Industrial Crops and Products. 2023;198:116655.
Bouider B, Bouakaz B, Haffad S, Berrayah A, Magueresse A, Grohens Y et al. Composite Nanoarchitectonics of Poly(lactic acid)/Metal Organic Framework with Property Investigations Toward Packaging Applications. Journal of Inorganic and Organometallic Polymers and Materials. 2023;33(12, SI):3689-3702.
Marchandise A, Keryvin V, Grohens Y, Le Borgne R. Influence of the lay-up and curing steps in the manufacturing process of thick laminate composites on their compressive strength. Composites Part A: Applied Science and Manufacturing. 2023;164
Desenclos K, Nême A, Leroux J, Jochum C. A Novel Composite Modeling Method to Analyze the Woven Fabric Structures of Leading-Edge Inflatable Kites. Mechanics of Composite Materials. 2023;58(6):867-882.
Loiseau M, Chataigner S, Créac'Hcadec R, Lepretre E, Quéméré M, Court J. Impact of the load level on the creep behaviour of adhesively bonded fastener in tension: experimental investigations, analytical and numerical modelling. Journal of Adhesion Science and Technology. 2023;37(21):2995-3012.
Louge J, Moyne S, Doudard C, Calloch S, Weber B, Munier R. Self-heating measurements under cyclic loading to identify history effects on HCF properties of high-strength low-alloy steel: Part I—Experimental investigations. Fatigue and Fracture of Engineering Materials and Structures. 2023;46(1):171-181.
da Silva L, Cellard C, Geslain E, Sohier L, Ponte-Felgueiras O, Créac'Hcadec R. Numerical investigation of thermal buckling and post-buckling behavior of an EN AW 6016-T4 car roof assembled in a steel body-in-white. Mechanics & Industry. 2023;24:36.
Durand S, d'Orlando A, Mougnard L, Bourmaud A, Beaugrand J. Combining infrared and Raman spectra to assess MDI localization in novel flax-reinforced automotive composites. Composites Part C: Open Access. 2023;12:100382.
Patella B, Carbone S, Oliveri M, Caruso M, Pellitteri F, Mandin P et al. Nanostructured Ni-Fe-S Based Electrode for Hydrogen Production by Water Electrolysis. Chemical Engineering Transactions. 2023;:37-42.
Claude B, Girault G, Leblé B, Cadou J. On the use of an high order perturbation method for numerical time integration in structural dynamics. Comptes Rendus. Mécanique. 2023;351:227-245.
Kouakou A, Lecompte T, Glé P, Chateau C, Magniont C, Aimedieu P et al. Microstructural analysis of biobased granular packings for consolidated multiphysics modeling. 2023..
Bensaada R, El Malki Alaoui A, Thevenet D, Arrigoni M. Interlaminar strength characterization of Tensylon® UHMWPE under multimodal loads. Procedia Structural Integrity. 2023;47:503-512.
Barbe V, Jacquin J, Wolinski A, Cruaud C, Roche D, Bloch M et al. Identification d'une nouvelle espèce d'Alteromonas capable de dégrader du PHBV en milieu marin. 2023..
Bellec E, Doudard C, Facchinetti M, Calloch S, Moyne S. Loading classification proposal for fatigue design of automotive chassis-parts: A relevant process for variable amplitude and multi-input load cases. International Journal of Fatigue. 2023;166:107284.
Férec J, Ausias G, Advani S. A tensorial form to describe the rheological properties of a rigid triaxial ellipsoid suspended in a Newtonian fluid. Journal of Non-Newtonian Fluid Mechanics. 2023;311
Mansour M, Lendormi T, Drévillon L, Naji A, Louka N, Maroun R et al. Influence of substrate/inoculum ratio, inoculum source and ammonia inhibition on anaerobic digestion of poultry waste. Environmental Technology. 2022;45(10):1894-1907.
Zolfagharian A, Bodaghi M, Le Duigou A. Editorial: 4D printing and 3D printing in robotics, sensors, and actuators manufacturing. Frontiers in Robotics and AI. 2022;9
Sonebi M, Abdalqader A, Amziane S, Dvorkin L, Ghorbel E, Kenai S et al. Trends and opportunities of using local sustainable building materials in the Middle East and North Africa region. RILEM Technical Letters. 2022;7:127-138.
Zhang X, Badihi H, Yu Z, Benbouzid M, Lu N, Zhang Y. Application of Reinforcement Learning to Wind Farm Active Power Control Design. 2022;229-234.
Saint-Sulpice L, Legrand V, Arbab-Chirani S, Calloch S, Doudard C. Fatigue life study of superelastic NiTi Shape Memory Alloys using self-heating under cyclic loading method. International Journal of Fatigue. 2022;165:107208.
Corbel P, Jumel J, Kane K, Mbiakop-Ngassa A. Refined crack propagation methodology and energy balance analysis in the Rubber Cord Adhesion Inflation Test. International Journal of Adhesion and Adhesives. 2022;119:103243.
Palazot M, Soccalingame L, Yvin M, Cirederf Boulant D, Kedzierski M, Bruzaud S. Contamination des sols par les plastiques et les microplastiques. Plastiques et composites. 2022..
Zhao Y, Bourgougnon N, Lanoisellé J, Lendormi T. Biofuel Production from Seaweeds: A Comprehensive Review. Energies. 2022;15(24):9395.
Kedzierski M, Palazot M, Soccalingame L, Pedrotti M, Bruzaud S. Microplastic fouling: A gap in knowledge and a research imperative to improve their study by infrared characterization spectroscopy. Marine Pollution Bulletin. 2022;185:114306.
Klapczynski V, Courtois M, Meillour R, Bertrand E, Maux D, Pierre T et al. Temperature and time dependence of manganese evaporation in liquid steels. Multiphysics modelling and experimental confrontation. Scripta Materialia. 2022;221:114944.
Louge J, Moyne S, Doudard C, Calloch S, Weber B, Munier R. Self‐heating measurements under cyclic loading to identify history effects on HCF properties of high‐strength low‐alloy steel: Part II—Modeling. Fatigue and Fracture of Engineering Materials and Structures. 2022;45(12):3524-3534.
Choudhury S, Vignaud G, Dubreuil P, Assresahegn B, Guay D, Pech D. Conformal atomic layer deposition of RuOx on highly porous current collectors for micro-supercapacitor applications. Nanotechnology. 2022;33(49):495404.
Le Saux M, Le Bail J, Becker J, Caër C, Charrier P, Le Saux V et al. Statistical characterization of the microstructure of microcellular polyurethane foams. 2022;
Inayat U, Zia M, Mahmood S, Berghout T, Benbouzid M. Cybersecurity Enhancement of Smart Grid: Attacks, Methods, and Prospects. Electronics. 2022;11(23):3854.
Rokbani M, Saint-Sulpice L, Bouraoui T. Modeling of Fatigue Behavior of NiTi Alloys. 2022;134-139.
Champion M, Portier E, Vallée-Réhel K, Linossier I, Balnois E, Vignaud G et al. Anti-Biofilm Activity of a Hyaluronan-like Exopolysaccharide from the Marine Vibrio MO245 against Pathogenic Bacteria. Marine drugs. 2022;20(11):728.
Abbache M, Tabbache B, Hachemi Benbouzid M. An Adaptive Control of Electric Vehicle Based on Nine Switches Inverter Fed Two Induction Motors. IETE journal of research. 2022;70(2):2064-2075.
Siniscalco D, Pessoni L, Vignaud G, Tassin J, Bardeau J, Boussonniere A et al. Solid to liquid transition of azopolymer role of the glass temperature transition. 2022..
Férec J, Corre Y, Ausias G, Grohens Y, Pawar A. Filament for producing variable density structural foam by FDM. 2022..
Derippe G, Volant C, Thomas T, M. D, Lemechko P, Bruzaud S. 8th international conference on biobased and biodegradable polymers. 2022..
Saad J, Lendormi T, Le Maréchal C, Pourcher A, Druilhe C, Lanoiselle J. Analyse de l’effet du stockage du lisier porcin sur les agents pathogènes : clostridies et entérocoques. 2022..
Champion M, Faÿ F, Rodrigues S, Balnois E, Vignaud G. Évaluation du caractère antifouling de l’exopolysaccharide MO245. 2022..
Le Loeuff J, Boy V, Morancais P, Bourgougnon N, Lanoiselle J. Désintégration par champs électriques pulsés de la matière algale Sargassum muticum. 2022..
Cheng P, Wang K, Chen X, Le Duigou A, Peng Y, Wen W. Compressive property and shape memory effect of 3D printed continuous ramie fiber reinforced biocomposite corrugated structures. Smart Materials and Structures. 2022;31(12):124003.
Gambade J, Noël H, Glouannec P, Magueresse A. In-situ assessment of a solar vacuum tube collectors installation dedicated to hot water production. Energy Reports. 2022;8:605-615.
Nuez L, Richely E, Perez J, Guessasma S, Beaugrand J, Baley C et al. Exploring the effect of relative humidity on dynamic evolution of flax fibre’s microfibril angle through in situ tensile tests under synchrotron X-ray diffraction. Industrial Crops and Products. 2022;188:115592.
Galisson S, Carron D, Le Masson P, Stamoulis G, Feulvarch E, Surdon G. Modeling Hardness Evolution during the Post-Welding Heat Treatment of a Friction Stir Welded 2050-T34 Alloy. Crystals. 2022;12(11):1543.
Challamel N, Atanacković T, Zhang Y, Wang C. A fractional nonlocal elastic model for lattice wave analysis. Mechanics Research Communications. 2022;126:103999.
de Kergariou C, Kim B, Perriman A, Le Duigou A, Guessasma S, Scarpa F. Design of 3D and 4D printed continuous fibre composites via an evolutionary algorithm and voxel-based Finite Elements: Application to natural fibre hygromorphs. Additive Manufacturing. 2022;59:103144.
Nieto-Fuentes J, Jacques N, Marvi-Mashhadi M, N’souglo K, Rodríguez-Martínez J. Modeling dynamic formability of porous ductile sheets subjected to biaxial stretching. International Journal of Plasticity. 2022;158:103418.
Ahmed H, Biricik S, Komurcugil H, Elghali S, Benbouzid M. Enhanced frequency-adaptive self-tuning filter-based continuous terminal sliding mode control of single-phase dynamic voltage restorer. Control Engineering Practice. 2022;128:105340.
Smadi A, Khoucha F, Benrabah A, Benbouzid M. Interleaved High Gain DC/DC Boost Converter-Based Proton Exchange Membrane Fuel Cell Fault-Tolerant Control. International Review of Electrical Engineering. 2022;17(5):447.
Gibeaux S, Gonzalez C, Pitti J, Gómez D, Nolot F, Flauzac O et al. Tecnologías aplicadas al sector agrícola. 2022..
Shahinzadeh H, Zanjani S, Moradi J, Fayaz-Dastgerdi M, Yaici W, Benbouzid M. The Transition Toward Merging Big Data Analytics, IoT, and Artificial Intelligence with Blockchain in Transactive Energy Markets. 2022;241-246.
Favretto-Cristini N, Deschamps A, Ambrois D, Bonnin M, Beucler É, Diego Mercerat E et al. Seismo-acoustic wave propagation generated by the detonation of UXOs of large charge weights in a shallow water environment. 2022;188000.
Siniscalco D, Pessoni L, Vignaud G, Tassin J, Bardeau J, Boussonniere A et al. Revêtements à photo-transition solide-liquide réversible. 2022..
Carron D, Galisson S, Le Masson P, Stamoulis G, Feulvarch E, Surdon G. Modélisation de la dureté de l’alliage 2050 T34 après revenu post soudage FSW. 2022..
Ouldhamrane H, Charpentier J, Khoucha F, Zaoui A, Achour Y, Benbouzid M. Optimal Design of Axial Flux Permanent Magnet Motors for Ship RIM-Driven Thruster. Machines. 2022;10(10):932.
Martinez-Cano L, Chevalier A, Azar M, Ville J, Benedicto J, Laurent P et al. Ka-band compact multi-materials rectangular waveguide loads. 2022..
Chen H, Xie J, Han J, Shi W, Charpentier J, Benbouzid M. Position Control of Heave Compensation for Offshore Cranes Based on a Particle Swarm Optimized Model Predictive Trajectory Path Controller. Journal of Marine Science and Engineering. 2022;10(10):1427.
Arnoult X, Arnoult-Růžičková M, Maňák J, Viani A, Brajer J, Arrigoni M et al. Corrosion and Electrochemical Properties of Laser-Shock-Peening-Treated Stainless Steel AISI 304L in VVER Primary Water Environment. Metals. 2022;12(10):1702.
Arhant M, Lolive E, Bonnemains T, Davies P. Effect of aging on the fatigue crack growth properties of carbon-polyamide 6 thermoplastic composites using the multi ΔG-control method. Composites Part A: Applied Science and Manufacturing. 2022;161:107105 (10p.).
Beerli T, Grolleau V, Mohr D, Roth C. Axisymmetric V-bending: A single experiment to determine the fracture strain and weakest sheet material direction for plane strain tension. International Journal of Solids and Structures. 2022;252:111813.
Leplat J, Stamoulis G, Bidaud P, Thevenet D. Measurement of the interfacial strain energy release rate of adhesively bonded structures with metallic substrates before and after water ageing. Theoretical and Applied Fracture Mechanics. 2022;121:103511.
Meziane B, El Malki Alaoui A, Nême A, Leblé B, Bellanger D. Experimental investigation of the influence of the panel stiffness on the behaviour of a wedge under slamming. Journal of Fluids and Structures. 2022;114:103702.
Goïc G, Benali A, Nurit M, Cellard C, Sohier L, Mansouri A et al. Reflectance Transformation Imaging for the quantitative characterization of experimental fracture surfaces of bonded assemblies. Engineering Failure Analysis. 2022;140:106582.
Le Bail J, Levieil B, Moyne S, Doudard C, Calloch S. Extension of the Adjustable Localization Operator Method to Anisotropic Elasto-Plastic Behavior for Low-Cycle Fatigue Life Prediction. Journal of Engineering Materials and Technology. 2022;144(4)
Benbouzid M, Muyeen S, Zia M. Special Issue on Microgrids/Nanogrids Implementation, Planning, and Operation. Applied Sciences. 2022;12(19):9916.
Li Y, Challamel N, Elishakoff I. Effective mass and effective stiffness of finite and infinite metamaterial lattices. Archive of Applied Mechanics. 2022;93(1):301-321.
Loiseau M, Chataigner S, Créac'Hcadec R, Lepretre E, Court J, Quéméré M. Modelling of the creep behaviour of adhesive joints using Arcan tests. 2022..
Berghout T, Bentrcia T, Ferrag M, Benbouzid M. A Heterogeneous Federated Transfer Learning Approach with Extreme Aggregation and Speed. Mathematics. 2022;10(19):3528.
Zhang Y, Wang C, Challamel N, Xie Y, Yang J. Optimal design of functionally graded lattice structures using Hencky bar-grid model and topology optimization. Structural and Multidisciplinary Optimization. 2022;65(10):276.
Saini M, Tanne E, Arrigoni M, Zaleski S, Fuster D. On the dynamics of a collapsing bubble in contact with a rigid wall. Materiale Plastice. 2022;948(10):A45.
Duval H, Raymond C, Odier-Guedj D, Chaubet P, Blanchet M, Boelen V et al. Chapitre 2. Remobiliser le corps à l’école : regards croisés. 2022;37-64.
Fruleux T, Castro M, Correa D, Wang K, Matsuzaki R, Le Duigou A. Geometric limitations of 3D printed continuous flax-fiber reinforced biocomposites cellular lattice structures. Composites Part C: Open Access. 2022;9:Article number 100313.
Mandin P, Rabillard L, Thappily P, Struyven F. Water Autoprotolysis at Anode During Alkaline Water Electrolysis. 2022..
Ebrahimnezhad-Khaljiri H, Eslami-Farsani R, Mirzamohammadi S, Chirani S. The Simultaneous Effect of Microcapsules and Silica Nanoparticles on the Mechanical-healing Properties of Glass Fibers-Epoxy Smart Composites. Fibers and Polymers. 2022;23(10):2907-2915.
Chen H, Wang X, Benbouzid M, Charpentier J, Aϊt-Ahmed N, Han J. Improved Fractional-Order PID Controller of a PMSM-Based Wave Compensation System for Offshore Ship Cranes. Journal of Marine Science and Engineering. 2022;10(9):1238.
https://www.mdpi.com/journal/jmse
Richely E, Bourmaud A, Dhakal H, Zhang Z, Beaugrand J, Guessasma S. Exploring the morphology of flax fibres by X-ray microtomography and the related mechanical response by numerical modelling. Composites Part A: Applied Science and Manufacturing. 2022;160:107052.
Challamel N, Nicot F, Wautier A, Darve F, Lerbet J. Hyperelastic or Hypoelastic Granular Circular Chain Instability in a Geometrically Exact Framework. Journal of Engineering Mechanics - ASCE. 2022;148(9):04022053.
Verron-Guillemot L, Hamard E, Cazacliu B, Razakamanantsoa A, Duc M, Vinceslas T et al. Estimating and mapping the availability of earth resource for light earth building using a soil geodatabase in Brittany (France). Resources, Conservation and Recycling. 2022;184:106409.
Civier L, Chevillotte Y, Bles G, Montel F, Davies P, Marco Y. Short and long term creep behaviour of polyamide ropes for mooring applications. Ocean Engineering. 2022;259:111800 (10p.).
Melelli A, Durand S, Alvarado C, Kervoëlen A, Foucat L, Grégoire M et al. Anticipating global warming effects: A comprehensive study of drought impact of both flax plants and fibres. Industrial Crops and Products. 2022;184:115011.
Melelli A, Jamme F, Beaugrand J, Bourmaud A. Evolution of the ultrastructure and polysaccharide composition of flax fibres over time: When history meets science. Carbohydrate Polymers. 2022;291:119584.
Gautreau M, Durand S, Paturel A, Le Gall S, Foucat L, Falourd X et al. Impact of cell wall non-cellulosic and cellulosic polymers on the mechanical properties of flax fibre bundles. Carbohydrate Polymers. 2022;291:119599.
Berghout T, Benbouzid M, Muyeen S. Machine learning for cybersecurity in smart grids: A comprehensive review-based study on methods, solutions, and prospects. International journal of critical infrastructure protection. 2022;38:100547.
Faye A, Carrere N, Sacher M, Frédéric H, Nême A. Determination of the equivalent structural properties of a composite hydrofoil. 2022..
de la Hougue A, Androuin G, Pernod L, Sacher M, Augier B, Bot P et al. Influence of shaft stiffness on the performance of a plane-like hydrofoil. 2022..
Arrigoni M, Forquin P, Le Clanche J, Zavard M, Francois C, Castres M et al. Détermination de l’équation d’état dans la direction hors plan du Tensylon® (UHMWPE). 2022..
Loiseau M, Chataigner S, Créac'Hcadec R, Lepretre E, Court J, Quéméré M. Development of a mechanical frame adapted to Arcan tests to identify the creep behaviour of adhesive joints. 2022..
Agne A, Arrigoni M, Montagu N, Le Clanche J, Long M, Leduc M et al. Experimental characterisations and numerical simulation of fluid-structure interactions for casting control. 2022..
Ben Saada R, El Malki Alaoui A, Darut G, Costil S, Arrigoni M. Caractérisation de l’adhésion d’un assemblage Tensylon/revêtement d’alumine par choc laser. 2022..
Tran M, Kumar A, Sachan A, Castro M, Allegre W, Feller J. Emerging Strategies Based on Sensors for Chronic Wound Monitoring and Management. Chemosensors. 2022;10(8):311.
Struyven F, Guo Z, Fletcher D, Inguanta R, Sellier M, Mandin P. Suitability of the VOF Approach to Model an Electrogenerated Bubble with Marangoni Micro-Convection Flow. Fluids. 2022;7(8):262.
Nitu E, Diakhaté M, Badulescu C, Grédiac M, Blaysat B, Iordache D et al. Analyzing defects and their effects on the strength of a three-layer FSW joint by using X-ray microtomography, localized spectrum analysis, and acoustic emission. Materials Characterization. 2022;190:112069.
Taheri H, Mastali M, Falah M, Abdollahnejad Z, Ghiassi B, Perrot A et al. Microfibrillated cellulose as a new approach to develop lightweight cementitious composites: Rheological, Mechanical, and microstructure perspectives. Construction and Building Materials. 2022;342:128008.
Elhimer M, El Malki Alaoui A, Gabillet C, Jacques N. Measurements of pressure during the forced water entry of a cone into pure and aerated water. Journal of Fluids and Structures. 2022;113:103605.
Bain C, Marco Y, Davies P, Bles G, Reinhart T, Albouy P. An investigation of the appearance of lustering on HMPE fiber ropes. Applied Ocean Research. 2022;125:103244.
Ilangovan M, Navada A, Guna V, Touchaleaume F, Saulnier B, Grohens Y et al. Hybrid biocomposites with high thermal and noise insulation from discarded wool, poultry feathers, and their blends. Construction and Building Materials. 2022;345:128324.
Nuez L, Durand S, Melelli A, Berrin J, Haon M, Drula E et al. Exploring the impact of Verticillium wilt disease on the mechanical properties of elementary flax (Linum usitatissimum L.) fibres. Industrial Crops and Products. 2022;182:114900.
Buscaglia M, Guérard F, Roquefort P, Aubry T, Fauchon M, Toueix Y et al. Mechanically Enhanced Salmo salar Gelatin by Enzymatic Cross-linking: Premise of a Bioinspired Material for Food Packaging, Cosmetics, and Biomedical Applications. Marine Biotechnology. 2022;24(4):801-819.
Ahmed H, Tir Z, Biricik S, Benbouzid M. Fundamental frequency sequence amplitude estimator for power and energy applications. PLoS ONE. 2022;17(8):e0270851.
Bekhouche R, Khoucha F, Benrabah A, Benbouzid M, Benmansour K. Reliable Online Fault Detection and Fault-Tolerant Control of Grid-Connected Modular Multilevel Converters Based on Active Disturbance Rejection and Improved Model Predictive Control. International Journal on Energy Conversion (IRECON). 2022;10(4):105.
Placidi L, Timofeev D, Maksimov V, Barchiesi E, Ciallella A, Misra A et al. Micro-mechano-morphology-informed continuum damage modeling with intrinsic 2nd gradient (pantographic) grain–grain interactions. International Journal of Solids and Structures. 2022;254-255
Rossi M, Lattanzi A, Morichelli L, Martins J, Thuillier S, Andrade-Campos A et al. Testing methodologies for the calibration of advanced plasticity models for sheet metals: A review. Strain. 2022;58(6)
Carin M, Courtois M, Dal M, Mayi Y, Guillemot G, Zhang Y et al. Additive Manufacturing of Metal Alloys 1. 2022;
Peyre P, Bordreuil C, Carin M. Physics of the wire arc additive manufacturing process. 2022..
Renaud P, Sacher M, Scolan Y. Multi-objective hull form optimization of a SWATH configuration using surrogate models. Ocean Engineering. 2022;256:111209.
Le Maux D, Klapczynski V, Courtois M, Pierre T, Le Masson P. Surface tension of liquid Fe, Nb and 304L SS and effect of drop mass in aerodynamic levitation. Journal of Materials Science. 2022;57(25):12094-12106.
Badrou A, Tardif N, Chaudet P, Lescanne N, Szewczyk J, Blanc R et al. Simulation of multi-curve active catheterization for endovascular navigation to complex targets. Journal of Biomechanics. 2022;140:111147.
Li H, Chen H, Gao N, Aϊt-Ahmed N, Charpentier J, Benbouzid M. Ship Dynamic Positioning Control Based on Active Disturbance Rejection Control. Journal of Marine Science and Engineering. 2022;10(7):865.
Simon J, Hamila N, Binetruy C, Comas-Cardona S, Masseteau B. Design and numerical modelling strategy to form Tailored Fibre Placement preforms: Application to the tetrahedral part with orthotropic final configuration. Composites Part A: Applied Science and Manufacturing. 2022;158:106952.
Le Marre M, Mandin P, Lanoisellé J, Zilliox E, Rammal F, Inguanta R. Pumps as turbines regulation study through a decision-support algorithm. Renewable Energy. 2022;194:561-570.
Bhowmik K, Mukhopadhyay T, Tarfaoui M, Khutia N, Roy Chowdhury A, Lafdi K. Damage modeling of MWCNT reinforced Carbon/Epoxy composite using different failure criteria: a comparative study. Applied physics. A, Materials science & processing. 2022;128(7):549.
Berghout T, Benbouzid M, Bentrcia T, Amirat Y, Mouss L. Exposing Deep Representations to a Recurrent Expansion with Multiple Repeats for Fuel Cells Time Series Prognosis. Entropy. 2022;24(7):1009.
Zendagui A, Goïc G, Chatoux H, Thomas J, Jochum P, Maniglier S et al. Reflectance Transformation Imaging as a Tool for Computer-Aided Visual Inspection. Applied Sciences. 2022;12(13):6610.
Lima R, Oswal A, Roux N, Bernasconi A, Carboni M, Carrere N. Enhancement of mode I fracture toughness of adhesively bonded secondary joints using layup patterning of CFRP. 2022;2:796-803.
Lainé C, Lemechko P, Bruzaud S. 3èmes Journées annuelles du GdR Polymères et Océans. 2022..
G Lacerda P, Raji S, Jumel J, Roger P. Bond line durability evaluation in a building integrated solar thermal system. 2022;2:777-779.
Bernolin C, Stamoulis G, Bidaud P, Albouy W, Dagorn N, Thevenet D. Cyclic behavior and crack propagation in adhesively-bonded assemblies under mixed mode and negative load ratios. 2022;2:660-661.
Lainé C, Lemechko P, Bruzaud S. European polymer congress 2022. 2022..
Navrátil L, Marco Y, Le Saux V, Leclercq S, Carrere N. Thermomechanical characterization of 3D interlock carbon composites. 2022;3:382-384.
Abdalqader A, Sonebi M, Dedenis M, Amziane S, Perrot A. Mechanical Performance of 3-D Printed Concrete Containing Fly Ash, Metakaolin and Nanoclay. 2022;37:111-116.
Jabeur R, Loyer P, Duval H, Sire O, Mansour H, Le Tilly V. ER alpha nouvelle cible protéique de CDK5 ? 2022..
Amara S, Toumi S, Ben Salah C, Saidi A. Optimization sizing of an autonomous photovoltaic-battery microgrid system. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 2022;237(4):638-652.
Mandin P, Rabillard L, Thappily P, Struyven F. Présentation des activités Hydrogène UBS, Journée Hydrogène Bretagne. 2022..
Derippe G, Volant C, Thomas T, Deroiné M, Lemechko P, Bruzaud S. Conférence Vieillissement des polymères. 2022..
Dabachi M, Rouway M, Rahmouni A, Bouksour O, Sbai S, Laaouidi H et al. Numerical Investigation of the Structural Behavior of an Innovative Offshore Floating Darrieus-Type Wind Turbines with Three-Stage Rotors. Journal of Composites Science. 2022;6(6):167.
Wakkaf T, El Zrelli R, Yacoubi L, Kedzierski M, Lin Y, Mansour L et al. Seasonal patterns of microplastics in surface sediments of a Mediterranean lagoon heavily impacted by human activities (Bizerte lagoon, Northern Tunisia). Environmental Science and Pollution Research. 2022;29(51):76919-76936.
Kumar M, N’souglo K, Hosseini N, Jacques N, Rodríguez-Martínez J. Theoretical predictions of dynamic necking formability of ductile metallic sheets with evolving plastic anisotropy and tension-compression asymmetry. International Journal of Material Forming. 2022;15:21.
Colon X, Adlafi M, Galpin B, Mahéo L, Grolleau V. Design of a simple shear test for large strains with sequential re-machining of the specimen edges. 2022;1238(1):012086.
Royne S, Laurent H, Maillard A. U-channel forming of an 7075-T6 in warm conditions. 2022;1238
Demazel N, Boyer A, Laurent H, Oliveira M. Hot tensile and expansion tests of Ductibor®1000 steel. 2022;1238(1):012054.
Andrade-Campos A, Bastos N, Conde M, Gonçalves M, Henriques J, Lourenço R et al. On the inverse identification methods for forming plasticity models using full-field measurements. 2022;1238(1):012059.
https://iopscience.iop.org/
Palazot M, Kedzierski M, Soccalingame L, Bruzaud S. Chemical composition of microplastics floating on the Mediterranean Sea surface. 2022..
Volant C, Balnois E, Vignaud G, Magueresse A, Bruzaud S. Design of polyhydroxyalkanoate (PHA) microbeads with tunable functional properties and high biodegradability in seawater. Journal of Polymers and the Environment. 2022;1-16.
Soccalingame L, Palazot M, Kedzierski M, Bruzaud S. Vieillissement en conditions marines et climatiques du polyoxyméthylène. 2022..
Palazot M, Notheaux M, Soccalingame L, ter Halle A, Ludwig W, Bruzaud S et al. Méthodes d’extraction et de caractérisation des microplastiques prélevés lors de la mission Tara Microplastiques 2019. 2022..
Guéguinou M, Ibrahim S, Bourgeais J, Robert A, Pathak T, Zhang X et al. Curcumin and NCLX inhibitors share anti-tumoral mechanisms in microsatellite-instability-driven colorectal cancer. Cellular and Molecular Life Sciences. 2022;79(6):article n° 284.
Kedzierski M, Palazot M, Soccalingame L, Falcou-Préfol M, Gorsky G, Galgani F et al. Composition chimique des microplastiques flottant à la surface de la mer Méditerranée. 2022..
Ouldhamrane H, Charpentier J, Khoucha F, Zaoui A, Achour Y, Benbouzid M. Development and experimental validation of a fast and accurate field calculation tool for axial flux permanent magnet machines. Journal of Magnetism and Magnetic Materials. 2022;552:169105.
Márquez Costa J, Jumel J, Badulescu C, Stamoulis G. Self-similar crack propagation along a viscoelastic interface in a double-cantilever beam test. Mechanics of Time-Dependent Materials. 2022..
Wakkaf T, El Zrelli R, Kedzierski M, Palazot M, Bruzaud S, Rabaoui L. Evaluation de la pollution par les microplastiques dans les eaux de surface de la lagune anthropisée de Bizerte. 2022..
Dumont V, Stamoulis G, Badulescu C, Lefèvre A, Thévenet D. Investigation of the influence of the temperature on the fracture properties of adhesive joints using the Arcan device. Engineering Fracture Mechanics. 2022;269:108524.
Yvin M, Cirederf Boulant D, Palazot M, Kedzierski M, Deportes I, Bruzaud S. Premières évaluations du stock de microplastiques dans les sols agricoles français. 2022..
Chebbi M, Beltifa A, Alibi S, Di Bella G, Loturco V, Sire O et al. Estrogenic hazards of short chain phthalates and bisphenols found in cosmetic products. International Journal of Environmental Health Research. 2022;32(2):252-263.
Bekhouche R, Khoucha F, Benrabah A, Benbouzid M, Benmansour K. An Improved Active Disturbance Rejection Model Predictive Power Control with Circulating Current Reduction for Grid-Connected Modular Multilevel Converter. Electric Power Components and Systems. 2022;49(15):1212-1226.
Benali A, Cellard C, Sohier L, Moretti A, Créac'Hcadec R. Dimensionnement d'un berceau moteur multi-matériaux collé. 2022..
Nafkha-Tayari W, Ben Elghali S, Heydarian-Forushani E, Benbouzid M. Virtual Power Plants Optimization Issue: A Comprehensive Review on Methods, Solutions, and Prospects. Energies. 2022;15(10):3607.
Clough A, Brateau M, Delagrange I, Pichot P. Interior ballistics modelling for 40 mm cased telescoped ammunition. 2022;1:703-716.
Coelho B, Thuillier S. On the use of the Gleeble® test as a heterogeneous test: sensitivity analysis on temperature, strain and strain rate. IOP Conference Series: Materials Science and Engineering. 2022;1238
Zia M, Nasir M, Elbouchikhi E, Benbouzid M, Vasquez J, Guerrero J. Energy management system for a hybrid PV-Wind-Tidal-Battery-based islanded DC microgrid: Modeling and experimental validation. Renewable and Sustainable Energy Reviews. 2022;159:112093.
Doitrand A, Molnár G, Leguillon D, Martin E, Carrere N. Dynamic crack initiation assessment with the coupled criterion. European Journal of Mechanics - A/Solids. 2022;93:104483.
https://www.sciencedirect.com/science/article/pii/S0997753821002291?via%3Dihub
Fruleux T, Castro M, Sauleau P, Matsuzaki R, Le Duigou A. Matrix stiffness: A key parameter to control hydro-elasticity and morphing of 3D printed biocomposite. Composites Part A: Applied Science and Manufacturing. 2022;156:106882.
Kacem A, Laurent H, Thuillier S. Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures. International Journal of Mechanical Sciences. 2022;222:107201.
Tucci F, Andrade-Campos A, Thuillier S, Carlone P. Calibration of the Elasto-Plastic Properties of Friction Stir Welded Blanks in Aluminum Alloy AA6082. 2022;926:2183-2192.
Demazel N, Kacem A, Thuillier S, Laurent H, Briend P, Masse J. Performance Evaluation of Lubricants with Swift Cup Drawing. 2022;926:1195-1203.
Oliveira M, Lattanzi A, Thuillier S, Andrade-Campos A, Rossi M. Error Estimation of the 3D Reconstruction of a Displacement Field from DIC Measurements. 2022;926:2129-2136.
Mayer-Laigle C, Bourmaud A, Chen Y, Whitton R, Barbier M, Beaugrand J et al. Biobased composites materials from waxes and lignocellulosic powders for additive manufacturing. 2022..
Heidarian P, Neyshabouri S, Khoshkonesh A, Bahmanpouri F, Nsom B, Eidi A. Numerical study of flow characteristics and energy dissipation over the slotted roller bucket system. Modeling Earth Systems and Environment. 2022;8(4):5337-5351.
Bellec E, Doudard C, Facchinetti M, Calloch S, Moyne S. Loading Classification for Fatigue Design Applied to Automotive Time-Series. 2022..
Alil L, Arrigoni M, Barbu C, Bles G, Deleanu L, Mostovykh P et al. Mechanical Properties of Ultra-high Molecular Weight Polyethylene (tensylon) from Tensile Tests. Materiale Plastice. 2022;59(1):51-69.
Argouarc'H Y, Créac'Hcadec R. Registration method for the analysis of mooring chain links degraded by corrosion and wear. Ocean Engineering. 2022;250:110877.
Zhao Z, Wang T, Benbouzid M. A fault-tolerant reconfiguration system based on pilot switch for grid-connected inverters. Microelectronics Reliability. 2022;131:114511.
Launay A, Keryvin V, Grandidier J, Mechin P, Balze R. Design of a set-up for measuring the residual compressive strength after high load and high cycle compression fatigue on CFRP. Composite Structures. 2022;286:115294.
Ait Mohammed M, Tarfaoui M. A Progressive Damage Modelling of Glass/Epoxy Cylindrical Structure Subjected to Low-Velocity Impact. Engineering Failure Analysis. 2022;134:106036.
Khammassi S, Tarfaoui M, Škrlová K, Měřínská D, Plachá D, Erchiqui F. Poly(Lactic Acid) (PLA)-Based Nanocomposites: Impact of Vermiculite, Silver, and Graphene Oxide on Thermal Stability, Isothermal Crystallization, and Local Mechanical Behavior. Journal of Composites Science. 2022;6(4):112.
Berghout T, Benbouzid M. A Systematic Guide for Predicting Remaining Useful Life with Machine Learning. Electronics. 2022;11(7):1125.
Placidi L, Barchiesi E, Dell'Isola F, Maksimov V, Misra A, Rezaei N et al. On a hemi-variational formulation for a 2D elasto-plastic-damage strain gradient solid with granular microstructure. Mathematics in Engineering. 2022;5:1-24.
Navrátil L, Le Saux V, Marco Y, Aboura Z, Harizi W, Cuniberti C et al. Understanding the damage mechanisms in 3D layer-to-layer woven composites from thermal and acoustic measurements. Journal of Composite Materials. 2022;002199832210773.
Elishakoff I, Li Y, Challamel N, Reddy J. Simplified Timoshenko–Ehrenfest beam equation to analyze metamaterials. Journal of Applied Physics. 2022;131(10):2043-2066.
Abdelkefi A, Guines D, Leotoing L, Thuillier S. Relevant material characterization for load prediction in incremental forming. International Journal of Material Forming. 2022;15(3):23.
Gouédard C, Pino L, Arbab-Chirani R, Arbab-Chirani S, Chevalier V. Comparison of the cyclic fatigue resistance of One Curve, F6 Skytaper, Protaper Next, and Hyflex CM endodontic files. Restorative Dentistry & Endodontics. 2022;47(2):e16.
Badrou A, Tardif N, Even A, Chaudet P, Lescanne N, Szewczyk J et al. Characterization of Surgical Tools for Specific Endovascular Navigation. Cardiovascular Engineering and Technology. 2022..
Warneboldt I, Marco Y, Charrier P, Hervouet W, Champy C, Raoult I et al. Experimental investigations about complex non-relaxing fatigue loads for carbon-black filled natural rubber. International Journal of Fatigue. 2022;156:106696.
Ganci F, Buccheri B, Patella B, Cannata E, Aiello G, Mandin P et al. Electrodeposited nickel–zinc alloy nanostructured electrodes for alkaline electrolyzer. International Journal of Hydrogen Energy. 2022;47(21):11302-11315.
Klapczynski V, Le Maux D, Courtois M, Bertrand E, Paillard P. Surface tension measurements of liquid pure iron and 304L stainless steel under different gas mixtures. Journal of Molecular Liquids. 2022;350:118558.
Grabow M, Keryvin V, Marchandise A, Grandidier J, Baley C, Guennec C et al. Influence of the manufacturing process on the interlaminar tensile strength of thick unidirectional continuous epoxy/carbon fibre composites. Composites Part A: Applied Science and Manufacturing. 2022;154:106754.
Shayanfard P, Alarcon E, Barati M, Mahtabi M, Kadkhodaei M, Arbab Chirani S et al. Stress raisers and fracture in shape memory alloys: review and ongoing challenges. Critical Reviews in Solid State and Materials Sciences. 2022;47(4):461-519.
Liu X, Chamaa M, Lanoiselle J, Payeux E, Lendormi T. Méthanisation et champs électriques pulsés : quels intérêts pour l’hygiénisation et la production de biogaz ? IAA La revue des industries agroalimentaires. 2022..
https://www.revue-iaa.fr/
Sellali M, Ravey A, Betka A, Kouzou A, Benbouzid M, Djerdir A et al. Multi-Objective Optimization-Based Health-Conscious Predictive Energy Management Strategy for Fuel Cell Hybrid Electric Vehicles. Energies. 2022;15(1318)
Wang J, Wang P, Hamila N, Boisse P. Meso-Macro Simulations of the Forming of 3D Non-Crimp Woven Fabrics. Textiles. 2022;2(1):112-123.
Han J, Zhao P, Yao G, Chen H, Wang Y, Benbouzid M et al. Model predictive current control of asymmetrical hybrid cascaded multilevel inverter. IEEE Open Journal of Power Electronics. 2022;22(4):580-592.
Lendormi T, Jaziri K, Béline F, Leroux S, Bureau C, Midoux C et al. Methane production and microbial community acclimation of five manure inocula during psychrophilic anaerobic digestion of swine manure. Journal of Cleaner Production. 2022;340:11 p..
Massoumi S, Challamel N, Lerbet J. Bending/shear wave dispersion analysis of granular chains – Discrete and enriched continuous Cosserat modelling. International Journal of Solids and Structures. 2022;236-237:111355.
Boodi A, Beddiar K, Amirat Y, Benbouzid M. Building Thermal-Network Models: A Comparative Analysis, Recommendations, and Perspectives. Energies. 2022;15(4):1328.
Guihéneuf S, Perrot A, Rangeard D. Linseed Oil and Xanthan Gum: Promising Stabilisers for Earthen Building Materials. Construction Technologies and Architecture. 2022;245-254.
Grolleau V, Roth C, Mohr D. Design of in-plane torsion experiment to characterize anisotropic plasticity and fracture under simple shear. International Journal of Solids and Structures. 2022;236-237:111341.
Pierre T, Krapez J, Orlande H, Rodiet C, Maux D, Courtois M et al. Simultaneous estimation of temperature and emissivity of metals around their melting points by deterministic and Bayesian techniques. International Journal of Heat and Mass Transfer. 2022;183, Part A:122077.
Mahé F, Binetruy C, Advani S, Ferec J, Eck B. A multi-scale statistical description of stacks of non-cohesive thin particles. Powder Technology. 2022;399:116988.
Zizoui M, Zia M, Tabbache B, Amirat Y, Mamoune A, Benbouzid M. Photovoltaic-Battery-Ultracapacitor-Diesel Hybrid Generation System for Mobile Hospital Energy Supply. Electronics. 2022;11(3):390.
Guihéneuf S, Perrot A, Rangeard D, Cocheteux M. Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples. Construction Technologies and Architecture. 2022;255-262.
Boughezala Mohammed S, Srairi K, Labiod C, Chemsa A, Benbouzid M. A Novel Control Technique Based on Multi-Objective Intelligent Routing Algorithms for Optimum Performances of 12/8 Switched Reluctance Motor. International Journal on Energy Conversion (IRECON). 2022;10(1)
Gouédard C, Pino L, Petit S, Bourbouze G, Saint-Sulpice L, Arbab-Chirani R et al. Elements for Understanding the Bending and Cyclic Fatigue Behavior of Endodontic Instruments. Journal of Materials Engineering and Performance. 2022;31(5):3943-3952.
Noui S, Tabbache B, Berkouk E, Benbouzid M. A Pulse-Width Modulation Control Approach for the High-Voltage Gain Operation of a Z-Source Neutral-Point Clamped Inverters. IETE journal of research. 2022;69(10):7374-7393.
Wangler T, Flatt R, Roussel N, Perrot A, Sonebi M, Wolfs R et al. Printable Cement-Based Materials: Fresh Properties Measurements and Control. 2022;36:99-136.
Mechtcherine V, Fataei S, Bos F, Buswell R, Silva W, Keita E et al. Digital Fabrication with Cement-Based Materials: Underlying Physics. 2022;36:49-98.
Buswell R, Bos F, Silva W, Hack N, Kloft H, Lowke D et al. Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies. 2022;36:11-48.
Barchiesi E, Hamila N. Maximum mechano-damage power release-based phase-field modeling of mass diffusion in damaging deformable solids. Zeitschrift für Angewandte Mathematik und Physik = Journal of Applied mathematics and physics = Journal de mathématiques et de physique appliquées. 2022;73(1):35.
Hamam Z, Godin N, Reynaud P, Fusco C, Carrere N, Doitrand A. Transverse Cracking Induced Acoustic Emission in Carbon Fiber-Epoxy Matrix Composite Laminates. Materials. 2022..
Audren M, Guihéneuf S, Rangeard D, Perrot A. Erosion Behaviour of Bio-Stabilised Earthen Materials. Construction Technologies and Architecture. 2022;234-244.
Bigot N, Boutaous M, Xin S, Hamila N. A Crystallization Kinetic Model for Long Fiber-Based Composite with Thermoplastic Semicrystalline Polymer Matrix. Key Engineering Materials. 2022;926 KEM:1240 – 1247.
Cirederf Boulant D, Bruzaud S, Deportes I, Kedzierski M. Microplastic pollution of organic waste products used for soil amendment. 2022..
Lemartinel A, Castro M, Fouche O, de Luca J, Feller J. Impact and strain monitoring in glass fiber reinforced epoxy laminates with embedded quantum resistive sensors (QRSs). Composites Science and Technology. 2022;221
Pantaloni D, Melelli A, Beaugrand J, Shah D, Baley C, Bourmaud A. Influence of water ageing on the mechanical properties of flax/PLA non-woven composites (vol 200, 109957, 2022). Polymer Degradation and Stability. 2022;201
Chaudey M, Shanwan A, Hivet G, Gillibert J, Hamila N. Experimental and Numerical Study of Polyamide 6.6 Monofilaments for Needle-Punching Modeling. Applied Composite Materials. 2022..
Lerbet J, Challamel N, Nicot F, Darve F. Divergence instability of kinematically constrained Hencky chains: Analytic results and asymptotic behavior. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2022;102(1)
Massoumi S, Challamel N, Lerbet J, Wautier A, Nicot F, Darve F. Static bending of granular beam: exact discrete and nonlocal solutions. Meccanica. 2022;57(8):2043-2066.
Pantaloni D, Ollier L, Shah D, Baley C, Rondet E, Bourmaud A. Can we predict the microstructure of a non-woven flax/PLA composite through assessment of anisotropy in tensile properties? Composites Science and Technology. 2022;218
Cheng J, Eyheraguibel B, Jacquin J, Pujo-Pay M, Conan P, Barbe V et al. Biodegradability under marine conditions of bio-based and petroleum-based polymers as substitutes of conventional microparticles. Polymer Degradation and Stability. 2022;206:110159.
Pinsard L, Guillou E, de Luycker E, Fazzini M, Perrin J, Weitkamp T et al. Elucidating the formation of structural defects in flax fibres through synchrotron X-ray phase-contrast microtomography. Industrial Crops and Products. 2022;184
Ketata N, Seantier B, Guermazi N, Grohens Y. Processing and properties of flax fibers reinforced PLA/PBS biocomposites. Materials Today: Proceedings. 2022;53(2, SI):228-236.
Couture A, Francois V, Cuilliere J, Pilvin P. Automatic generation of statistical volume elements using multibody dynamics and an erosion-based homogenization method. Computational Mechanics. 2022;69(4):1041-1066.
Geslain E, Rogeon P, Cretteur L, Merdji Y. Effect of heat treatment on weldability of Al-Si coated hot-stamped Usibor® 1500P. Surface and Coatings Technology. 2022;445
Gueraiche L, Tarfaoui M, Osmani H. Effects of Hot-Water Aging on the Compression Properties of E-Glass/Epoxy Composites at Varying Strain Rates. Mechanics of Composite Materials. 2022..
Favretto-Cristini N, Garlan T, Morio O, Demoulin X, Arrigoni M, Deschamps A et al. Assessment of Risks Induced by Countermining Unexploded Large-Charge Historical Ordnance in a Shallow Water Environment—Part I: Real Case Study. IEEE Journal of Oceanic Engineering. 2022;47(2):350-373.
Navrátil L, Le Saux V, Leclercq S, Carrere N, Marco Y. Infrared Image Processing to Guide the Identification of Damage and Dissipative Mechanisms in 3D Layer-to-Layer Woven Composites. Applied Composite Materials. 2022..
Zachariah S, Antony T, Grohens Y, Thomas S. From waste to wealth: A critical review on advanced materials for EMI shielding. Journal of Applied Polymer Science. 2022;139(40)
Carin M, Courtois M, Dal M, Mayi Y, Guillemot G, Zhang Y et al. Numerical simulation of additive manufacturing processes. 2022;Chapter 4
Loiseau M, Chataigner S, Créac’hcadec R, Court J, Quéméré M. Inverse identification method of adhesive creep properties from real scale investigations on bonded fastener. The Journal of Adhesion. 2022;98(6):704-720.
Derippe G, Philip L, Odobel C, Jacquin J, Lemechko P, Leistenschneider D et al. Biodégradabilité en milieu marin de différents plastiques biosourcés produits « à façon ». 2022..
Kedzierski M, Palazot M, Soccalingame L, Falcou-Préfol M, Gorsky G, Galgani F et al. Chemical composition of microplastics floating on the surface of the Mediterranean Sea. Marine Pollution Bulletin. 2022;174:113284.
Derippe G, Philip L, Lemechko P, Pujo-Pay M, Calves I, Meisterzheim A et al. Impact des propriétés des PHA sur leur biodégradation en milieu marin. 2022..
Nurit M, Le Goïc G, Maniglier S, Jochum P, Mansouri A. Reflectance Transformation Imaging Visual Saliency: Local and Global Approaches for Visual Inspection of Engineered Surfaces. Applied Sciences. 2022;12(21):10778.
Kherrouba N, Carron D, Kouba R, Bouabdallah M, Badji R. Gleeble-Assisted Investigation and Thermokinetics Simulation of α Phase Isothermal Precipitation during Short-Time Duplex Heat Treatment of Ti-6Al-4V Alloy. Journal of Materials Engineering and Performance. 2022;31(9):7517-7526.
Kaushik S, Sonebi M, Amato G, Perrot A, Das U. Influence of nanoclay on the fresh and rheological behaviour of 3D printing mortar. Materials Today: Proceedings. 2022;58(4, SI):1063-1068.
Maou S, Meftah Y, Tayefi M, Meghezzi A, Grohens Y. Preparation and performance of an immiscible PVC-HDPE blend compatibilized with maleic anhydride (MAH) via in-situ reactive extrusion. Journal of Polymer Research. 2022;29(5)
Kaushik S, Sonebi M, Amato G, Perrot A, Das U. Effect of Mix Proportions on Fresh and Rheological Properties of Cementitious Mixture Containing Natural Fibre: Modelling Using Factorial Design. Construction Technologies and Architecture. 2022;309-315.
Croteau J, Robin G, Cantergiani E, Atieh S, Jacques N, Mazars G et al. Characterization of the Formability of High-Purity Polycrystalline Niobium Sheets for Superconducting Radiofrequency Applications. Journal of Engineering Materials and Technology. 2022;144(2):021004.
Tamayo-Vegas S, Muhsan A, Tarfaoui M, Lafdi K, Chang L. Effect of CNT additives on the electrical properties of derived nanocomposites (experimentally and numerical investigation). Materials Today: Proceedings. 2022;52:199-205.
Tanne E, Bourdin B, Yoshioka K. On the loss of symmetry in toughness dominated hydraulic fractures. International Journal of Fracture. 2022..
Bain C, Davies P, Riou L, Marco Y, Blès G, Damblans G. Experimental evaluation of the main parameters influencing friction between polyamide fibers and influence of friction on the abrasion resistance. Journal of the Textile Institute. 2022;1-9.
Popineau V, Celino A, Peron M, Baley C, Le Duigou A. Understanding the effect of hygroscopic cycling on the internal stress and stiffness of natural fibre biocomposites. Composites Part A: Applied Science and Manufacturing. 2022;158
Yvin M, Kedzierski M, Le Lan M, Bruzaud S. End of life of biodegradable mulches in soils (BIOMALEG project). 2022..
Tancogne-Dejean T, Grolleau V, Mohr D. Strain rate dependent plasticity of lithium-ion pouch cells: Experiments and simulations. International Journal of Impact Engineering. 2022;159:104048.
Traon F, Grohens Y, Corre Y. Entanglement density, macromolecular orientation, and their effect on elastic strain recovery of polyolefin films. Journal of Plastic Film and Sheeting. 2022;38(2):306-336.
Nicolas R, Richard B, Nicolas D, Irina I, Temitope K, Dirk L et al. Assessing the fresh properties of printable cement-based materials: High potential tests for quality control. Cement and Concrete Research. 2022;158
Zachariah S, Grohens Y, Kalarikkal N, Thomas S. Hybrid materials for electromagnetic shielding: A review. Polymer Composites. 2022;43(5):2507-2544.
Courtois E, Rogeon P, Keryvin V, Berckmans W, Roure S, Durand C. Effect of temperature on electrical and thermal conductivities of powder compacts: Ag-C and Ag-WC. Journal of Materials Science. 2022;57(40):18839-18852.
Courtois E, Glouannec P, Magueresse A, Loulou T. Estimating thermal properties of phase change material from heat flux measurements. International Journal of Thermal Sciences. 2022;172
Ghazvini M, Hafez M, Mandin P, Kim M. Experimental Study of Pool Boiling Heat Transfer on Novel Fin Surfaces. SSRN : Social Science Research Network. 2022..
Pedrotti M, Lombard F, Baudena A, Galgani F, Elineau A, Petit S et al. An integrative assessment of the plastic debris load in the Mediterranean Sea. Science of the Total Environment. 2022;838, Part 1:155958.
Pierre T, Geslain E, Courtois M, Magueresse A, Colinart T. In-plane thermal diffusivity estimation by radial fin method. Infrared Physics and Technology. 2022;120:103998.
Ketata N, Seantier B, Guermazi N, Grohens Y. On the development of a green composites based on poly (lactic acid)/ poly (butylene succinate) blend matrix reinforced by long flax fibers. Materials Today: Proceedings. 2022;52(1, SI):95-103.
Yvin M, Kedzierski M, Le Lan M, Bruzaud S. Fin de vie des paillages biodégradables dans le sol. 2022..
Kergariou C, Saidani-Scott H, Perriman A, Scarpa F, Le Duigou A. The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly(lactic acid) composites. Composites Part A: Applied Science and Manufacturing. 2022;155
Li Q, Sun R, Le Duigou A, Guo J, Rossiter J, Liu L et al. Programmable and reconfigurable hygro-thermo morphing materials with multifunctional shape transformation. Applied Materials Today. 2022;27
Bhowmik K, Khutia N, Tarfaoui M, Jana M, Das K, Roy T et al. Influence of multiwalled carbon nanotube on progressive damage of epoxy/carbon fiber reinforced structural composite. Polymer Composites. 2022..
Morvan A, Sacher M, Nême A, Leroux J, Jochum C, Abiven N. Efficient jib-mainsail fluid-structure interaction modelling – Validations with semi-rigid sails experiments. Ocean Engineering. 2022;243:110210.
El Garouge S, Tarfaoui M, Hassoon O, El Minor H, Bendarma A. Effect of impact velocity on the mechanical behavior of a composite plate under slamming impact. Materials Today: Proceedings. 2022;58:1319-1323.
Férec J, Bertevas E, Ausias G, Phan-Thien N. Macroscopic modeling of the evolution of fiber orientation during flow. 2022;77-121.
Vincent K, Bourmaud A, Bernard C, Caër C, Le Saux V, Pouvreau C. A look back at the "Indentation 2021" symposium. Matériaux et Techniques. 2022;110(2)
Pantaloni D, Melelli A, Shah D, Baley C, Bourmaud A. Influence of water ageing on the mechanical properties of flax/PLA non-woven composites. Polymer Degradation and Stability. 2022;200
Nguyen D, Le Saux M, Gélébart L, Brachet J, Bonthonneau J, Courcelle A et al. Mechanical behavior of a chromium coating on a zirconium alloy substrate at room temperature. Journal of Nuclear Materials. 2022;558:153332.
Lagdani O, Tarfaoui M, Rouway M, Laaoui H, Jamoudi Sbai S, Dabachi M et al. Influence of Moisture Diffusion on the Dynamic Compressive Behavior of Glass/Polyester Composite Joints for Marine Engineering Applications. Journal of Composites Science. 2022;6(3):94.
Shojaei Barjuei E, Courteille E, Rangeard D, Marie F, Perrot A. Real-time vision-based control of industrial manipulators for layer-width setting in concrete 3D printing applications. Advances in Industrial and Manufacturing Engineering. 2022;5:100094.
Blaise A, Bles G, Dib W, Shash M, Tourabi A. Modelling of cyclic visco-elasto-plastic one dimensional behaviour of polyamide-based woven strap. Textile Research Journal. 2022..
Tolba Z, Derdour M, Ferrag M, Muyeen S, Benbouzid M. Automated Deep Learning BLACK-BOX Attack for Multimedia P-BOX Security Assessment. IEEE Access. 2022;10:94019-94039.
Kedzierski M, Palazot M, Soccalingame L, Falcou-Préfol M, Gorsky G, Galgani F et al. Chemical composition of microplastics floating on the Mediterranean Sea surface. 2022;:484-493.
Praveen K, Taleb K, Pillin I, Kervoelen A, Grohens Y, Thomas S et al. Comparative mechanical, morphological, rheological, and thermal properties of polypropylene/ethylene-propylene-diene rubber blends. Polymers for Advanced Technologies. 2022;33(10):3296-3311.
Amadji M, Benyahia H. The influence of bearing material on the wear produced, application on the prodisc-C cervical prothesis. UPB Scientific Bulletin, Series D: Mechanical Engineering. 2022;84(4):151-164.
Hassoon O, Abed M, Oleiwi J, Tarfaoui M. Experimental and numerical investigation of drop weight impact of aramid and UHMWPE reinforced epoxy. Journal of the Mechanical Behavior of Materials. 2022;31(1):71-82.
Tom M, Thomas S, Seantier B, Grohens Y, Mohamed P, Haponiuk J et al. APPROACHING SUSTAINABILITY: NANOCELLULOSE REINFORCED ELASTOMERS-A REVIEW. Rubber Chemistry and Technology. 2022;95(4):515-549.
Bigot N, Boutaous M, Xin S, Hamila N. Modeling heat transfer and transcrystallization kinetics during processing of polymer-based composites materials. Polymers for Advanced Technologies. 2022;34(2):655-675.
Arhant M, Lolive E, Bonnemains T, Davies P. A study of pure hydrolysis of carbon fibre reinforced polyamide 6 composites tested under mode I loading. Composites Part A: Applied Science and Manufacturing. 2022;152(Part A):106719 (10p.).
Pawar A, Ausias G, Corre Y, Grohens Y, Férec J. Mastering the density of 3D printed thermoplastic elastomer foam structures with controlled temperature. Additive Manufacturing. 2022;58
Soccalingame L, Palazot M, Kedzierski M, Bruzaud S. Vieillissement en conditions marines et climatiques du polyoxyméthylène. 2022..
Guéguinou M, Ibrahim S, Bourgeais J, Robert A, Pathak T, Zhang X et al. Curcumin and NCLX Inhibitors Share Anti-Tumoral Mechanisms in Microsatellite-Instability-Driven Colorectal Cancer. 2022..
Beaugrand J, Goudenhooft C, Alvarado C, Devaux M, Rivard C, Durand S et al. Evolution of the flax cell wall composition during development and after gravitropism by synchrotron fluorescence imaging. Industrial Crops and Products. 2022;175:114256.
Richely E, Nuez L, Pérez J, Rivard C, Baley C, Bourmaud A et al. Influence of defects on the tensile behaviour of flax fibres: Cellulose microfibrils evolution by synchrotron X-ray diffraction and finite element modelling. Composites Part C: Open Access. 2022;9:100300.
Ventura A, Ouellet-Plamondon C, Rock M, Hecht T, Roy V, Higuera P et al. Environmental Potential of Earth-Based Building Materials: Key Facts and Issues from a Life Cycle Assessment Perspective. 2022;pp. 261-296.
Goda I, Nachtane M, Qureshi Y, Benyahia H, Tarfaoui M. COVID-19: Current challenges regarding medical healthcare supplies and their implications on the global additive manufacturing industry. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 2022;095441192110703.
Berrabah I, Dehouche N, Kaci M, Bruzaud S, Deguines C, Delaite C. Effect of ZnO Nanoparticles on Tensile and Viscoelastic Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Bionanocomposites. Macromolecular Symposia. 2022;405(1, SI)
Li Q, Le Duigou A, Guo J, Thakur V, Rossiter J, Liu L et al. Biobased and Programmable Electroadhesive Metasurfaces. ACS Applied Materials & Interfaces. 2022;14(41):47198-47208.
Barbe V, Wolinski A, Jacquin J, Derippe G, Philip L, Cheng J et al. Les outils Omics pour décrypter les voies de biodégradation des PHAs. 2022..
Lemartinel A, Castro M, Fouché O, De-Luca J, Feller J. A Review of Nanocarbon-Based Solutions for the Structural Health Monitoring of Composite Parts Used in Renewable Energies. Journal of Composites Science. 2022;6(2):32.
Praveen K, Primc G, Simoncic B, Gorjanc M, Pillin I, Seantier B et al. Plasma-assisted fabrication of hydrophobic siloxane based sol-gel-coated coir fibres. Surface Innovations. 2022;10(2):128-139.
Du Q, Bel-Brunon A, Lambert S, Hamila N. Numerical simulation of wave propagation through interfaces using the extended finite element method for magnetic resonance elastography. Journal of the Acoustical Society of America. 2022;151(5):3481-3495.
Ahmed H, Ríos H, Benbouzid M. Continuous Sliding-Mode Control of Tidal Stream Turbine*. IFAC-PapersOnLine. 2022;55(31):142-147.
Boukoberine M, Donateo T, Benbouzid M. Optimized Energy Management Strategy for Hybrid Fuel Cell Powered Drones in Persistent Missions using Real Flight Test Data. IEEE Transactions on Energy Conversion. 2022;37(3)
Nuñez del Prado E, Challamel N, Picandet V. Discrete and nonlocal solutions for the lattice Cattaneo–Vernotte heat diffusion equation. Mathematics and Mechanics of Complex Systems. 2021;9(4):367-396.
Ahmed H, Biricik S, Komurcugil H, Benbouzid M. Enhanced Quasi Type-1 PLL-Based Multi-Functional Control of Single-Phase Dynamic Voltage Restorer. Applied Sciences. 2021;12(1):146.
Rahim O, Achoura D, Benzerara M, Perlot-Bascoules C. Experimental contribution to the study of the physic-mechanical behavior and durability of high-performance concretes based on ternary binder (cement, silica fume and granulated blast furnace slag). Frattura ed Integrità Strutturale = Fracture and Structural Integrity. 2021;16(59):344-358.
Kouider N, Hadidane Y, Benzerara M. Numerical investigation of the cold-formed I-beams bending strength with different web shapes. Frattura ed Integrità Strutturale = Fracture and Structural Integrity. 2021;16:153-171.
Loiseau M, Chataigner S, Créac'Hcadec R, Sourisseau Q, Quéméré M, Court J et al. Determination of Creep Behaviour of Adhesively Bonded Assembly -Application to Adhesively Bonded Steel Fasteners. 2021;2365–2377.
Benyamina F, Benrabah A, Khoucha F, Zia M, Achour Y, Benbouzid M. An augmented state observer-based sensorless control of grid-connected inverters under grid faults. International Journal of Electrical Power & Energy Systems. 2021;133:107222.
Picandet V, Challamel N. Nonlocal thermal diffusion in one-dimensional periodic lattice. International Journal of Heat and Mass Transfer. 2021;180:121753.
Barati M, Amini B, Segouin V, Daniel L, Arbab Chirani S, Calloch S. Investigation of self-heating and dissipative effects in ferroelectric ceramics subjected to compressive mechanical cyclic loading. Acta Materialia. 2021;221:117386.
Pawar A, Ausias G, Férec J. Dynamics of gas bubbles in fiber suspensions. International Journal of Multiphase Flow. 2021;145:103823.
Archibong F, Sanusi O, Médéric P, Aït Hocine N. An overview on the recycling of waste ground tyre rubbers in thermoplastic matrices: Effect of added fillers. Resources, Conservation and Recycling. 2021;175:105894.
Martin D, Monbet V, Sire O, Le Corvec M, Loréal O. Multi-resolution B-splines data compression improves MIR spectroscopy-based Health diagnostic efficiency. Talanta Open. 2021;4:100063.
Carrère N, Doitrand A, Martin E, Leguillon D. Theoretical study based on 2D assumptions of the influence of small pores on crack initiation in adhesively bonded joints. International Journal of Adhesion and Adhesives. 2021;111:102979.
Tran C, Barchiesi E, Placidi L, León Trujillo F. A block-based variational elasto-damage model for masonry analysis inspired from granular micromechanics: Preliminary study. Mechanics Research Communications. 2021;118:103802.
Fabre P, Lagarde F, Bruzaud S, Duflos G, Galgani F, Gastaldi E et al. Les dangers de l'invasion plastique. 2021..
Benyamina F, Benrabah A, Khoucha F, Zia M, Achour Y, Benbouzid M. Online current limiting-based control to improve fault ride-through capability of grid-feeding inverters. Electric Power Systems Research. 2021;201:107524.
El Harouri K, El Hani S, El Aissaoui F, Benbouzid M, Mediouni H. Electric Vehicle Charging Station: a Review of Energy Management Systems and Control Type. International Journal on Energy Conversion (IRECON). 2021;9(6):251.
Idres C, Dehouche N, Chikh A, Zembouai I, Kaci M, Bruzaud S. polymer processing society 36th annual meeting. 2021..
Methneni N, Ezdini K, Ben Abdeljelil N, van Loco J, van den Houwe K, Jabeur R et al. Occurrence of Textile Dyes and Metals in Tunisian Textile Dyeing Effluent: Effects on Oxidative Stress Status and Histological Changes in Balb/c Mice. International Journal of Molecular Sciences. 2021;22(22):12568.
Chen H, Li Q, Benbouzid M, Han J, Aït-Ahmed N. Development and Research Status of Tidal Current Power Generation Systems in China. Journal of Marine Science and Engineering. 2021;9(11):1286.
Odobel C, Dussud C, Philip L, Derippe G, Lauters M, Eyheraguibel B et al. Bacterial Abundance, Diversity and Activity During Long-Term Colonization of Non-biodegradable and Biodegradable Plastics in Seawater. Frontiers in Microbiology. 2021;12
Toasa Caiza P, Sire S, Ummenhofer T, Uematsu Y. Low cost estimation of Wöhler and Goodman–Haigh curves of Ti‐6Al‐4V samples by considering the stress ratio effect. Fatigue and Fracture of Engineering Materials and Structures. 2021..
Abbache M, Tabbache B, Douida S, Benbouzid M. Direct torque control scheme for nine switches inverter fed two induction motors‐based more electric vehicle powertrains. International Transactions on Electrical Energy Systems. 2021;31(12)
Xin B, Zheng Y, Wang T, Chen L, Wang Y. A diagnosis method based on depthwise separable convolutional neural network for the attachment on the blade of marine current turbine. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 2021;235(10):1916-1926.
Elbouchikhi E, Zia M, Benbouzid M, El Hani S. Overview of Signal Processing and Machine Learning for Smart Grid Condition Monitoring. Electronics. 2021;10(21):2725.
Le Loeuff J, Boy V, Morançais P, Colinart T, Bourgougnon N, Lanoisellé J. Mathematical Modeling of Air Impingement Drying of the Brown Algae Sargassum muticum (Fucales). Chemical Engineering and Technology. 2021;44(11):2073-2081.
Ahmed H, Biricik S, Benbouzid M. Enhanced Frequency Adaptive Demodulation Technique for Grid-Connected Converters. IEEE Transactions on Industrial Electronics. 2021;68(11):11053-11062.
Challamel N, Kocsis A. Geometrically exact bifurcation and post-buckling analysis of the granular elastica. International Journal of Non-Linear Mechanics. 2021;136:103772.
Maksimov V, Barchiesi E, Misra A, Placidi L, Timofeev D. Two-Dimensional Analysis of Size Effects in Strain-Gradient Granular Solids with Damage-Induced Anisotropy Evolution. Journal of Engineering Mechanics - ASCE. 2021;147(11)
Thévenin N, Mortas N, Cirederf Boulant D, Kedzierski M, Bruzaud S, Yeuch V et al. Recherche des microplastiques dans les Produits Résiduaires Organiques (PROs). 2021..
Colinart T, Pajeot M, Vinceslas T, Hellouin de Menibus A, Lecompte T. Thermal conductivity of biobased insulation building materials measured by hot disk: Possibilities and recommendation. Journal of Building Engineering. 2021;43:102858.
Hafez M, Ratanpara A, Martiniere Y, Dagois M, Ghazvini M, Kavosi M et al. CO2-monoethanolamine-induced oil swelling and viscosity reduction for enhanced oil recovery. Journal of Petroleum Science and Engineering. 2021;206:109022.
Ghanem R, Roquefort P, Ramel S, Laurent V, Haute T, Le Gall T et al. Apparent Yield Stress of Sputum as a Relevant Biomarker in Cystic Fibrosis. Cells. 2021;10(11):3107.
Le Lan M, Yvin M, Estorgues V, Gicquel M, Mondy S, Faivre-Primot C et al. Biomaleg - Dégradabilité dans les sols des matériaux de la filière légumière. 2021..
Ahmed H, Tir Z, Verma A, Ben Elghali S, Benbouzid M. Quasi Type-1 PLL With Tunable Phase Detector for Unbalanced and Distorted Three-Phase Grid. IEEE Transactions on Energy Conversion. 2021;37(2):1369-1378.
Morgan M, James D, Monloubou M, Olsen K, Sandnes B. Subdiffusion model for granular discharge in a submerged silo. Physical Review E. 2021;104
Belaid A, Methneni N, Nasri E, Bchir S, Anthonissen R, Verschaeve L et al. Endocrine Disruption, Cytotoxicity and Genotoxicity of an Organophosphorus Insecticide. Sustainability. 2021;13(20):11512.
Djourachkovitch T, Blal N, Hamila N, Gravouil A. Multiscale topology optimization of 3D structures: A micro-architectured materials database assisted strategy. Computers & Structures. 2021;255:106574.
Gasparoto H, Chocron O, Bourgeot J, Benbouzid M, Meirelles P. A Task-based Method for Underwater Drones Waterproof Thrusters Power Computation. 2021;1-6.
Le Duigou A, Fruleux T, Matsuzaki R, Chabaud G, Ueda M, Castro M. 4D printing of continuous flax-fibre based shape-changing hygromorph biocomposites: Towards sustainable metamaterials. Materials & Design. 2021;211
Berghout T, Benbouzid M, Bentrcia T, Ma X, Djurović S, Mouss L. Machine Learning-Based Condition Monitoring for PV Systems: State of the Art and Future Prospects. Energies. 2021;14(19):6316.
Amara S, Toumi S, Salah C, Saidi A. Improvement of techno-economic optimal sizing of a hybrid off-grid micro-grid system. Energy. 2021;233:121166.
Reyne B, Hérault D, Thuillier S, Manach P. Quality of the strain state in simple shear testing using field measurement techniques. International Journal of Mechanical Sciences. 2021;208:106660.
Ganci F, Patella B, Cannata E, Cusumano V, Aiello G, Sunseri C et al. Ni alloy nanowires as high efficiency electrode materials for alkaline electrolysers. International Journal of Hydrogen Energy. 2021;46(72):35777-35789.
Nuez L, Magueresse A, Lu P, Day A, Boursat T, d'Arras P et al. Flax xylem as composite material reinforcement: Microstructure and mechanical properties. Composites Part A: Applied Science and Manufacturing. 2021;149:106550.
Férec J, Bertevas E, Khoo B, Ausias G, Phan-Thien N. Rigid fiber motion in slightly non-Newtonian viscoelastic fluids. Physics of Fluids. 2021;33(10):103320.
Desvaux M, Chauwin M, Multon B, Sire S, Ben Ahmed H. Experimental validation of a transverse flux magnetic gear. Journal of Magnetism and Magnetic Materials. 2021;536:168139.
Sabir H, Ouassaid M, Ngote N, Benbouzid M. A Novel Experimental Method to Detect Early Rotor Faults in Induction Machines. International Journal on Energy Conversion (IRECON). 2021;9(5):191.
Kanthila C, Boodi A, Beddiar K, Amirat Y, Benbouzid M. Markov Chain-based Algorithms for Building Occupancy Modeling: A Review. 2021;438-443.
Adlafi M, Galpin B, Mahéo L, Roth C, Mohr D, Grolleau V. Plane strain tension fracture at high strain rate. 2021;250:01020.
https://www.epj-conferences.org/
Benbouzid M, Berghout T, Sarma N, Djurović S, Wu Y, Ma X. Intelligent Condition Monitoring of Wind Power Systems: State of the Art Review. Energies. 2021;14(18):5967.
Muchharla B, Malali P, Daniel B, Kondori A, Asadi M, Cao W et al. Tri-molybdenum phosphide (Mo3P) and multi-walled carbon nanotube junctions for volatile organic compounds (VOCs) detection. Applied Physics Letters. 2021;119(11)
Melelli A, Shah D, Hapsari G, Cortopassi R, Durand S, Arnould O et al. Lessons on textile history and fibre durability from a 4,000-year-old Egyptian flax yarn. Nature Plants. 2021;7(9):1200-1206.
Rouway M, Nachtane M, Tarfaoui M, Chakhchaoui N, Omari L, Fraija F et al. Mechanical Properties of a Biocomposite Based on Carbon Nanotube and Graphene Nanoplatelet Reinforced Polymers :. Journal of Composites Science. 2021;5(9):234.
Benmahdi F, Oulmi K, Khettaf S, Kolli M, Merdrignac-Conanec O, Mandin P. Synthesis and characterization of microporous granular activated carbon from Silver berry seeds using ZnCl2 activation. Fullerenes, Nanotubes and Carbon Nanostructures. 2021;29(9):657-669.
Perrot A, Pierre A, Nerella V, Wolfs R, Keita E, Nair S et al. From analytical methods to numerical simulations: A process engineering toolbox for 3D concrete printing. Cement and Concrete Composites. 2021;122(6):104164.
Guna V, Yadav C, Maithri B, Ilangovan M, Touchaleaume F, Saulnier B et al. Wool and coir fiber reinforced gypsum ceiling tiles with enhanced stability and acoustic and thermal resistance. Journal of Building Engineering. 2021;41:102433.
Noirjean C, Drévillon L, Peter A, Giblaine M, Lendormi T, Lanoiselle J et al. Bolus en nutrition animale : étude du délitement in vitro des comprimés pour une libération prolongée des éléments minéraux. IAA La revue des industries agroalimentaires. 2021;2021-0910(septembre octobre):38-42.
https://www.revue-iaa.fr/
Barbier O, Amouyel T, de L’escalopier N, Cordier G, Baudrier N, Benoist J et al. Osteochondral lesion of the talus: What are we talking about? Orthopaedics & Traumatology: Surgery & Research. 2021;103068.
Champy C, Le Saux V, Marco Y, Glanowski T, Charrier P, Hervouet W. Fatigue of crystallizable rubber: Generation of a Haigh diagram over a wide range of positive load ratios. International Journal of Fatigue. 2021;150:106313.
Colinart T, Noel H, Batard M, Fuentes A, Magueresse A, Glouannec P. Air preheating potential with high Opaque Ventilated Façade under natural and forced convection. 2021..
Soccalingame L, Palazot M, Yvin M, Ciréderf D, Kedzierski M, Bruzaud S. 17èmes Journées de la Matière Condensée. 2021..
Thappily P, Mandin P, Sauvage T, Sandhya K. Enhancement of charge transport properties of a novel rubbery semiconductor via silver nanocomplexing. Materials Science in Semiconductor Processing. 2021;131:105854.
Maziz A, Tarfaoui M, Rechak S, Nachtane M, Gemi L. Finite Element Analysis of Impact-Induced Damage in Pressurized Hybrid Composites Pipes. International Journal of Applied Mechanics. 2021;13(07):2150074.
Buccheri B, Ganci F, Patella B, Aiello G, Mandin P, Inguanta R. Ni-Fe alloy nanostructured electrodes for water splitting in alkaline electrolyser. Electrochimica Acta. 2021;388:138588.
Iordache M, Badulescu C, Diakhate M, Constantin M, Nitu E, Demmouche Y et al. A numerical strategy to identify the FSW process optimal parameters of a butt-welded joint of quasi-pure copper plates: modeling and experimental validation. International Journal of Advanced Manufacturing Technology. 2021;115(7-8):2505-2520.
Soccalingame L, Palazot M, Yvin M, Cirederf Boulant D, Wakkaf T, Kedzierski M et al. Polymer science and microplastics in the environment. 2021..
Giermanska J, Ben-Jabrallah S, Delorme N, Vignaud G, Chapel J. Direct experimental evidences of the density variation of ultrathin polymer films with thickness. Polymers. 2021;228:123934.
Gautreau M, Kervoelen A, Barteau G, Delattre F, Colinart T, Pierre F et al. Fibre Individualisation and Mechanical Properties of a Flax-PLA Non-Woven Composite Following Physical Pre-Treatments. Coatings. 2021;11(7):846.
Misra A, Placidi L, Dell’isola F, Barchiesi E. Identification of a geometrically nonlinear micromorphic continuum via granular micromechanics. Zeitschrift für Angewandte Mathematik und Physik = Journal of Applied mathematics and physics = Journal de mathématiques et de physique appliquées. 2021;72(4):157.
Carlone P, Thuillier S, Andrade-Campos A, de Sousa R, Valente R. Incremental forming of friction-stir welded aluminium blanks: an integrated approach. International Journal of Material Forming. 2021;14(5):1121-1137.
Challamel N, Kaplunov J, Takewaki I. Modern Trends in Structural and Solid Mechanics 1. 2021;
Karlík M, Haušild P, Pilvin P, Carron D. Evolution of the Microstructure of a CuCr1Zr Alloy during Direct Heating by Electric Current. Metals. 2021;11(7):1074.
Han Z, Mauger C, Chaise T, Elguedj T, Arrigoni M, El Hajem M et al. Experimental and Analytical Study of under Water Pressure Wave Induced by the Implosion of a Bubble Generated by Focused Laser. Sensors. 2021;21(14):4800.
Lecuyer-Le Bris R, Le Boulluec M, Charpentier J, Benbouzid M. Kernel Function Definition Completion for Time–Domain State–Space Representations of Radiation Forces: Application to the Hankel Singular Value Decomposition. Journal of Marine Science and Engineering. 2021;9(7):768 (23p.).
Oliveira M, Thuillier S, Andrade-Campos A. Evaluation of heterogeneous mechanical tests for model calibration of sheet metals. Journal of Strain Analysis for Engineering Design. 2021;57(3):208-224.
Nguyen T, Le Grognec P. Analytical and numerical simplified modeling of a single-lap joint. International Journal of Adhesion and Adhesives. 2021;108:102827.
Melelli A, Pantaloni D, Balnois E, Arnould O, Jamme F, Baley C et al. Investigations by AFM of Ageing Mechanisms in PLA-Flax Fibre Composites during Garden Composting. Polymers. 2021;13(14):2225.
Kedzierski M, Palazot M, Yvin M, Cirederf Boulant D, Soccalingame L, Bruzaud S. Evaluation du flux de microplastiques dans les sols français. 2021..
Arhant M, Lolive E, Bonnemains T, Davies P. Fatigue crack growth properties of carbon-polyamide 6 thermoplastic composites using a multi-ΔG control method. Engineering Fracture Mechanics. 2021;252:107825 (14p.).
Martins J, Thuillier S, Andrade-Campos A. Calibration of a modified Johnson-Cook model using the Virtual Fields Method and a heterogeneous thermo-mechanical tensile test. International Journal of Mechanical Sciences. 2021;202-203:106511.
Tartière J, Arrigoni M, Nême A, Groeneveld H, van Der Veen S. PVDF Based Pressure Sensor for the Characterisation of the Mechanical Loading during High Explosive Hydro Forming of Metal Plates. Sensors. 2021;21(13):4429.
Li Y, Challamel N, Elishakoff I. Stochastic analysis of lattice, nonlocal continuous beams in vibration. Vietnam Journal of Mechanics. 2021;43(2):139-170.
Ha G, Oliveira M, Andrade-Campos A, Manach P, Thuillier S. Prediction of coupled 2D and 3D effects in springback of copper alloys after deep drawing. International Journal of Material Forming. 2021;14(5):1171-1187.
Laaouidi H, Tarfaoui M, Nachtane M, Trihi M, Lagdani O. Modal analysis of composite nozzle for an optimal design of a tidal current turbine. Journal of Naval Architecture and Marine Engineering. 2021;18(1):39-54.
https://www.banglajol.info/index.php/JNAME/article/view/53193
Gle P, Lecompte T, Hellouin de Menibus A, Lenormand H, Arufe S, Chateau C et al. Densities of hemp shiv for building, part I: multiscale characterization. 2021;7 p.
Gle P, Lecompte T, Hellouin de Menibus A, Lenormand H, Arufe S, Chateau C et al. Densities of hemp shiv for building, part II: modelling applications. 2021;8 p.
Audren M, Guihéneuf S, Rangeard D, Perrot A. Erosion Behaviour of Bio-Stabilised Earthen Materials. 2021;234-244.
Colinart T, Pajeot M, Vinceslas T, Hellouin de Menibus A, Lecompte T. How reliable is the thermal conductivity of biobased building insulating materials measured with Hot Disk? 2021;1:287-292.
Guihéneuf S, Perrot A, Rangeard D, Cocheteux M. Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples. 2021;255-262.
Leroy E, Bernard A, Furet B, Hascoët J, Le-Bail A, Le Duigou A et al. The MAD4AM cluster: Toward a Multisectorial Accepted Development For Additive Manufacturing. 2021..
Réquilé S, Mazian B, Grégoire M, Musio S, Gautreau M, Nuez L et al. Exploring the dew retting feasibility of hemp in very contrasting European environments: Influence on the tensile mechanical properties of fibres and composites. Industrial Crops and Products. 2021;164:113337.
Glé P, Lecompte T, Hellouin de Ménibus A, Lenormand H, Arufe S, Chateau C et al. Densities of hemp shiv for building: From multiscale characterisation to application. Industrial Crops and Products. 2021;164:113390.
Ouchen S, Benbouzid M, Blaabjerg F, Betka A, Steinhart H. Direct Power Control of Shunt Active Power Filter Using Space Vector Modulation Based on Supertwisting Sliding Mode Control. IEEE Journal of Emerging and Selected Topics in Power Electronics. 2021;9(3):3243-3253.
Bertrand J, Jumel J, Renart J, Kopp J. Theoretical assessment of ELS test data reduction technique using virtual testing. International Journal of Fracture. 2021;229(2):195-213.
Popineau V, Célino A, Le Gall M, Martineau L, Baley C, Le Duigou A. Vacuum-Bag-Only (VBO) Molding of Flax Fiber-reinforced Thermoplastic Composites for Naval Shipyards. Applied Composite Materials. 2021;28(3):791-808.
Habbouche H, Benkedjouh T, Amirat Y, Benbouzid M. Gearbox Failure Diagnosis Using a Multisensor Data-Fusion Machine-Learning-Based Approach. Entropy. 2021;23(6):697.
Ahmed H, Biricik S, Benbouzid M. Linear Kalman Filter-Based Grid Synchronization Technique: An Alternative Implementation. IEEE Transactions on Industrial Informatics. 2021;17(6):3847-3856.
Melelli A, Durand S, Arnould O, Richely E, Guessasma S, Jamme F et al. Extensive investigation of the ultrastructure of kink-bands in flax fibres. Industrial Crops and Products. 2021;164:113368.
Augier B, Paillard B, Sacher M, Leroux J, Aubin N. Numerical and Experimental Comparison of Spinnaker Aerodynamics Close to Curling. Journal of Sailing Technology. 2021;6(01):118-132.
Benzerara M, Guiheneuf S, Belouettar R, Perrot A. Combined and synergic effect of algerian natural fibres and biopolymers on the reinforcement of extruded raw earth. Construction and Building Materials. 2021;289:123211.
Scolan Y, Etienne S. Properties of the pressure field in highly nonlinear free surface flows with critical jet. Journal of Engineering Mathematics. 2021;128(1)
Yao G, Wang Y, Benbouzid M, Ait-Ahmed M. A Hybrid Gearbox Fault Diagnosis Method Based on GWO-VMD and DE-KELM. Applied Sciences. 2021;11(11):4996.
Barchiesi E, Misra A, Placidi L, Turco E. Granular micromechanics‐based identification of isotropic strain gradient parameters for elastic geometrically nonlinear deformations. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2021;101(11)
Fnaiech M, Guzinski J, Trabelsi M, Kouzou A, Benbouzid M, Luksza K. MRAS-Based Switching Linear Feedback Strategy for Sensorless Speed Control of Induction Motor Drives. Energies. 2021;14(11):3083.
Placidi L, Barchiesi E, Misra A, Timofeev D. Micromechanics-based elasto-plastic–damage energy formulation for strain gradient solids with granular microstructure. Continuum Mechanics and Thermodynamics. 2021;33(5):2213-2241.
Gonzalez C, Espinosa A, Ponte D, Gibeaux S. Smart-IoT Platform to Monitor Microclimate Conditions in Tropical Regions. 2021;835(1):012011.
Neukirch S, Yavari M, Challamel N, Thomas O. Comparison of the Von Kármán and Kirchhoff models for the post-buckling and vibrations of elastic beams. Journal of Theoretical, Computational and Applied Mechanics. 2021;1-18.
Galisson S, Carron D, Masson P, Stamoulis G, Feulvarch E, Surdon G. Hardness prediction of AA 2024-T3 FSW weld. 2021;1016 MSF:1857-1862.
Ahmed H, Biricik S, Benbouzid M. A Quasi open‐loop robust three‐phase grid‐synchronization technique for non‐ideal grid. IET Generation, Transmission and Distribution. 2021;15(24):3388-3399.
Rouway M, Nachtane M, Tarfaoui M, Chakhchaoui N, Omari L, Fraija F et al. 3D printing: rapid manufacturing of a new small-scale tidal turbine blade. International Journal of Advanced Manufacturing Technology. 2021..
Latrache N, Mutabazi I. Transition to turbulence via flame patterns in viscoelastic Taylor–Couette flow. European Physical Journal E: Soft matter and biological physics. 2021;44(5):63.
Boukoberine M, Zia M, Benbouzid M, Zhou Z, Donateo T. Hybrid fuel cell powered drones energy management strategy improvement and hydrogen saving using real flight test data. Energy Conversion and Management. 2021;236:113987.
Baho O, Ausias G, Grohens Y, Barile M, Lecce L, Férec J. Automated fibre placement process for a new hybrid material: A numerical tool for predicting an efficient heating law. Composites Part A: Applied Science and Manufacturing. 2021;144:106360.
Kacem A, Laurent H, Thuillier S. Influence of experimental boundary conditions on the calibration of a ductile fracture criterion. Engineering Fracture Mechanics. 2021;248:107686.
Baley C, Bourmaud A, Davies P. Eighty years of composites reinforced by flax fibres: A historical review. Composites Part A: Applied Science and Manufacturing. 2021;144:106333 (10p.).
Lafilé V, Galpin B, Mahéo L, Roth C, Grolleau V. Toward the use of small size bulge tests: Numerical and experimental study at small bulge diameter to sheet thickness ratios. Journal of Materials Processing Technology. 2021;291:117019.
Nematollahi A, Shahinzadeh H, Nafisi H, Vahidi B, Amirat Y, Benbouzid M. Sizing and Sitting of DERs in Active Distribution Networks Incorporating Load Prevailing Uncertainties Using Probabilistic Approaches. Applied Sciences. 2021;11(9):4156.
Iordache M, Badulescu C, Diakhate M, Constantin M, Nitu E, Demmouche Y et al. A numerical strategy to identify the FSW process optimal parameters of a butt-welded joint of quasi-pure copper plates. International Journal of Advanced Manufacturing Technology. 2021..
Lagdani O, Tarfaoui M, Nachtane M, Trihi M, Laaouidi H. Modal analysis of an iced offshore composite wind turbine blade. Wind Engineering. 2021;0309524X2110116.
Mayer-Laigle C, Foulon L, Denoual C, Pernes M, Rondet E, Magueresse A et al. Flax shives-PBAT processing into 3D printed fluorescent materials with potential sensor functionalities. Industrial Crops and Products. 2021;167:113482.
Aboutair W, Chaid R, Perrot A. Impact of the nature of fibers on the physicomechanical behavior and durability of cement matrices. Iranian Journal of Science and Technology-Transactions of Civil Engineering. 2021;45(3):1467-1482.
Rodler A, Lauzet N, Musy M, Azam M, Guernouti S, Mauree D et al. Urban Microclimate and Building Energy Simulation Coupling Techniques. 2021;317-337.
Ansari M, Pirouzi S, Kazemi M, Naderipour A, Benbouzid M. Renewable Generation and Transmission Expansion Planning Coordination with Energy Storage System: A Flexibility Point of View. Applied Sciences. 2021;11(8):3303.
Mosquera R, El Hamidi A, Hamdouni A, Falaize A. Generalization of the Neville–Aitken interpolation algorithm on Grassmann manifolds: Applications to reduced order model. International Journal for Numerical Methods in Fluids. 2021;93(7):2421-2442.
Challamel N, Wang C, Zhang H, Elishakoff I. Lattice-Based Nonlocal Elastic Structural Models. 2021;1-50.
Kedzierski M, Le Tilly V. Les microplastiques dans le milieu marin. 2021;120-135.
Baley C, Chauvin C, Le Maguer G. Mer et Littoral : un bien commun ? 2021;233 pages.
Dislaire C, Grohens Y, Seantier B, Muzy M. The impact of molded pulp product process on the mechanical properties of molded Bleached Chemi-Thermo-Mechanical Pulp. Functional Composite Materials. 2021;2(1):7.
Huang J, Boisse P, Hamila N, Gnaba I, Soulat D, Wang P. Experimental and numerical analysis of textile composite draping on a square box. Influence of the weave pattern. Composite Structures. 2021;267:113844.
Zaafouri I, Zrida M, Laurent H, Hamzaoui A. Characterization of polypropylene PPC7712 using the Bulging Test. 2021..
Hérault D, Thuillier S, Lee S, Manach P, Barlat F. Calibration of a strain path change model for a dual phase steel. International Journal of Mechanical Sciences. 2021;194:106217.
Lagdani O, Tarfaoui M, Nachtane M, Trihi M, Laaouidi H. Numerical investigation of ice accretion on an offshore composite wind turbine under critical loads. International Journal of Energy Research. 2021;45(3):4112-4132.
Khoshkonesh A, Nsom B, Bahmanpouri F, Dehrashid F, Adeli A. Numerical Study of the Dynamics and Structure of a Partial Dam-Break Flow Using the VOF Method. Water Resources Management. 2021;35(5):1513-1528.
Albert J, Le Corvec M, Berthoud O, David C, Guennoc X, Hoppé E et al. Ruling out septic arthritis risk in a few minutes using mid-infrared spectroscopy in synovial fluids. Rheumatology. 2021;60(3):1158-1165.
Boudounit H, Tarfaoui M, Saifaoui D, Qureshi Y. Parametric Study of Accidental Impacts on an Offshore Wind Turbine Composite Blade. Journal of Bio- and Tribo-Corrosion. 2021;7(1)
Guruprasad T, Keryvin V, Charleux L, Guin J, Arnould O. On the determination of the elastic constants of carbon fibres by nanoindentation tests. Carbon. 2021;173:572-586.
Massoumi S, Challamel N, Lerbet J. Exact Solutions for the Vibration of Finite Granular Beam Using Discrete and Gradient Elasticity Cosserat Models. Journal of Sound and Vibration. 2021;494:115839.
Jayapragasam P, Le Bideau P, Loulou T. Approximation of heat and mass transport properties for one sided cake baking. Journal of Food Engineering. 2021;290:110211.
Jacquet Y, Perrot A, Picandet V. Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application. Cement and Concrete Research. 2021;140:106305.
Tariel H, Sire O. MIR Spectroscopy: The Medical Diagnosis Swiss Knife? PhotonicsViews. 2021;18(1):50-53.
Raimbaud Q, Monloubou M, Kerampran S, Cantat I. Impact of a shock wave on a heterogeneous foam film. Journal of Fluid Mechanics. 2021;908
Lemechko P, Volant C, Thomas T, Derippe G, Ghiglione J, Bruzaud S. 2èmes Journées annuelles du GdR Polymères et Océans. 2021..
Croteau J, Peroni M, Atieh S, Jacques N, Cantergiani E. Effect of Strain Rate on the Tensile Mechanical Properties of Electron Beam Welded OFE Copper and High-Purity Niobium for SRF Applications. Journal of Dynamic Behavior of Materials. 2021..
Craipeau T, Toussaint F, Perrot A, Lecompte T. Experimental approach on a moving formwork. Construction and Building Materials. 2021;270:121472.
Castillo A, Gaume B, Rouizi Y, Quéméner O, Glouannec P. Identification of insulating materials thermal properties by inverse method using reduced order model. International Journal of Heat and Mass Transfer. 2021;166:120683.
Wakkaf T, El Zrellib R, Kedzierski M, Palazot M, Bruzaud S, Rabaoui L. Evaluation de la pollution par les microplastiques dans les eaux de surface de la lagune anthropisée de Bizerte. 2021..
Demazel N, Laurent H, Le Masson P, Salmon-Legagneur H, Carin M. A direct resistance heating method for shaped blank. Journal of Manufacturing Processes. 2021;62:772-783.
de Kergariou C, Le Duigou A, Popineau V, Gager V, Kervoelen A, Perriman A et al. Measure of porosity in flax fibres reinforced polylactic acid biocomposites. Composites Part A: Applied Science and Manufacturing. 2021;141:106183.
Berghout T, Mouss L, Bentrcia T, Elbouchikhi E, Benbouzid M. A deep supervised learning approach for condition-based maintenance of naval propulsion systems. Ocean Engineering. 2021;221:108525.
Chiasson-Poirier L, Lecompte T, Hellouin de Ménibus A. Static and long term compression behavior of hemp shiv for floating floor application. Construction and Building Materials. 2021;268:121220.
Chiasson-Poirier L, Lecompte T, Hellouin de Ménibus A. Static and long term compression behavior of hemp shiv for floating floor application. Construction and Building Materials. 2021;268:121220.
Tayeh C, Girault G, Guevel Y, Cadou J. Numerical time perturbation and resummation methods for nonlinear ODE. Nonlinear Dynamics. 2021;103(1):617-642.
Pantaloni D, Rudolph A, Shah D, Baley C, Bourmaud A. Interfacial and mechanical characterisation of biodegradable polymer-flax fibre composites. Composites Science and Technology. 2021;201:108529.
Espinosa A, Ponte D, Gibeaux S, González C. ESTUDIO DE SISTEMAS IOT APLICADOS A LA AGRICULTURA INTELIGENTE. Revista Plus Economía. 2021..
Yazdanyar A, Pantaloni D, Aschauer U, Bowen P. Interactions of Tris with rutile surfaces and consequences for in vitro bioactivity testing. Open Ceramics. 2021;7
Bensiali H, Bidi L, Cicala E, Le Masson P, Chibani M, Boulahlib M. Effects of operating parameters on weld bead morphology with welding operations of API 5L X70 steel pipes by SMAW process. Welding in the World. 2021;65(6):1119-1129.
Buticchi G, Lam C, Xinbo R, Liserre M, Barater D, Benbouzid M et al. The Role of Renewable Energy System in Reshaping the Electrical Grid Scenario. IEEE Open Journal of the Industrial Electronics Society. 2021;2:451-468.
Moghassemi A, Padmanaban S, Ramachandaramurthy V, Mitolo M, Benbouzid M. A Novel Solar Photovoltaic Fed TransZSI-DVR for Power Quality Improvement of Grid-Connected PV Systems. IEEE Access. 2021;9:7263-7279.
Aouat H, Hammiche D, Boukerrou A, Djidjelli H, Grohens Y, Pillin I. Effects of interface modification on composites based on olive husk flour. Materials Today: Proceedings. 2021;36:94-100.
Tarfaoui M, Sassi S, Lagdani O, Nachtane M. Strain rate effects on the thermomechanical behavior of glass/polyester composite joints. Polymer Composites. 2021;:36-51.
Lendormi T, Arris S, Zerdazi R, Lanoiselle J, Bencheikh-Lehocine M, Dermouchi A. The feasibility of combining an electrocoagulation process and a biological treatment for the degradation of cutting oil emulsions. Desalination and Water Treatment. 2021;220:265-276.
Jacquet Y, Picandet V, Perrot A. Characterization of Tensile Behavior of Fresh Cementitious Materials. Materials Journal. 2021;118(6):217-226.
Pottathara Y, Bobnar V, Grohens Y, Thomas S, Kargl R, Kokol V. High dielectric thin films based on UV-reduced graphene oxide and TEMPO-oxidized cellulose nanofibres. Cellulose. 2021;28(5):3069-3080.
Nain V, Engel T, Carin M, Boisselier D, Seguy L. Development of an Elongated Ellipsoid Heat Source Model to Reduce Computation Time for Directed Energy Deposition Process. Frontiers in Materials. 2021;8:747389.
Khammassi S, Tarfaoui M, Qureshi Y, Ben Yahia H. Mechanical properties of graphene nanoplatelets reinforced epikote 828 under dynamic compression. Mechanics of Materials. 2021;158:103873.
Nitu E, Iordache D, Badulescu C. Numerical investigation of the radial cold rolling process of the grooves. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2021;236(3):095440542110245.
Taleb K, Pillin I, Grohens Y, Saidi-Besbes S. Polylactic acid/Gemini surfactant modified clay bio-nanocomposites: Morphological, thermal, mechanical and barrier properties. International Journal of Biological Macromolecules. 2021;177:505-516.
Kanthila C, Boodi A, Beddiar K, Amirat Y, Benbouzid M. Building occupancy behavior and prediction methods: A critical review and challenging locks. IEEE Access. 2021;9:79353-79372.
Richely E, Bourmaud A, Placet V, Guessasma S, Beaugrand J. A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects. Progress in Materials Science. 2021;124:100851 (31).
Maziz A, Tarfaoui M, Gemi L, Rechak S, Nachtane M. A progressive damage model for pressurized filament-wound hybrid composite pipe under low-velocity impact. Composite Structures. 2021;276:114520.
Sacher M, Le Maitre O, Duvigneau R, Hauville F, Durand M, Lothode C. A Non-Nested Infilling Strategy for Multi-Fidelity based Efficient Global Optimization. International Journal for Uncertainty Quantification. 2021;11(1):1-30.
Guiheneuf S, Rangeard D, Perrot A. Processing methods for optimising the mechanical strength of raw earth-based materials. Proceedings of the ICE - Construction Materials. 2021;174(3):150-160.
Le Clerc J, Gasqui M, Laforest L, Beaurain M, Ceinos R, Chemla F et al. Knowledge and opinions of French dental students related to caries risk assessment and dental sealants (preventive and therapeutic). Odontology. 2021;109(1):41-52.
Bellec E, Facchinetti M, Doudard C, Calloch S, Moyne S, Silvestri M. Modelling and identification of fatigue load spectra: Application in the automotive industry. International Journal of Fatigue. 2021;149:106222.
Beucler N, Sellier A, Bernard C, Joubert C, Desse N, Dagain A. Brain metastases in endometrial cancer: a systematic review of the surgical prognostic factors. European Journal of Obstetrics & Gynecology and Reproductive Biology. 2021;258:240-252.
Weger D, Pierre A, Perrot A, Kraenkel T, Lowke D, Gehlen C. Penetration of Cement Pastes into Particle-Beds: A Comparison of Penetration Models. Materials. 2021;14(2)
Habbouche H, Amirat Y, Benkedjouh T, Benbouzid M. Bearing Fault Event-Triggered Diagnosis using a Variational Mode Decomposition-based Machine Learning Approach. IEEE Transactions on Energy Conversion. 2021;1-9.
Morvan A, Nême A, Sacher M, Leroux J, Jochum C, Abiven N. Simulations IFS sur foc en panneaux composites. 2021..
Férec J, Laure P, Silva L, Vincent M. Short fiber composite reinforcements. 2021;627-669.
Ababsa H, Safidine Z, Mekki A, Grohens Y, Ouadah A, Chabane H. Fire behavior of flame-retardant polyurethane semi-rigid foam in presence of nickel (II) oxide and graphene nanoplatelets additives. Journal of Polymer Research. 2021;28(3)
Joseph B, Ninan N, Visalakshan R, Denoual C, Bright R, Kalarikkal N et al. Insights into the biomechanical properties of plasma treated 3D printed PCL scaffolds decorated with gold nanoparticles. Composites Science and Technology. 2021;202:108544.
Spagnuolo M, Barchiesi E. Do We Really Need Pantographic Structures? 2021;127:253-268.
Le Meitour H, Rio G, Laurent H, Lectez A, Guigue P. Analysis of wrinkled membrane structures using a Plane Stress projection procedure and the Dynamic Relaxation method. International Journal of Solids and Structures. 2021;208-209:194-213.
Jacques N, Rodríguez-Martínez J. Influence on strain-rate history effects on the development of necking instabilities under dynamic loading conditions. International Journal of Solids and Structures. 2021;230-231:111152.
Jacquin J, Callac N, Cheng J, Giraud C, Gorand Y, Denoual C et al. Microbial Diversity and Activity During the Biodegradation in Seawater of Various Substitutes to Conventional Plastic Cotton Swab Sticks. Frontiers in Microbiology. 2021;12:604395.
Kedzierski M, Geslain E, Pedrotti M, Ghiglione J, Bruzaud S. Pre-detection of microplastics using active thermography. Chemosphere. 2021;262:127648.
Louge J, Munier R, Doudard C, Calloch S, Weber B. Two new in-plane torsion tests for the investigation of self-heating under pure shear cyclic loading. International Journal of Fatigue. 2021;149:106256.
Fagundes Gasparoto H, Chocron O, Benbouzid M, Siqueira Meirelles P. Advances in Reconfigurable Vectorial Thrusters for Adaptive Underwater Robots. Journal of Marine Science and Engineering. 2021;9(2):170.
Bercelli L, Moyne S, Dhondt M, Doudard C, Calloch S, Beaudet J. A probabilistic approach for high cycle fatigue of Wire and Arc Additive Manufactured parts taking into account process-induced pores. Additive Manufacturing. 2021;42:101989.
N’souglo K, Jacques N, Rodríguez-Martínez J. A three-pronged approach to predict the effect of plastic orthotropy on the formability of thin sheets subjected to dynamic biaxial stretching. Journal of the Mechanics and Physics of Solids. 2021;146:104189.
Nag Chowdhury S, Tran T, Qui Thanh Hoai T, Gunture K, Castro M, Feller J et al. Upgrading of diesel engine exhaust waste into onion-like carbon nanoparticles for integrated degradation sensing in nano-biocomposites. New Journal of Chemistry. 2021;45(7):3675-3682.
Boudounit H, Tarfaoui M, Saifaoui D, El Garouge S. Structural design of offshore wind turbine blade spars. Wind Engineering. 2021..
Ninan N, Joseph B, Visalakshan R, Bright R, Denoual C, Zilm P et al. Plasma assisted design of biocompatible 3D printed PCL/silver nanoparticle scaffolds: in vitro and in vivo analyses. Materials Advances. 2021;2(20):6620-6630.
Kim Y, Zhang S, Grolleau V, Roth C, Mohr D, Yoon J. Robust characterization of anisotropic shear fracture strains with constant triaxiality using shape optimization of torsional twin bridge specimen. CIRP Annals - Manufacturing Technology. 2021;70(1):211-214.
Laaouidi H, Nachtane M, Tarfaoui M, Trihi M. Assessment of offshore wind potential in Morocco. International Journal of Energy Technology and Policy. 2021;17(5):423.
Lagdani O, Tarfaoui M, Nachtane M, Trihi M, Laaouidi H. A numerical investigation of the effects of ice accretion on the aerodynamic and structural behavior of offshore wind turbine blade. Wind Engineering. 2021;45(6):0309524X2098322.
Martinez L, Palessonga D, Roquefort P, Chevalier A, Maalouf A, Ville J et al. Development of a high temperature printable composite for microwave absorption applications. AIMS Materials Science. 2021;8(5):739-747.
Bastos G, Sales L, Di Cesare N, Tayeb A, Le Cam J. Inverse-Pagerank-particle swarm optimisation for inverse identification of hyperelastic models: a feasibility study. Journal of Rubber Research. 2021;24(3):447–460.
Gasqui M, Laforest L, Le Clerc J, Ceinos R, Chemla F, Chevalier V et al. Knowledge and Opinions of French Dental Students in Operative Dentistry - Management of Deep Carious Lesions. Oral Health and Preventive Dentistry. 2021;19(1):627-633.
Brachet J, Urvoy S, Rouesne E, Nony G, Dumerval M, Le Saux M et al. DLI-MOCVD Crx Cy coating to prevent Zr-based cladding from inner oxidation and secondary hydriding upon LOCA conditions. Journal of Nuclear Materials. 2021;550:152953.
Levieil B, Doudard C, Thevenet D, Bridier F, Ezanno A, Calloch S. Taking residual stresses into account in low-cycle fatigue design using the adjustable localisation operator method. International Journal of Fatigue. 2021;150:106322.
Melelli A, Roselli G, Proietti N, Bourmaud A, Arnould O, Jamme F et al. Chemical, morphological and mechanical study of the ageing of textile flax fibers from 17th/18th-century paintings on canvas. Journal of Cultural Heritage. 2021;52:202-214.
Huang J, Boissé P, Hamila N. Simulation of the forming of tufted multilayer composite preforms. Composites Part B: Engineering. 2021;220
Jayapragasam P, Le Bideau P, Loulou T. Selection of better mathematical model describing cake baking for inverse analysis. Food and Bioproducts Processing. 2021;126:265-281.
Mechin P, Keryvin V, Grandidier J. Effect of the nano-filler content on the compressive strength of continuous carbon fibre / epoxy matrix composites. Composites Part B: Engineering. 2021;224:109223.
Denis Y, Hamila N, Itskov M, Guzman-Maldonado E, Morestin F. A dissipative model for deep-drawing simulations: Elastic springback prediction and incremental forming strategies. Composites Part A: Applied Science and Manufacturing. 2021;149
Chenegrin K, Roux J, Helfenstein-Didier C, Pouvreau C, Girinon M, Karaouni H et al. 3D numerical simulation of heat transfer during dry drilling of Inconel 718. Journal of Manufacturing Processes. 2021;64:1143-1152.
Chen H, Li Q, Tang S, Aït-Ahmed N, Han J, Wang T et al. Adaptive super-twisting control of doubly salient permanent magnet generator for tidal stream turbine. International Journal of Electrical Power & Energy Systems. 2021;128:106772.
https://www.sciencedirect.com/journal/international-journal-of-electrical-power-and-energy-systems
Richely E, Durand S, Melelli A, Kao A, Magueresse A, Dhakal H et al. Novel Insight into the Intricate Shape of Flax Fibre Lumen. Fibers. 2021;9(4):24.
Boy V, Ben Khalifa W, Drévillon L, Lemée Y, Lendormi T, Lanoiselle J. Air impingement and intermittent drying: Application to apple and to mango. Canadian Journal of Chemical Engineering. 2021;99(1):120-134.
Craipeau T, Perrot A, Toussaint F, Huet B, Lecompte T. Mortar pore pressure prediction during the first hours of cement hydration. Cement and Concrete Composites. 2021;119
Laaouidi H, Tarfaoui M, Nachtane M, Trihi M. Energy absorption characteristics in hybrid composite materials for marine applications under impact loading: Case of tidal current turbine. International Journal of Energy Research. 2021;45:5894-5911.
Laaouidi H, Tarfaoui M, Nachtane M, Trihi M, Lagdani O. A Comprehensive Numerical Investigation on the Mechanical Performance of Hybrid Composite Tidal Current Turbine under Accidental Impact. International Journal of Automotive and Mechanical Engineering. 2020;17(4):8338-8350.
Le Duigou A, Chabaud G, Matsuzaki R, Castro M. Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters. Composites Part B: Engineering. 2020;203:108474.
Le Loeuff J, Boy V, Lanoiselle J, Morançais P, Bourgougnon N. Stabilisation de la matière algale Sargassum par séchage aux jets d’air impactants. 2020..
El Moubarek Bouzid A, Zerrougui M, Ben Elghali S, Beddiar K, Benbouzid M. Robust Resonant Controllers for Distributed Energy Resources in Microgrids. Applied Sciences. 2020;10(24):8905.
Helbert G, Volkov A, Evard M, Dieng L, Chirani S. On the understanding of damping capacity in SMA: From the material thermomechanical behaviour to the structure response. Journal of Intelligent Material Systems and Structures. 2020;32(11):1167-1184.
Amirat Y, Benbouzid M. The signal demodulation techniques. 2020;51-83.
Elbouchikhi E, Benbouzid M. Parametric signal processing approach. 2020;3-50.
Sire S, Toasa Caiza P, Espion B, Ragueneau M. Contribution to the study of the influence of the stress ratio on the high cycle fatigue behaviour of riveted joints. Fatigue and Fracture of Engineering Materials and Structures. 2020;43(12):3027-3036.
Guiheneuf S, Rangeard D, Cusin T, Collet F, Prétot S, Perrot A. Effect of bio-stabilizers on capillary absorption and water vapour transfer into raw earth. Materials and structures. 2020;53(6)
Riou M, Ausias G, Grohens Y, Gaudry T, Veillé J, Férec J. Thermoplastic foaming with thermo-expandable microcapsules: Mathematical modeling and numerical simulation for extrusion process. Chemical Engineering Science. 2020;227:115852.
Pandya K, Grolleau V, Roth C, Mohr D. Fracture response of resistance spot welded dual phase steel sheets: Experiments and modeling. International Journal of Mechanical Sciences. 2020;187:105869.
Amini B, Demmouche Y, Barati M, Helbert G, Arbab-Chirani S, Calloch S. Self-heating of metastable 304L austenitic stainless steel under cyclic loading: Influence of initial martensite volume fraction, testing temperature and pre-strain. Mechanics of Materials. 2020;151:103596-1-103596-14.
Cadiou S, Courtois M, Carin M, Berckmans W, Le Masson P. 3D heat transfer, fluid flow and electromagnetic model for cold metal transfer wire arc additive manufacturing (CMT-WAAM). Additive Manufacturing. 2020;36:101541.
Berghout T, Mouss L, Kadri O, Saïdi L, Benbouzid M. Aircraft engines Remaining Useful Life prediction with an adaptive denoising online sequential Extreme Learning Machine. Engineering Applications of Artificial Intelligence. 2020;96:103936.
Le Bideau D, Chocron O, Mandin P, Kiener P, Benbouzid M, Sellier M et al. Evolutionary Design Optimization of an Alkaline Water Electrolysis Cell for Hydrogen Production. Applied Sciences. 2020;10(23):8425.
Jackson R, Zulkifli S, Benbouzid M, Salimin S, Khan M, Elhassan G et al. A Comprehensive Motivation of Multilayer Control Levels for Microgrids: Synchronization, Voltage and Frequency Restoration Perspective. Applied Sciences. 2020;10(23):8355.
Hascoët R, Prevosto M, Raillard N, Jacques N, Tassin A. Stochastic prediction of wave impact kinematics and loads for ship appendages. 2020..
Fertala L, Palazot M, Soccalingame L, Kedzierski M, Bruzaud S. Organic matter digestion methods for microplastic extraction from estuarine samplings. 2020..
Kedzierski M, Lechat B, Sire O, Le Maguer G, Le Tilly V, Bruzaud S. Microplastic contamination of packaged meat: occurrence and associated risks. 2020..
Kedzierski M, Fertala L, Palazot M, Soccalingame L, Bruzaud S. MICRO 2020 International conference on fate and impacts of microplastics. 2020..
Vong C, Chevalier A, Azar M, Ville J, Rosnarho J, Laur V. Optimisation de surfaces absorbantes multicouches fabriquées par impression 3D. 2020..
Ausias G, Dolo G, Cartié D, Challois F, Joyot P, Férec J. Modeling and Numerical Simulation of Laminated Thermoplastic Composites Manufactured by Laser-Assisted Automatic Tape Placement. International Polymer Processing. 2020;35(5):471-480.
Bernard C, Keryvin V. Crystalline defects in bulk metallic glasses: consequences on fracture toughness determination and ductility. Journal of Physics: Condensed Matter. 2020;32(48):483001.
Yao G, Pang S, Ying T, Benbouzid M, Ait-Ahmed M, Benkhoris M. VPSO-SVM-Based Open-Circuit Faults Diagnosis of Five-Phase Marine Current Generator Sets. Energies. 2020;13(22):6004.
Wang T, Zhang J, Wang H, Wang Y, Diallo D, Benbouzid M. A multi-mode fault-tolerant control strategy for cascaded Hbridge multilevel inverters. IET Power Electronics. 2020;13(14):3119 – 3126.
Le Saux M, Brachet J, Vandenberghe V, Ambard A, Chosson R. Breakaway oxidation of zirconium alloys exposed to steam around 1000 °C. Corrosion Science. 2020;176(108936):1-21.
Legrand P, Kerampran S, Arrigoni M. Replacing Detonation by Compressed Balloon Approaches in Finite Element Models. Advances in Civil Engineering. 2020;2020:1497632-1-1497632-16.
Nême A, Jochum C. Bateau comportant un cerf-volant. 2020..
Sonebi M, Abdalqader A, Fayyad T, Perrot A, Bai Y. Optimisation of rheological parameters, induced bleeding, permeability and mechanical properties of supersulfated cement grouts. Construction and Building Materials. 2020;262:120078.
Zieger V, Lecompte T, Hellouin de Ménibus A. Impact of GHGs temporal dynamics on the GWP assessment of building materials: A case study on bio-based and non-bio-based walls. Building and Environment. 2020;185:107210.
Melelli A, Jamme F, Legland D, Beaugrand J, Bourmaud A. Microfibril angle of elementary flax fibres investigated with polarised second harmonic generation microscopy. Industrial Crops and Products. 2020;156:112847.
Fertala L, Palazot M, Soccalingame L, Kedzierski M, Bruzaud S. Organic matter digestion methods for microplastic extraction from estuarine samplings. 2020..
Bayati P, Jahadakbar A, Barati M, Nematollahi M, Saint-Sulpice L, Arbab Chirani S et al. Toward low and high cycle fatigue behavior of SLM-fabricated NiTi: Considering the effect of build orientation and employing a self-heating approach. International Journal of Mechanical Sciences. 2020;185:105878.
Nuez L, Gautreau M, Mayer-Laigle C, d'Arras P, Guillon F, Bourmaud A et al. Determinant morphological features of flax plant products and their contribution in injection moulded composite reinforcement. Composites Part C: Open Access. 2020;3:100054.
Qureshi Y, Tarfaoui M, Benyahia H, Lafdi K. Nylon/Ag fiber sensor for real-time damage monitoring of composites subjected to dynamic loading. Smart Materials and Structures. 2020;29(11):115045.
Challamel N, Lerbet J, Darve F, Nicot F. Buckling of granular systems with discrete and gradient elasticity Cosserat continua. Annals of Solid and Structural Mechanics. 2020;12(1-2):7-22.
Julloux A, Brumaud C, Habert G, Perrot A. Variability of Clay in Poured Earth. 2020..
Galisson S, Carron D, Le Masson P, Stamoulis G, Feulvarch E, Surdon G. Experimental investigation for modelling hardness of AA 2024-T3 FSW weld. 2020..
Boyer A, Germain L, Laurent H, Neto D, Oliveira M. Numerical analysis of the bulge test in temperature for the EN AW 6061-T6 sheet. 2020;967(1):012024.
Breton T, Tassin A, Jacques N. Experimental investigation of the water entry and/or exit of axisymmetric bodies. Journal of Fluid Mechanics. 2020;901:A37.
Kedzierski M, Frère D, Le Maguer G, Bruzaud S. Why is there plastic packaging in the natural environment? Understanding the roots of our individual plastic waste management behaviours. Science of the Total Environment. 2020;740:139985.
Flambard J, Amirat Y, Benbouzid M, Feld G, Ruiz N. Shrouded Tidal Stream Turbine Simulation Model Development and Experimental Validation. 2020;2825-2831.
Elbouchikhi E, Benbouzid M, Amirat Y, Feld G. A CFAR-based faults detector for Induction Motors. 2020;2489-2494.
Gager V, Legland D, Bourmaud A, Le Duigou A, Pierre F, Behlouli K et al. Oriented granulometry to quantify fibre orientation distributions in synthetic and plant fibre composite preforms. 2020..
Hachem Z, Célino A, Challita G, Branchu S, Duigou A, Fréour S. Dimensional variation and evolution of mechanical properties of wet aged composites reinforced with flax fibers. Journal of Composite Materials. 2020;55(8):1131-1148.
Bourdon S, Bruyere V, Rogeon P, Namy P, Durand C, Roure S. Numerical Simulation Of Electro-Thermo-Mechanical Phenomena During Resistance Sintering. 2020..
Joseph B, James J, Grohens Y, Kalarikkal N, Thomas S. Additive Manufacturing of Poly (ε-Caprolactone) for Tissue Engineering. JOM Journal of the Minerals, Metals and Materials Society. 2020;72(11):4127-4138.
Nain V, Carin M, Engel T, Boisselier D, Cordier C. Numerical Modeling of Wire + Arc Additive Manufacturing (WAAM) Process. 2020..
Müssig J, Amaducci S, Bourmaud A, Beaugrand J, Shah D. Transdisciplinary top-down review of hemp fibre composites: From an advanced product design to crop variety selection. Composites Part C: Open Access. 2020;2:100010.
Tarfaoui M, Nachtane M, Goda I, Qureshi Y, Benyahia H. Additive manufacturing in fighting against novel coronavirus COVID-19. International Journal of Advanced Manufacturing Technology. 2020;110:2913-2927.
Le Bideau P, Noel H, Yassine H, Glouannec P. Refroidissement de produits légumiers frais. 2020..
Martin E, Leguillon D, Catapano A, Carrère N. Prediction of interfacial debonding between stiff spherical particles and a soft matrix with the coupled criterion. Theoretical and Applied Fracture Mechanics. 2020;109:102749.
Croteau J, Pai Kulyadi E, Kale C, Siu D, Kang D, Perez Fontenla A et al. Effect of strain rate on tensile mechanical properties of high-purity niobium single crystals for SRF applications. Materials Science and Engineering: A. 2020;797:140258-1-140258-15.
Ueda M, Kishimoto S, Yamawaki M, Matsuzaki R, Todoroki A, Hirano Y et al. 3D compaction printing of a continuous carbon fiber reinforced thermoplastic. Composites Part A: Applied Science and Manufacturing. 2020;137:105985.
Ahmed H, Benbouzid M. On the Enhancement of Generalized Integrator-Based Adaptive Filter Dynamic Tuning Range. IEEE Transactions on Instrumentation and Measurement. 2020;69(10):7449-7457.
Bourmaud A, Shah D, Beaugrand J, Dhakal H. Property changes in plant fibres during the processing of bio-based composites. Industrial Crops and Products. 2020;154:112705.
Turner A, Mccoy T, Cao W, Karoui A, Maswadeh W, Vlahovic B et al. Enhanced detection of volatile organic compounds (VOCs) by caffeine modified carbon nanotube junctions. Nano-Structures & Nano-Objects. 2020;24:100578.
Ferec J, Mezi D, Advani S, Ausias G. Axisymmetric flow simulations of fiber suspensions as described by 3D probability distribution function. Journal of Non-Newtonian Fluid Mechanics. 2020;284:104367.
Honoré M, Pimbert S, Lecompte T. Characterisation of plant flours for biocomposite applications focussing on Phragmites australis properties. Biosystems Engineering. 2020;197:367-377.
Le Duigou A, Correa D, Ueda M, Matsuzaki R, Castro M. A review of 3D and 4D printing of natural fibre biocomposites. Materials & Design. 2020;194:108911.
Firouzi M, Nasiri M, Benbouzid M, Gharehpetian G. Application of multi‐step bridge‐type fault current limiter for fault ride‐through capability enhancement of permanent magnet synchronous generator‐based wind turbines. International Transactions on Electrical Energy Systems. 2020;30(11)
Hammiche D, Boukerrou A, Grohens Y, Guermazi N, Arrakhiz F. Mechanical properties and biodegradation of biocomposites based on poly (hydroxybutyrate-co-valerate) and alfa fibers. Journal of Polymer Research. 2020;27(10):308.
Zia M, Nasir M, Elbouchikhi E, Benbouzid M, Vasquez J, Guerrero J. Energy Management System for an Islanded Renewables-based DC Microgrid. 2020;543-547.
Leplat J, Stamoulis G, Bidaud P, Thevenet D. Investigation of the mode I fracture properties of adhesively bonded joints after water ageing. The Journal of Adhesion. 2020;98(1)
Gaudin A, Badran Z, Chevalier V, Aubeux D, Prud'Homme T, Amador del Valle G et al. COVID-19 and Oral Fluids. Frontiers in Dental Medicine. 2020;1:9.
Guilcher P, Jus Y, Brosset L. 2D Simulations of Breaking Wave Impacts on a Flat Rigid Wall - Part 2: Influence of Scale. International Journal of Offshore and Polar Engineering (IJOPE). 2020;30(3):286-298.
Nachtane M, Tarfaoui M, Ledoux Y, Khammassi S, Leneveu E, Pelleter J. Experimental investigation on the dynamic behavior of 3D printed CF-PEKK composite under cyclic uniaxial compression. Composite Structures. 2020;247:112474-1-112474-12.
Jacques N. An analytical model for necking strains in stretched plates under dynamic biaxial loading. International Journal of Solids and Structures. 2020;200-201:198-212.
Combescure C, Elliott R, Triantafyllidis N. Deformation Patterns and their Stability in Finitely Strained Circular Cell Honeycombs. Journal of the Mechanics and Physics of Solids. 2020;142:103976.
Nachtane M, Tarfaoui M, Goda I, Rouway M. A review on the technologies, design considerations and numerical models of tidal current turbines. Renewable Energy. 2020;157:1274-1288.
Vangsøe C, Nørskov N, Devaux M, Bonnin E, Bach Knudsen K, Baley C. Oriented granulometry to quantify fibre orientation distributions in synthetic and plant fibre composite preforms. Industrial Crops and Products. 2020;152(37):1-7.
Ahmed H, Biricik S, Benbouzid M. Low-pass filtering or gain tuning free simple DC offset rejection technique for single and three-phase systems. Electric Power Systems Research. 2020;186:106422.
Roncin K, Behrel M, Iachkine P, Leroux J. Benchmark Sea Trials on a 6-Meter Boat Powered by Kite. Applied Sciences. 2020;10(18):6148-1-6148-26.
Ben Ali J, Azizi C, Saidi L, Bechhoefer E, Benbouzid M. Reliable state of health condition monitoring of Li-ion batteries based on incremental support vector regression with parameters optimization. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 2020;237(4):717-727.
Rangeard D, Perrot A, Rodomond M. Effect of Limestone Powder Addition Quality on SCC Rheology. 2020;23:500-507.
Lerbet J, Nicot F, Challamel N, Darve F. Incremental mechanics: Starting an intrinsic approach. 2020..
Desvaux M, Multon B, Sire S, Ben Ahmed H. 2 x 2D Analytical Model of a Transverse Flux Magnetic Gear. 2020;565-571.
Le Marre M, Mandin P, Thappily P, Zlliox E, Lanoisellé J, Sauvage T. Coupling Micro-Hydropower with electrolyzing, case study. 2020..
Liu X, Boy V, Lendormi T, Lemée Y, Lanoisellé J. Valorization of Common Starfish (Asterias rubens) by Air Impingement Drying and Mesophilic Anaerobic Digestion: A Preliminary Study. Waste and Biomass Valorization. 2020;12(6):2969-2981.
Souli I, Liu X, Lendormi T, Chaira N, Ferchichi A, Lanoisellé J. Anaerobic digestion of waste Tunisian date ( Phoenix dactylifera L.): effect of biochemical composition of pulp and seeds from six varieties. Environmental Technology. 2020;43(4):617-629.
Bretin R, Levesque M, Pilvin P, Bocher P. Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element. International Journal of Fatigue. 2020;137:105634.
Reyne B, Moës N, Manach P. A persistent modal plastic model for instabilities in Al–Mg alloys with 1D application. International Journal of Plasticity. 2020;131:102713.
Leconte N, Bourel B, Lauro F, Badulescu C, Markiewicz E. Strength and failure of an aluminum/PA66 self-piercing riveted assembly at low and moderate loading rates: Experiments and modeling. International Journal of Impact Engineering. 2020;142:103587-1-103587-23.
Barthel E, Keryvin V, Rosales-Sosa G, Kermouche G. Indentation cracking in silicate glasses is directed by shear flow, not by densification. Acta Materialia. 2020;194:473-481.
Tarfaoui M, Nachtane M, Goda I, Qureshi Y, Benyahia H. 3D Printing to support the shortage in personal protective equipment caused by COVID-19 pandemic. Materials. 2020;13(15):1-21.
Le Pavic J, Bonnemains T, Lolive É, Stamoulis G, da Silva D, Thevenet D. Failure load prediction of a tubular bonded structures using a coupled criterion. Theoretical and Applied Fracture Mechanics. 2020;108:102531-1-102531-11.
Nachtane M, Tarfaoui M, Ait Mohammed M, Saifaoui D, El Moumen A. Effects of environmental exposure on the mechanical properties of composite tidal current turbine. Renewable Energy. 2020;156:1132-1145.
Médéric P, Aït Hocine N, Hassan H. Influence of long-term storage on the performance of polyamide-based nanocomposites: Role of nanoclay fillers. Polymer Composites. 2020;41(8):3144-3152.
Hayoune F, Chelouche S, Trache D, Zitouni S, Grohens Y. Thermal decomposition kinetics and lifetime prediction of a PP/PLA blend supplemented with iron stearate during artificial aging. Thermochimica Acta. 2020;690:178700.
Belila A, Berkouk E, Benbouzid M, Amirat Y, Tabbache B, Mamoune A. Control methodology and implementation of a Z-source inverter for a stand-alone photovoltaic-diesel generator-energy storage system microgrid. Electric Power Systems Research. 2020;185:106385.
Péron M, Célino A, Jacquemin F, Le Duigou A. Hygroscopic stresses in asymmetric biocomposite laminates submitted to various relative humidity conditions. Composites Part A: Applied Science and Manufacturing. 2020;134:105896.
Marc S, Ploteau J, Le Bideau P, Glouannec P. Transient heat flux estimation during the baking of cereal batter by contact heating. International Journal of Heat and Mass Transfer. 2020;155:119848.
Pantaloni D, Shah D, Baley C, Bourmaud A. Monitoring of mechanical performances of flax non-woven biocomposites during a home compost degradation. Polymer Degradation and Stability. 2020;177:109166.
Chihi M, Tarfaoui M, Qureshi Y, Benyahia H, Bouraoui C. Graphene nanofillers as a player to improve the dynamic compressive response and failure behavior of carbon/epoxy composite. Nanotechnology. 2020;31(42):425709.
Sauvage - Lirsa Cnam (ea 4603) T, Praveen T, Mandin P. Effect of silver nanoparticle addition on the charge transport properties of MEH:PPV. 2020..
Kahlerras Z, Irinislimane R, Bruzaud S, Belhaneche-Bensemra N. Elaboration and Characterization of Polyurethane Foams Based on Renewably Sourced Polyols. Journal of Polymers and the Environment. 2020;28(11):3003-3018.
Feller J, Castro M, Sachan A, Laquintinie C, Lahuec F, Seguin L. Chemo-resistive polymer nanocomposite transducers for the detection of neurotoxic chemicals. 2020..
Le Bideau D, Mandin P, Benbouzid M, Kim M, Sellier M, Ganci F et al. Eulerian Two-Fluid Model of Alkaline Water Electrolysis for Hydrogen Production. Energies. 2020;13(13):3394.
Bogard F, Beaumont F, Vasserot Y, Simescu-Lazar F, Nsom B, Liger-Belair G et al. Combined Experimental and CFD Approach of Two-Phase Flow Driven by Low Thermal Gradients in Wine Tanks: Application to Light Lees Resuspension. Foods. 2020;9(7):865.
Thappily P, Mandin P, Sauvage T. Charge transport properties of semiconducting natural rubber (Cis 1,4-polyisoprene). Microelectronic Engineering. 2020;231:111373.
Adzima F, Balan T, Manach P. Springback prediction for a mechanical micro connector using CPFEM based numerical simulations. International Journal of Material Forming. 2020;13(4):649-659.
Elbouchikhi E, Feld G, Amirat Y, Benbouzid M, Gall F. Design and experimental implementation of a wind energy conversion platform with education and research capabilities. Computers and Electrical Engineering. 2020;85(3):106661.
Bigi N, Roncin K, Leroux J, Parlier Y. Ship Towed by Kite: Investigation of the Dynamic Coupling. Journal of Marine Science and Engineering. 2020;8(7):486-1-486-29.
Simões V, Oliveira M, Alves J, Laurent H, Oudriss A, Menezes L. Experimental and numerical analysis of the heat generated by plastic deformation in quasi-static uniaxial tensile tests. Mechanics of Materials. 2020;146:103398.
Grohens Y, Vignaud G, Kalarikkal N, James J. Nano-Optics: Fundamentals, Experimental Methods, and Applications. 2020..
Kedzierski M, Lechat B, Sire O, Le Maguer G, Le Tilly V, Bruzaud S. Microplastic contamination of packaged meat: Occurrence and associated risks. Food Packaging and Shelf Life. 2020;24:100489.
Krichen M, Elbouchikhi E, Benhadj N, Chaieb M, Benbouzid M, Neji R. Motor Current Signature Analysis-Based Permanent Magnet Synchronous Motor Demagnetization Characterization and Detection. Machines. 2020;8(35)
Constantin M, Iordache M, Nitu E, Diakhaté M, Demmouche Y, Dhondt M et al. An efficient strategy for 3D numerical simulation of friction stir welding process of pure copper plates. 2020;916:012021-1-012021-8.
https://modtech.ro
Guruprasad T, Keryvin V, Bourmaud A. ESTIMATION OF ANISOTROPIC ELASTIC PROPERTIES OF CARBON FIBERS USING NANOINDENTATION. Acta Polytechnica CTU Proceedings. 2020;27:107-111.
Khamoudj C, Benbouzid-Si Tayeb F, Benatchba K, Benbouzid M, Djaafri A. A Learning Variable Neighborhood Search Approach for Induction Machines Bearing Failures Detection and Diagnosis. Energies. 2020;13
Ismail A, Saidi L, Sayadi M, Benbouzid M. Remaining useful lifetime prediction of thermally aged power insulated gate bipolar transistor based on Gaussian process regression. Transactions of the Institute of Measurement and Control. 2020;42(13):2507-2518.
Ahmed H, Bierhoff M, Benbouzid M. Multiple Nonlinear Harmonic Oscillator-Based Frequency Estimation for Distorted Grid Voltage. IEEE Transactions on Instrumentation and Measurement. 2020;69(6):2817-2825.
Cadou J, Ounis H, Boutyour E, Potier-Ferry M. Asymptotic numerical method and Padé approximants for eigenvalue. Application in linear vibration of plates and shells. Mechanics Research Communications. 2020;106:103538.
Mechtcherine V, Bos F, Perrot A, da Silva W, Nerella V, Fataei S et al. Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review. Cement and Concrete Research. 2020;132:106037.
Ahmed H, Biricik S, Elbouchikhi E, Benbouzid M. Adaptive Filtering-Based Pseudo Open-Loop Three-Phase Grid-Synchronization Technique. Energies. 2020;13(11):2927.
Nuez L, Beaugrand J, Shah D, Mayer-Laigle C, Bourmaud A, D’arras P et al. The potential of flax shives as reinforcements for injection moulded polypropylene composites. Industrial Crops and Products. 2020;148:112324.
Ahmed H, Pay M, Benbouzid M, Amirat Y, Elbouchikhi E. Gain normalized adaptive observer for three-phase system. International Journal of Electrical Power & Energy Systems. 2020;118:105821.
Boodi A, Beddiar K, Amirat Y, Benbouzid M. Simplified Building Thermal Model Development and Parameters Evaluation Using a Stochastic Approach. Energies. 2020;13(11):2899.
Liebscher M, Domurath J, Saphiannikova M, Müller M, Heinrich G, Pötschke P. Dispersion of graphite nanoplates in melt mixed PC/SAN polymer blends and its influence on rheological and electrical properties. Polymer. 2020;200:122577.
Domurath J, Ausias G, Férec J, Saphiannikova M. Numerical investigation of dilute suspensions of rigid rods in power-law fluids. Journal of Non-Newtonian Fluid Mechanics. 2020;280:104280.
Saidi L, Benbouzid M, Diallo D, Amirat Y, Elbouchikhi E, Wang T. Higher-Order Spectra Analysis-Based Diagnosis Method of Blades Biofouling in a PMSG Driven Tidal Stream Turbine. Energies. 2020;13(11):2888.
Wang C, Zhang H, Challamel N, Pan W. Hencky Bar-Chain/Net for Structural Analysis. 2020..
Tarfaoui M, Hamitouche L, Khammassi S, Shah O. Examination of the Delamination of a Stitched Laminated Composite with Experimental and Numerical Analysis Using Mode I Interlaminar. Arabian Journal For Science and Engineering. 2020..
Oliveira M, Thuillier S, Andrade-Campos A. Analysis of Heterogeneous Tests for Sheet Metal Mechanical Behavior. 2020;47:831-838.
Oliveira M, Germain L, Laurent H, Simões V, Neto D, Alves J et al. A Modified Hockett-Sherby Law Enabling the Description of the Thermomechanical Behaviour of the AA6061-T6. 2020;47:896-903.
Andrade-Campos A, Thuillier S, Martins J, Carlone P, Tucci F, Valente R et al. Integrated Design in Welding and Incremental Forming: Material Model Calibration for Friction Stir Welded Blanks. 2020;47:429-434.
Martins J, Andrade-Campos A, Thuillier S. Calibration of Johnson-Cook Model Using Heterogeneous Thermo-Mechanical Tests. 2020;47:881-888.
Ganci F, Cannata E, Cusumano V, Aiello G, Sunseri C, Mandin P et al. Ni alloy nanowires as high efficiency electrode materials for alkaline electrolysers. 2020..
Vinceslas T, Hamard E, Razakamanantsoa A, Bendahmane F. Further development of a laboratory procedure to assess the mechanical performance of cob. Environmental Geotechnics. 2020;7(3):200-207.
Belila A, Amirat Y, Benbouzid M, Berkouk E, Yao G. Virtual synchronous generators for voltage synchronization of a hybrid PV-diesel power system. International Journal of Electrical Power & Energy Systems. 2020;117:105677.
Amirat Y, Oubrahim Z, Ahmed H, Benbouzid M, Wang T. Phasor Estimation for Grid Power Monitoring: Least Square vs. Linear Kalman Filter. Energies. 2020;13(10):2456.
Ouchen S, Steinhart H, Benbouzid M, Blaabjerg F. Robust DPC-SVM control strategy for shunt active power filter based on H∞ regulators. International Journal of Electrical Power & Energy Systems. 2020;117:105699.
Ouyang Z, Bertevas E, Wang D, Khoo B, Férec J, Ausias G et al. A smoothed particle hydrodynamics study of a non-isothermal and thermally anisotropic fused deposition modeling process for a fiber-filled composite. Physics of Fluids. 2020;32(5):053106.
Bain C, Davies P, Bles G, Marco Y, Barnet J. Influence of bedding-in on the tensile performance of HMPE fiber ropes. Ocean Engineering. 2020;203:107144-1-12.
Brachet J, Le Saux M, Bischoff J, Palancher H, Chosson R, Pouillier É et al. Evaluation of Equivalent Cladding Reacted parameters of Cr-coated claddings oxidized in steam at 1200 °C in relation with oxygen diffusion/partitioning and post-quench ductility. Journal of Nuclear Materials. 2020;533:152106-1-152106-16.
Mechin P, Keryvin V, Grandidier J. Limitations on adding nano-fillers to increase the compressive strength of continuous fibre / epoxy matrix composites. Composites Science and Technology. 2020;192:108099.
Binaisse P, Dehours E, Bodéré C, Chevalier V, Le Fur Bonnabesse A. Dental emergencies at sea: A study in the French maritime TeleMedical Assistance Service. Journal of Telemedicine and Telecare. 2020;26(5):285-293.
Qureshi Y, Tarfaoui M, Benyahia H, K. Lafdi K, Lafdi K. In-situ damage monitoring of composites under dynamic impact using nylon/Ag fiber sensor. 2020;11380
Elain A, Nkounkou C, Le Fellic M, Donnart K. Green extraction of polysaccharides from Arthrospira platensis using high pressure homogenization. Journal of Applied Phycology. 2020;32(3):1719-1727.
Garouge S, Tarfaoui M, Hashim Hassoon O, Minor H, Bendarma A. Effect of stacking sequence on the mechanical performance of the composite structure under slamming impact. 2020;52:29-39.
Faraji J, Abazari A, Babaei M, Muyeen S, Benbouzid M. Day-Ahead Optimization of Prosumer Considering Battery Depreciation and Weather Prediction for Renewable Energy Sources. Applied Sciences. 2020;10(8):2774.
El Garouge S, Tarfaoui M, El Minor H, Bendarma A. The improvement of the physical and mechanical properties of CNTs based composite material. 2020;52:64-70.
Hezzi A, Ben Elghali S, Bensalem Y, Zhou Z, Benbouzid M, Abdelkrim M. ADRC-Based Robust and Resilient Control of a 5-Phase PMSM Driven Electric Vehicle. Machines. 2020..
Sabiri N, Caylet A, Montillet A, Le Coq L, Durkheim Y. Performance of nonwoven geotextiles on soil drainage and filtration. European Journal of Environmental and Civil Engineering. 2020;24(5):670-688.
Chen H, Xie W, Chen X, Han J, Aït-Ahmed N, Zhou Z et al. Fractional-Order PI Control of DFIG-Based Tidal Stream Turbine. Journal of Marine Science and Engineering. 2020;8(5):309.
Boudounit H, Tarfaoui M, Saifaoui D, Nachtane M. Structural analysis of offshore wind turbine blades using finite element method. Wind Engineering. 2020;44(2):168-180.
Saifaoui D, Nachtane M, Tarfaoui M, Rouway M, Aroussy Y. Heat recovery from sulfuric acid plants for seawater desalination using RO and MED systems. Applied Water Science. 2020;10(4):99-1-99-10.
Myslicki S, Kordy H, Kaufmann M, Créac'Hcadec R, Vallée T. Under water glued stud bonding fasteners for offshore structures. International Journal of Adhesion and Adhesives. 2020;98
Keryvin V, Marchandise A, Mechin P, Grandidier J. Determination of the longitudinal non linear elastic behaviour and compressive strength of a CFRP ply by bending tests on laminates. Composites Part B: Engineering. 2020;187:107863.
Ben Othmen K, Haddar N, Jegat A, Manach P, Elleuch K. Ductile fracture of AISI 304L stainless steel sheet in stretching. International Journal of Mechanical Sciences. 2020;172:105404.
Ebrahimnezhad-Khaljiri H, Eslami-Farsani R, Arbab Chirani S. Microcapsulated epoxy resin with nanosilica‐urea formaldehyde composite shell. Journal of Applied Polymer Science. 2020;137(16):48580.
Zizoui M, Tabbache B, Zia M, Benbouzid M. Control of Isolated Photovoltaic-Battery-Ultracapacitor Microgrid for Remote Areas. International Journal on Energy Conversion (IRECON). 2020;8(2):38.
Thomas T, Sudesh K, Bazire A, Elain A, Tan H, Lim H et al. PHA Production and PHA Synthases of the Halophilic Bacterium Halomonas sp. SF2003. Bioengineering. 2020;7(1):29.
Benbouzid M, Amirat Y, Elbouchikhi E. Marine Tidal and Wave Energy Converters. 2020..
Zhou Z, Ben Elghali S, Benbouzid M, Amirat Y, Elbouchikhi E, Feld G. Tidal stream turbine control: An active disturbance rejection control approach. Ocean Engineering. 2020;202:107190.
Hezzi A, Elghali S, Elbouchikhi E, Benbouzid M. Linear ADRC for Speed Control of 5-Phase PMSM-based Electric Vehicles. 2020;1-6.
Alil L, Arrigoni M, Istrate M, Kravcov A, Le Pavic J, Tahan G. Laser Induced Shockwave as Delaminator of Composite Material for Ballistic Protection at High Strain Rate. 2020;15-33.
Delpha C, Harmouche J, Benbouzid M, Amirat Y, El Bouchikhi E, Diallo D. Bearing Fault Diagnosis in Rotating Machines. 2020..
Leveuf L, Navrátil L, Le Saux V, Marco Y, Olhagaray J, Leclercq S. Constitutive equations for the cyclic behaviour of short carbon fibre-reinforced thermoplastics and identification on a uniaxial database. Continuum Mechanics and Thermodynamics. 2020;32(2):403-420.
Amirat Y, El Bouchikhi E, Delpha C, Benbouzid M, Diallo D. Modal Decomposition for Bearing Fault Detection. 2020..
Djebarri S, Charpentier J, Scuiller F, Benbouzid M. Design methodology of permanent magnet generators for fixed-pitch tidal turbines with overspeed power limitation strategy. Journal of Ocean Engineering and Science. 2020;5(1):73-83.
Ahmed H, Benbouzid M. Demodulation type single‐phase PLL with DC offset rejection. Electronics Letters. 2020;56(7):344-347.
van Ruymbeke B, Latrache N, Gabillet C, Colin C. Defect-mediated turbulence in bubbly Taylor-Couette flow. Physical Review Fluids. 2020;5(3):034302.
Bendouma M, Colinart T, Glouannec P, Noël H. Laboratory study on hygrothermal behavior of three external thermal insulation systems. Energy and Buildings. 2020;210:109742.
Cadiou S, Courtois M, Carin M, Berckmans W, Le Masson P. Heat transfer, fluid flow and electromagnetic model of droplets generation and melt pool behaviour for wire arc additive manufacturing. International Journal of Heat and Mass Transfer. 2020;148:119102.
Boy V, Mlayah S, Lemée Y, Lanoiselle J. Impact of jet impingement setup on the drying of food products. 2020..
Ismail A, Saidi L, Sayadi M, Benbouzid M. Remaining useful life estimation for thermally aged power insulated gate bipolar transistors based on a modified maximum likelihood estimator. International Transactions on Electrical Energy Systems. 2020;30(6)
Courtois E, Rogeon P, Desplats H, Carre P, Keryvin V, Berckmans W et al. Experimental highlighting of electric field effects with pulsed and continuous currents during resistance sintering of a silver-based matrix composite Ag-SnO2. International Journal of Advanced Manufacturing Technology. 2020;107(1-2):705-716.
Dia M, Hamila N, Abbas M, Gravouil A. A nine nodes solid-shell finite element with enhanced pinching stress. Computational Mechanics. 2020..
Santharam P, Marco Y, Le Saux V, Le Saux M, Robert G, Raoult I et al. Fatigue criteria for short fiber-reinforced thermoplastic validated over various fiber orientations, load ratios and environmental conditions. International Journal of Fatigue. 2020;135:105574.
Berghout T, Mouss L, Kadri O, Saïdi L, Benbouzid M. Aircraft Engines Remaining Useful Life Prediction with an Improved Online Sequential Extreme Learning Machine. Applied Sciences. 2020;10(3):1062.
Hozhabrossadati S, Challamel N, Rezaiee-Pajand M, Sani A. Free vibration of a nanogrid based on Eringen’s stress gradient model. Mechanics Based Design of Structures and Machines. 2020;50(2):537-555.
Zhang H, Wang C, Challamel N, Pan W. Calibration of Eringen's small length scale coefficient for buckling circular and annular plates via Hencky bar-net model. Applied Mathematical Modelling. 2020;78:399-417.
Roué V, Doudard C, Calloch S, Pujol D’andrebo Q, Corpace F, Guévenoux C. Simulation-based investigation of the reuse of unbroken specimens in a staircase procedure: accuracy of the determination of fatigue properties. International Journal of Fatigue. 2020;131:105288.
Tarfaoui M, Nachtane M, Boudounit H. Finite Element Analysis of Composite Offshore Wind Turbine Blades under Operating Conditions. Journal of Thermal Science and Engineering Applications. 2020;12(1):0110011 (11 pages).
Elbouchikhi E, Feld G, Amirat Y, Benbouzid M, Zhou Z. A Lab-scale Flywheel Energy Storage System: Control Strategy and Domestic Applications. Energies. 2020;13(3):653.
Craipeau T, Jacquet Y, Lecompte T, Toussaint F, Perrot A. Characterization of the shear behavior of mineral suspensions at controlled negative pressure conditions. Powder Technology. 2020;364:60-69.
Galgani F, Bruzaud S, Duflos G, Fabre P, Gastaldi E, Ghiglione J et al. Pollution des océans par les plastiques et les microplastiques. Techniques de l'Ingénieur. 2020;BIO9300.
Pierre T, Courtois M, Carré P, Carin M. Transient infrared thermography to characterise thermal properties of millimetre-sized hemp shiv. Quantitative InfraRed Thermography Journal. 2020;17(1):63-77.
Zaouk L, Masse A, Bourseau P, Taha S, Rabiller-Baudry M, Jubeau S et al. Filterability of exopolysaccharides solutions from the red microalga Porphyridium cruentum by tangential filtration on a polymeric membrane. Environmental Technology. 2020;41(9):1167-1184.
James J, Chandra B, Joseph B, Nancy P, Shaji A, Jose J et al. Nano-optics: Challenges, trends, and future. 2020;19-32.
Le Duigou A, Correa D, Ueda M, Matsuzaki R, Castro M. 3D and 4D printing of natural fibre biocomposites. 2020..
Brachet J, Rouesne E, Ribis J, Guilbert T, Urvoy S, Nony G et al. High temperature steam oxidation of chromium-coated zirconium-based alloys: Kinetics and process. Corrosion Science. 2020..
El-Abbassi F, Assarar M, Ayad R, Bourmaud A, Baley C. A review on alfa fibre (Stipa tenacissima L.): From the plant architecture to the reinforcement of polymer composites. Composites Part A: Applied Science and Manufacturing. 2020;128:105677.
Baho O, Ausias G, Grohens Y, Ferec J. Simulation of laser heating distribution for a thermoplastic composite: effects of AFP head parameters. International Journal of Advanced Manufacturing Technology. 2020;110:2105–2117.
https://link.springer.com/article/10.1007/s00170-020-05876-9
Castro M, Chabaud G, Le Duigou A. 4D printing of composite for morphing purpose. 2020..
Chevillotte Y, Marco Y, Bles G, Devos K, Keryer M, Arhant M et al. Fatigue of improved polyamide mooring ropes for floating wind turbines. Ocean Engineering. 2020;199:107011-1-107011-9.
Chihi M, Tarfaoui M, Qureshi Y, Bouraoui C, Benyahia H. Effect of carbon nanotubes on the in-plane dynamic behavior of a carbon/epoxy composite under high strain rate compression using SHPB. Smart Materials and Structures. 2020;29(8):085012.
Tahan G, Arrigoni M, Bidaud P, Videau L, Thevenet D. Evolution of failure pattern by laser induced shockwave within an adhesive bond. Optics and Laser Technology. 2020;129:106224-1-106224-12.
Le Grognec P, Nême A, Cai J. Investigation of the Torsional Effects on the Lateral Buckling of a Pipe-Like Beam Resting on the Ground under Axial Compression. International Journal of Structural Stability and Dynamics. 2020;20(09):2050110.
Pantaloni D, Bourmaud A, Baley C, Clifford M, Ramage M, Shah D. A Review of Permeability and Flow Simulation for Liquid Composite Moulding of Plant Fibre Composites. Materials. 2020;13(21)
Navrátil L, Leveuf L, Le Saux V, Marco Y, Olhagaray J, Leclercq S et al. A model to describe the cyclic anisotropic mechanical behavior of short fiber-reinforced thermoplastics. Mechanics of Time-Dependent Materials. 2020..
Soum A, Billon L, Bouquey M, Bruzaud S, Duguet E, Schappacher M. Polysilazanes through ring-opening polymerization. 2020;6747-6757.
Le Duigou A, Castro M. Des matériaux inspirés d'une pomme de pin. Sciences Ouest. 2020..
Sun Z, Le Grognec P, Saoud K. Global/local analytical and numerical free vibration analysis of sandwich columns. Composite Structures. 2020;243:112225.
Li Z, Wang T, Wang Y, Amirat Y, Benbouzid M, Diallo D. A Wavelet Threshold Denoising-based Imbalance Fault Detection Method for Marine Current Turbines. IEEE Access. 2020;8:29815-29825.
Vinceslas T, Lecompte T, Hamard E, Hellouin de Ménibus A, Lenormand H, Colinart T. Methods to evaluate earth slip cohesion to build with light earth. Construction and Building Materials. 2020;238:117665.
Jacquet Y, Picandet V, Rangeard D, Perrot A. Gravity induced flow to characterize rheological properties of printable cement‐based materials. RILEM Technical Letters. 2020;5:150-156.
Lerbet J, Challamel N, Nicot F, Darve F. Stability of Discrete Non-conservative Systems. 2020;i-iii.
Khammassi S, Tarfaoui M. Influence of exfoliated graphite filler size on the electrical, thermal, and mechanical polymer properties. Journal of Composite Materials. 2020;54(25):3731-3741.
Thiébaut M, Filipot J, Maisondieu C, Damblans G, Jochum C, Kilcher L et al. Characterization of the vertical evolution of the three-dimensional turbulence for fatigue design of tidal turbines. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2020;378(2178):20190495.
Girard M, Péron M, Uguen A, Casari P, Jacquemin F. A simple characterization methodology for the identification of the visco-elastic behavior of thermoset adhesives during cure. Applied Adhesion Science. 2020;8:2.
Djeumen E, Chataigner S, Créac'Hcadec R, Sourisseau Q, Quemere M, Court J et al. Creep investigations on adhesively bonded fasteners developed for offshore steel structures. Marine Structures. 2020;69:14 p.
Wyttenbach A, Mollière P, Ehrenreich D, Cegla H, Bourrier V, Lovis C et al. Mass-loss rate and local thermodynamic state of the KELT-9 b thermosphere from the hydrogen Balmer series★. Astronomy & Astrophysics - A&A. 2020;638:A87.
Mayer-Laigle C, Bourmaud A, Shah D, Follain N, Beaugrand J. Unravelling the consequences of ultra-fine milling on physical and chemical characteristics of flax fibres. Powder Technology. 2020;360:129-140.
Farzan H, Sarvari S, Loulou T. Application of Noise Reduction Technique in the Inverse Analysis Using Kalman Filter. Heat Transfer Engineering. 2020;41(13):1174-1188.
Guillou N, Charpentier J, Benbouzid M. The Tidal Stream Energy Resource of the Fromveur Strait—A Review. Journal of Marine Science and Engineering. 2020;8(12):1037.
Shubina Helbert V, Gaillet L, Chaussadent T, Gaudefroy V, Creus J. Rhamnolipids as an eco-friendly corrosion inhibitor of rebars in simulated concrete pore solution: evaluation of conditioning and addition methods. Corrosion Engineering, Science and Technology. 2020;55(2):91-102.
Al Habis N, El Moumen A, Tarfaoui M, Lafdi K. Mechanical properties of carbon black/poly (ε-caprolactone)-based tissue scaffolds. Arabian Journal of Chemistry. 2020;13(1):3210-3217.
Joseph B, James J, Grohens Y, Kalarikkal N, Thomas S. Material aspects during additive manufacturing of nano-cellulose composites. 2020;409-428.
Pai A, Binumol T, Ambika Gopakumar D, Pasquini D, Seantier B, Kalarikkal N et al. Ultra-fast heat dissipating aerogels derived from polyaniline anchored cellulose nanofibers as sustainable microwave absorbers. Carbohydrate Polymers. 2020;246:1-14/116663.
Laiarinandrasana L, Morgeneyer T, Cheng Y, Helfen L, Le Saux V, Marco Y. Microstructural observations supporting thermography measurements for short glass fibre thermoplastic composites under fatigue loading. Continuum Mechanics and Thermodynamics. 2020;32:451–469.
Zia M, Benbouzid M, Elbouchikhi E, Muyeen S, Techato K, Guerrero J. Microgrid Transactive Energy: Review, Architectures, Distributed Ledger Technologies, and Market Analysis. IEEE Access. 2020;8:19410-19432.
Onimus F, Bono M, Verhaeghe B, Soniak A, Pilvin P. Polycrystalline modeling of the behavior of neutron-irradiated recrystallized zirconium alloys during strain path change tests. International Journal of Plasticity. 2020;134:102835.
Megdiche M, Sallami A, Thiebaud F, Bouraoui T, Ben Zineb T, Arbab-Chirani S. Experimental analysis of the pseudoelastic damping capacity of the Fe-30Mn-6Si-5Cr Shape Memory Alloy. Smart Materials and Structures. 2020;29(8):084002.
Ahmed H, Benbouzid M, Ahsan M, Albarbar A, Shahjalal M. Frequency Adaptive Parameter Estimation of Unbalanced and Distorted Power Grid. IEEE Access. 2020;8:8512-8519.
Trenvouez G, Guin J, Keryvin V, Bernard C. Comment on “elastic-plastic deformation in ion-exchanged aluminosilicate glass by loading rate dependent nanoindentation”. Journal of Non-Crystalline Solids. 2020;528:119692.
Jacquet Y, Rangeard D, Courteille E, Sonebi M, Perrot A. Nailing of layers A promisingway to reinforce concrete 3D printing structures. Materials. 2020;13(7):1518.
Dumont V, Badulescu C, Stamoulis G, Adrien J, Maire E, Lefèvre A et al. On the effect of the curing cycle on the creation of pores in structural adhesive joints by means of X-ray microtomography. The Journal of Adhesion. 2020..
Dumont V, Badulescu C, Stamoulis G, Adrien J, Maire E, Lefèvre A et al. On the influence of mechanical loadings on the porosities of structural epoxy adhesives joints by means of in-situ X-ray microtomography. International Journal of Adhesion and Adhesives. 2020;99:102568-1-102568-14.
Giraud L, Pouvreau C, Josse F, Berckmans W, Lefebvre F, Carrillo C et al. A multi-phase linear kinematic elastoplastic model for the HAZ of welded S355J2 steel under low-cycle fatigue. Comptes Rendus. Mécanique. 2020;348(3):175-190.
Le Mézo T, Le Maillot G, Ropert T, Jaulin L, Ponte A, Zerr B. Design and control of a low-cost autonomous profiling float. Mechanics & Industry. 2020;21(5):512.
Benchikh L, Merzouki A, Grohens Y, Pellin I. EXTRUDED POLY(ETHYLENE-CO-VINYL ALCOHOL) COMPOSITE FILMS REINFORCED WITH CELLULOSIC FIBERS ISOLATED FROM TWO LOCAL ABUNDONATES PLANTS. Journal of Fundamental and Applied Sciences = Revue des sciences fondamentales et appliquées. 2020;12(1):49-72.
Ahmed H, Ahsan M, Benbouzid M, Albarbar A, Shahjalal M, Biricik S. Coordinate Transformation-Free Observer-Based Adaptive Estimation of Distorted Single-Phase Grid Voltage Signal. IEEE Access. 2020;8:74280-74290.
Colinart T, Vinceslas T, Lenormand H, Hellouin de Menibus A, Hamard E, Lecompte T. Hygrothermal properties of light-earth building materials. Journal of Building Engineering. 2020;29:101134.
Carteron L, Doudard C, Calloch S, Levieil B, Beaudet J, Bridier F. Naval welded joints local stress assessment and fatigue cracks monitoring with quantitative thermoelastic stress analysis. Theoretical and Applied Fracture Mechanics. 2020;110:102792.
Destouesse J, Diakhate M, Badulescu C, Thevenet D, Stackler M, Albouy W et al. Cluster analysis of acoustic emission data to investigate the damage evolution in modified scarf joint under bi-axial loading. The Journal of Adhesion. 2020;96(11):969-987.
Boudina R, Wang J, Benbouzid M, Khoucha F, Boudour M. Impact evaluation of large scale integration of electric vehicles on power grid. Frontiers in Energy. 2020;14(2):337-346.
Musa C, Kervoelen A, Danjou P, Bourmaud A, Delattre F. Bio-based unidirectional composite made of flax fibre and isosorbide-based epoxy resin. Materials Letters. 2020;258:126818.
Lerbet J, Challamel N, Nicot F, Darve F. Second-order work criterion and divergence criterion: a full equivalence for kinematically constrained systems. Mathematics and Mechanics of Complex Systems. 2020;8(1):1-28.
Berger J, Colinart T, Loiola B, Orlande H. Parameter estimation and model selection for water sorption in a wood fibre material. Wood Science and Technology. 2020;54(6):1423-1446.
Kedzierski M, Soccalingame L, Palazot M, Bruzaud S. Pollution des environnements terrestres et marins par les plastiques : sources, impacts et solutions. L'Actualité Chimique. 2020..
Lauzet N, Rodler A, Musy M, Azam M, Guernouti S, Mauree D et al. How building energy models take the local climate into account in an urban context – A review. Renewable and Sustainable Energy Reviews. 2019;116:109390.
Challamel N, Elishakoff I. A brief history of first-order shear-deformable beam and plate models. Mechanics Research Communications. 2019;102:103389.
Robert C, Pillin I, Feller J, Castro M. Multifunctional Carbon Nanotubes Enhanced Structural Composites with Improved Toughness and Damage Monitoring. Journal of Composites Science. 2019;3(4):109.
Arbaoui Y, Gingat R, Agaciak P, Pen A, Palessonga D, Martinez-Cano L et al. 3D printed microwave absorbers : Towards innovative structures and concepts. 2019..
Jabeur R, Corbel C, Le Grand A, Duval H, Loyer P, Comte A et al. Etat de phosphorylation du récepteur aux œstrogènes : implication du complexe CDK5/p25 ? 2019..
Nachtane M, Tarfaoui M, Saifaoui D, Rouway M. Hydrodynamic performance evaluation of a new hydrofoil design for marine current turbines. 2019;30:889-898.
Aghmadi A, Hani S, Elbouchikhi E, Naseri N, Harouri K. Prediction Global Solar Radiation Using ANN Model Based on Meteorological Data in Morocco. 2019;50-54.
Ouyang Z, Bertevas E, Parc L, Khoo B, Phan-Thien N, Férec J et al. A smoothed particle hydrodynamics simulation of fiber-filled composites in a non-isothermal three-dimensional printing process. Physics of Fluids. 2019;31(12):123102.
El Malki Alaoui A, Elhimer M, Jacques N, Gabillet C. On the influence of aeration on water entry problems: experiments and simulations. La Houille Blanche - Revue internationale de l'eau. 2019;2019(5-6):74-80.
https://www.shf-lhb.org/fr/articles/lhb/abs/2019/04/lhb170013/lhb170013.html
Behrel M, Roncin K, Grelon D, Montel F, Nême A, Leroux J et al. Performance measurement of a 50-square-meter kite set-up on a 13-meter trawler. La Houille Blanche - Revue internationale de l'eau. 2019;2019(5-6):67-69.
Levieil B, Doudard C, Thevenet D, Bridier F, Ezanno A, Calloch S. An original simplified method based on the use of an adjustable localization operator for low-cycle fatigue life predictions in the case of confined plasticity. Theoretical and Applied Fracture Mechanics. 2019;104:102383.
Guillou R, Le Saux M, Rouesne E, Hamon D, Toffolon-Masclet C, Menut D et al. In-situ time-resolved study of structural evolutions in a zirconium alloy during high temperature oxidation and cooling. Materials Characterization. 2019;158
Ahmed H, Pay M, Benbouzid M, Amirat Y, Elbouchikhi E. Hybrid estimator-based harmonic robust grid synchronization technique. Electric Power Systems Research. 2019;177:106013.
Krichen M, Chaieb M, Elbouchikhi E, Hadj N, Benbouzid M, Neji R. Eccentricity Faults Diagnosis in Permanent Magnet Synchronous Motors: a Finite Element-Based Approach. International Journal on Energy Conversion (IRECON). 2019;7(6):207.
de Quelen F, Bertin P, Dourmad J, Dubois S, Jardé E, Keïta A et al. Le GIS « APIVALE » pour une approche intégrée des filières de valorisation des effluents organiques. 2019..
Arbaoui Y, Agaciak P, Chevalier A, Laur V, Azar M, Ville J et al. 3D printed ferromagnetic composites for microwave applications. 2019..
Cochet J, Thuillier S, Decultot N, Manach P. Investigation of the key process parameters in the hot forming of a shackle. International Journal of Advanced Manufacturing Technology. 2019;105(7-8):3209-3219.
Melelli A, Arnould O, Roselli G, Di Girolami G, Jamme F, Beaugrand J et al. Investigation of flax yarns from italian paintings using AFM mechanical characterization. 2019..
http://lmp-conference.cz/
Komini Babu S, Spernjak D, Dillet J, Lamibrac A, Maranzana G, Didierjean S et al. Spatially resolved degradation during startup and shutdown in polymer electrolyte membrane fuel cell operation. Applied Energy. 2019;254:113659.
Kedzierski M, Falcou-Préfol M, Kerros M, Henry M, Pedrotti M, Bruzaud S. A machine learning algorithm for high throughput identification of FTIR spectra: Application on microplastics collected in the Mediterranean Sea. Chemosphere. 2019;234:242-251.
Zia M, Elbouchikhi E, Benbouzid M, Guerrero J. Energy Management System for an Islanded Microgrid With Convex Relaxation. IEEE Transactions on Industry Applications. 2019;55(6):7175-7185.
Martins J, Andrade-Campos A, Thuillier S. Calibration of anisotropic plasticity models using a biaxial test and the virtual fields method. International Journal of Solids and Structures. 2019;172:21-37.
van Baarsel T, Roux P, Mars J, Bonnel J, Arrigoni M, Kerampran S et al. Dynamic imaging of a capillary-gravity wave in shallow water using amplitude variations of eigenbeams. Journal of the Acoustical Society of America. 2019;146(5):3353-3361.
Sire S, Ragueneau M. Fatigue design of metallic railway bridges in France at the end of the nineteenth century. Proceedings of the Institution of Civil Engineers (ICE). Forensic Engineering. 2019;172(4):167-174.
Mezi D, Ausias G, Grohens Y, Férec J. Numerical simulation and modeling of the die swell for fiber suspension flows. Journal of Non-Newtonian Fluid Mechanics. 2019;104205.
Anty R, Morvan M, Le Corvec M, Canivet C, Patouraux S, Gugenheim J et al. The mid-infrared spectroscopy: A novel non-invasive diagnostic tool for NASH diagnosis in severe obesity. JHEP Reports Innovation in Hepatology. 2019;1(5):361-368.
Baley C, Gomina M, Breard J, Bourmaud A, Davies P. Variability of mechanical properties of flax fibres for composite reinforcement. A review. Industrial Crops and Products. 2019;145:111984.
Hascoët R, Jacques N, Scolan Y, Tassin A. A two-dimensional analytical model of vertical water entry for asymmetric bodies with flow separation. Applied Ocean Research. 2019;92:101878.
Even A, Vignaud G, Guitter N, Le Bozec N, Tingaut P, Grohens Y. Influence of radical photoinitiator content on UV curing process and UV-cured hybrid sol–gel films. Journal of Coatings Technology and Research. 2019;17(2):333-343.
Picandet V, Challamel N. Nonlocality of one-dimensional bilinear hardening–softening elastoplastic axial lattices. Mathematics and Mechanics of Solids. 2019;25(2):475-497.
Struyven F, Mandin P, Sellier M, Sauvage T. Étude des écoulements biphasiques et microfluidiques électrogénérés. 2019..
Le Duigou A, Barbé A, Guillou E, Castro M. 3D printing of continuous flax fibre reinforced biocomposites for structural applications. Materials & Design. 2019;180:107884.
Struyven F, Mandin P, Sellier M, Lanoiselle J. Étude des écoulements bi-phasiques et microuidiques électrogénérés. 2019..
Fagundes Gasparoto H, Chocron O, Benbouzid M, Siqueira Meirelles P. Design of an Optimally Stiff Axial Magnetic Coupling for Compliant Actuators. 2019;9(2):5198-5203.
Saidi L, Benbouzid M, Diallo D, Amirat Y, Elbouchikhi E, Wang T. PMSG-based Tidal Current Turbine Biofouling Diagnosis using Stator Current Bispectrum Analysis. 2019;6998-7003.
Ouchen S, Steinhart H, Blaabjerg F, Benbouzid M, Betka A, Gaubert J. Performance Analysis of Direct Power Control with Space Vector Modulation for Shunt Active Power Filter. 2019;467--472.
Al Kotob M, Combescure C, Mazière M, Rose T, Forest S. A general and efficient multi‐start algorithm for the detection of loss of ellipticity in elastoplastic structures. International Journal for Numerical Methods in Engineering. 2019..
Mohammadzadeh M, Kadkhodaei M, Barati M, Arbab Chirani S, Saint-Sulpice L. Modeling of torsion fatigue in shape memory alloys. Journal of Intelligent Material Systems and Structures. 2019;30(20):3146-3162.
El Moumen A, Tarfaoui M, Lafdi K. Modelling of the temperature and residual stress fields during 3D printing of polymer composites. International Journal of Advanced Manufacturing Technology. 2019;104(5-8):1661-1676.
Lacondemine T, Réthoré J, Maire E, Célarié F, Houizot P, Roux-Langlois C et al. Direct observation of the displacement field and microcracking in a glass by means of X-ray tomography during in situ Vickers indentation experiment. Acta Materialia. 2019;179:424-433.
Lamien B, Le Maux D, Courtois M, Pierre T, Carin M, Le Masson P et al. A Bayesian approach for the estimation of the thermal diffusivity of aerodynamically levitated solid metals at high temperatures. International Journal of Heat and Mass Transfer. 2019;141:265-281.
Sassi S, Tarfaoui M, Nachtane M, Ben Yahia H. Strain rate effects on the dynamic compressive response and the failure behavior of polyester matrix. Composites Part B: Engineering. 2019;174:UNSP 107040.
Gager V, Le Duigou A, Bourmaud A, Pierre F, Behlouli K, Baley C. Understanding the effect of moisture variation on the hygromechanical properties of porosity-controlled nonwoven biocomposites. Polymer Testing. 2019;78:105944.
Sanchez-Soriano M, Allanic R, Le Saux V, Bouazzaoui H, Manchec A, Quendo C. Self-Heating Study on a First Order Filter with Discrete and Continuous Tuning. 2019..
Remaud M, Guilcher P, Leroux J, Laurens J. Design of ducted propellers. 2019..
Ganci F, Baguet T, Aiello G, Cusumano V, Mandin P, Sunseri C et al. Nanostructured Ni Based Anode and Cathode for Alkaline Water Electrolyzers. Energies. 2019;12(19):3669.
Kassa A, Benhamida A, Kaci M, Bruzaud S. Effects of montmorillonite, sepiolite, and halloysite clays on the morphology and properties of polycaprolactone bionanocomposites. Polymers and Polymer Composites. 2019;28(5):338-347.
Zia M, Elbouchikhi E, Benbouzid M. An Energy Management System for Hybrid Energy Sources-based Stand-alone Marine Microgrid. IOP Conference Series: Earth and Environmental Science. 2019;322:012001.
Mansouri L, Coër J, Thuillier S, Laurent H, Manach P. Investigation of Portevin-Le Châtelier effect during Erichsen test. International Journal of Material Forming. 2019;13(5):687-697.
Asagabaldan M, Bourgougnon N, Bedoux G, Kristiana R, Ayuningrum D, Widyananto P et al. Some Cheilostomata (Bryozoa) from the Java Sea, central Indonesian Archipelago, with a description of Pleurocodonellina jeparaensis n. sp. (Smittinidae). Zootaxa. 2019;4668(3):329-342.
Réquilé S, Le Duigou A, Bourmaud A, Baley C. Interfacial properties of hemp fiber/epoxy system measured by microdroplet test: Effect of relative humidity. Composites Science and Technology. 2019;181:107694.
Lauzet N, Mauree D, Colinart T, Musy M, Lapray K. Bioclimatic building design considering urban microclimate. 2019..
Mandin P, Le Marre M. Smart microturbining using pump. 2019..
Jung A, Al Majthoub K, Jochum C, Kirsch S, Welsch F, Seelecke S et al. Correlative digital image correlation and infrared thermography measurements for the investigation of the mesoscopic deformation behaviour of foams. Journal of the Mechanics and Physics of Solids. 2019;130:165-180.
Toumi S, Elbouchikhi E, Amirat Y, Benbouzid M, Feld G. Magnet failure-resilient control of a direct-drive tidal turbine. Ocean Engineering. 2019;187:106207.
Nachtane M, Tarfaoui M, Sassi S, El Moumen A, Saifaoui D. An investigation of hygrothermal aging effects on high strain rate behaviour of adhesively bonded composite joints. Composites Part B: Engineering. 2019;172:111-120.
Bourmaud A, Merotte J, Siniscalco D, Le Gall M, Gager V, Le Duigou A et al. Main criteria of sustainable natural fibre for efficient unidirectional biocomposites. Composites Part A: Applied Science and Manufacturing. 2019;124:105504.
https://www.sciencedirect.com/journal/composites-part-a-applied-science-and-manufacturing
Hebbaz M, Kerboua B, Tarfaoui M, Belabed Y, Bensaid I. Strengthening of Damaged Metallic Structures: A New Numerical Model for Interfacial Stresses Analysis. Defect and Diffusion Forum. 2019;397:13-23.
Réquilé S, Le Duigou A, Bourmaud A, Baley C. Deeper insights into the moisture-induced hygroscopic and mechanical properties of hemp reinforced biocomposites. Composites Part A: Applied Science and Manufacturing. 2019;123:278-285.
Lerbet J, Challamel N, Nicot F, Darve F. Intrinsic Incremental Mechanics. 2019;11712:51-54.
https://www.see.asso.fr/en/GSI2019
Djeumen E, Sourisseau Q, Chataigner S, Créac'Hcadec R, Quemere M, Court J et al. Creep investigations on steel fasteners adhesively bonded to steel plates. 2019;15p.
https://cfm2019.sciencesconf.org/
Hin R, Cheng K, Han V, Bernard F, Seang C, Keryvin V et al. Flexural strength improvement for structural glass A numerical study. 2019;849(1):012083.
Han Z, Chaise T, Mauger C, Elguedj T, Arrigoni M, El Hajem M et al. Mesure par PVDF de l'implosion d'une bulle générée par focalisation laser. 2019..
El Moumen A, Tarfaoui M, Lafdi K. Additive manufacturing of polymer composites: Processing and modeling approaches. Composites Part B: Engineering. 2019;171:166-182.
Sanchez-Soriano M, Quéré Y, Le Saux V, Marini S, Reglero M, Boria V et al. Peak and Average Power Handling Capability of Microstrip Filters. IEEE Transactions on Microwave Theory and Techniques. 2019;67(8):3436-3448.
Qureshi Y, Tarfaoui M, Lafdi K. Real-time strain monitoring performance of flexible Nylon/Ag conductive fiber. Sensors and Actuators A: Physical. 2019;295:612-622.
Legendre J, Créac'Hcadec R, Tanguy A, Hallais S, Schmitt J, Héripré E et al. A unique combination of in-situ and multi-scale methodologies to analyze damage mechanisms of temper rolled zinc coating. Materials Science and Engineering: A. 2019;763:138156.
Elbouchikhi E, Amirat Y, Feld G, Benbouzid M. Generalized Likelihood Ratio Test Based Approach for Stator-Fault Detection in a PWM Inverter-Fed Induction Motor Drive. IEEE Transactions on Industrial Electronics. 2019;66(8):6343-6353.
Bedon C, Arrigoni M, Santos F, Figuli L. Advancements in Design and Analysis of Protective Structures 2019. Advances in Civil Engineering. 2019;2019:2450561.
Aït Hocine N, Médéric P, Hassan H. Influence of mixing energy on the solid-state behavior and clay fraction threshold of PA12/C30B ® nanocomposites. Journal of Polymer Engineering. 2019;39(6):565-572.
Beaugrand J, Foucat L, Falourd X, Arnould O, Baley C, Bourmaud A. Cell Wall Ultrastructure Modifications During Flax Fiber Retting. 2019..
https://cellwall2019.org/
Kedzierski M. Mitigating EPS impact. 2019..
Kedzierski M, Le Maguer G, Bruzaud S. The OceanWise European project. 2019..
Jabeur R, Corbel C, Le Grand A, Arnaud C, Duval H, Le Tilly V et al. Cancer du sein hormono-dépendant : alternatives thérapeutiques. 2019..
Liu X, Lendormi T, Le Fellic M, Lemée Y, Lanoisellé J. Hygienization of mixed animal by-product using Pulsed Electric Field: Inactivation kinetics modeling and recovery of indicator bacteria. Chemical Engineering Journal. 2019;368:1-9.
Beaugrand J, Bourmaud A, Foucat L, Falourd X, Arnould O, Baley C. Flax Cell Wall Ultrastructure Modifications During Retting. 2019..
https://www.icnf2019.fibrenamics.com/
Oulmi K, Haddad D, Mehras H, Boussad E, Mahmoud B, Zerdoumi R et al. The catalytic mechanism in chronoamperometry at planar electrodes: Theory, simulation and organic application. 2019..
Nuez L, Bourmaud A, Mayer-Laigle C, Beaugrand J, Shah D, d'Arras P et al. Valorisation d'anas de lin comme renforts de biocomposites. 2019..
Hassoon O, Tarfaoui M, El Moumen A, Qureshi Y, Ben Yahia H, Nachtane M. Mechanical performance evaluation of sandwich panels exposed to slamming impacts: Comparison between experimental and SPH results. Composite Structures. 2019;220:776-783.
Kedzierski M, Le Maguer G, Bruzaud S. The OceanWise European project: Mitigatinig EPS impact. 2019..
Azoti W, Jmal H, Francart C, Bahlouli N, Bourmaud A, Kervoelen A et al. Propriétés thermomécaniques et comportement élasto-(visco) plastique des matériaux composites bio-sourcés. 2019..
Gager V, Le Duigou A, Bourmaud A, Pierre F, Behlouli K, Baley C. Comportement hygromécanique des biocomposites non-tissés soumis à des variations d'humidité. 2019..
Mazhoud B, Perrot A, Picandet V, Rangeard D, Courteille E. Underwater 3D printing of cement-based mortar. Construction and Building Materials. 2019;214:458-467.
Vinceslas T, Colinart T, Lenormand H, Hellouin de Menibus A, Hamard E, Lecompte T. Hygrothermal properties of light earth insulation materials: evaluation of uncertainties and consequences. 2019..
Vinceslas T, Lecompte T, Lenormand H, Hellouin de Menibus A, Hamard E, Colinart T. Towards field-oriented tests to evaluate the workability and cohesion of earth slips for building applications. 2019..
Warneboldt I, Szmytka F, Raoult I, Marco Y, Le Saux V, Charrier P et al. Multiaxial fatigue under complex non-relaxing loads. 2019;XI
Balutch T, Huneau B, Marco Y, Charrier P, Champy C. Influence of defects size on the fatigue properties of an industrial EPDM. 2019..
Donnard A, Guerard S, Viot P, Maheo L, Rio G. Hyperelastic modelling of polypropylene foam under complex loadings. 2019;300-304.
Thomas T, Lemechko P, Le Fellic M, Elain A, Bazire A, Bruzaud S. 1ères Journées annuelles du GdR Polymères et Océans. 2019..
Ploteau J, Noel H, Fuentes A, Glouannec P, Louarn S. Sludge convection drying process: Numerical modeling of a heat pump assisted continuous dryer. Drying Technology. 2019;38(10):1261-1273.
Zembouai I, Chikh A, Kaci M, Bruzaud S. 7th international conference on Biobased and biodegradable polymers. 2019..
Wolf J, Longère P, Crété J, Cadou J. Strain localization in ductile materials: Assessment of three X-FEM-based enrichment methods. Mechanics Research Communications. 2019;99:1-7.
Huneau B, Le Cam J, Marco Y, Verron E. Constitutive Models for Rubber XI. 2019..
Ramakrishnan K, Guérard S, Mahéo L, Shankar K, Viot P. A new method for the study of parabolic impact of foam-core sandwich panels. Composites Part B: Engineering. 2019;167:717-727.
Mostofizadeh P, Kadkhodaei M, Arbab-Chirani S, Saint-Sulpice L, Rokbani M, Bouraoui T et al. Fatigue analysis of shape memory alloys by self-heating method. International Journal of Mechanical Sciences. 2019;156:329-341.
Mostofizadeh P, Kadkhodaei M, Arbab Chirani S, Saint-Sulpice L, Rokbani M, Bouraoui T et al. Fatigue analysis of shape memory alloys by self-heating method. International Journal of Mechanical Sciences. 2019;156:329-341.
Tarfaoui M, Nachtane M, El Moumen A. Energy dissipation of stitched and unstitched woven composite materials during dynamic compression test. Composites Part B: Engineering. 2019;167:487-496.
Remaud M, Guilcher P, Laurens J. Preliminary parameter characterization for numerical optimization of ducted propellers. Maritime Technology Research. 2019..
Aquino J, Andrade-Campos A, Martins J, Thuillier S. Design of heterogeneous mechanical tests: Numerical methodology and experimental validation. Strain. 2019;55(4)
Chevalier A, Potelon B, Benedicto J, Quendo C, Roquefort P, Aubry T et al. Caractérisation électromagnétique hyperfréquence de marqueur physiologique : application au Lactate de sodium. 2019..
Palessonga D, Roquefort P, Houssein H, Azar M, Chevalier A, Ville J et al. Développement d'un composite imprimable haute température pour des applications d'absorption hyperfréquence. 2019..
Le Meitour H, Rio G, Laurent H, Lectez A, Guigue P, Gouazé M et al. Simulation du gonflement des ballons stratosphériques. 2019..
Alves Zapata J, Acevedo-Rigueras S, Marie S, Rogeon P, Bay F, Adams B. Electrically assisted forming simulation solutions with FORGE®. 2019..
Thuillier S, Andrade-Campos A, Carlone P, Valente R, de Sousa R. Integrated design in welding and incremental forming: Mechanical behavior of friction stir welded blanks. 2019;060010.
Herault D, Thuillier S, Manach P. Strain path change influence on residual stress after deep drawing. 2019;060002.
Doyen O, Gloannec B, Deschamps A, Geuser F, Pouvreau C, Poulon-Quintin A. Ferritic and martensitic ODS steel resistance upset welding of fuel claddings: Weldability assessment and metallurgical effects. Journal of Nuclear Materials. 2019;518:326-333.
Ito A, Myriokefalitakis S, Kanakidou M, Mahowald N, Scanza R, Hamilton D et al. Pyrogenic iron: The missing link to high iron solubility in aerosols. Science Advances. 2019;5(5):eaau7671.
Tarfaoui M, Shah O, Nachtane M. Design and Optimization of Composite Offshore Wind Turbine Blades. Journal of Energy Resources Technology. 2019;141(5):051204.
El Moumen A, Tarfaoui M, Nachtane M, Lafdi K. Carbon nanotubes as a player to improve mechanical shock wave absorption. Composites Part B: Engineering. 2019;164:67-71.
Lemechko P, Le Fellic M, Bruzaud S. Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) using agro-industrial effluents with tunable proportion of 3-hydroxyvalerate monomer units. International Journal of Biological Macromolecules. 2019;128:429-434.
Ezzine M, Madani K, Tarfaoui M, Touzain S, Mallarino S. Comparative study of the resistance of bonded, riveted and hybrid assemblies; Experimental and numerical analyses. Structural Engineering and Mechanics. 2019;70(4):467-477.
Luo S, Castany P, Thuillier S. Microstructure, thermo-mechanical properties and Portevin-Le Chatelier effect in metastable β Ti-xMo alloys. Materials Science and Engineering: A. 2019;756:61-70.
Deroiné M, Pillin I, Le Maguer G, Chauvel M, Grohens Y. Development of new generation fishing gear: A resistant and biodegradable monofilament. Polymer Testing. 2019;74:163-169.
Challamel N, Zhang H, Wang C, Kaplunov J. Scale effect and higher-order boundary conditions for generalized lattices, with direct and indirect interactions. Mechanics Research Communications. 2019;97:1-7.
Boodi A, Beddiar K, Amirat Y, Benbouzid M. A Numerical Approach for Buildings Reduced Thermal Model Parameters Evaluation. 2019;322(1):012015.
Chikh A, Zembouai I, Kaci M, Bruzaud S. Eurofillers-polymer blends. 2019..
Mertani B, Keskes B, Tarfaoui M. Numerical study on the compressive behaviour of an aluminium honeycomb core. Materiali in tehnologije. 2019;53(2):199-206.
Sellier M, Taylor J, Bertram A, Mandin P. Models for the bead mobility technique: A droplet-based viscometer. Aerosol Science and Technology. 2019;53(7):749-759.
James J, Nancy P, Vignaud G, Grohens Y, Thomas S, Kalarikkal N. Laser Assisted Synthesis of Graphene Quantum Dots for Multifunctional Applications. 2019;2100
Gueguen Y, Dergal A, Rahmoun K, Keryvin V, Bureau B, Lucas P et al. Optically trapped delayed elasticity in germanium selenide glass fibers. International Journal of Applied Glass Science. 2019;10(2):235-247.
Nachtane M, Tarfaoui M, El Moumen A, Saifaoui D, Ben Yahia H. Design and Hydrodynamic Performance of a Horizontal Axis Hydrokinetic Turbine. International Journal of Automotive and Mechanical Engineering. 2019;16(2):6453-6469.
journal.ump.edu.my/
Gédouin P, Pino L, Arbab-Chirani S, Calloch S, Delaleau E, Bourgeot J. R-phase shape memory alloy helical spring based actuators: Modeling and experiments. Sensors and Actuators A: Physical. 2019;289:65-76.
El Harouri K, El Hani S, Elbouchikhi E, Benbouzid M, Mediouni H. Grid-Connected Plug-in Electric Vehicles Charging Stations Energy Management and Control. International Journal on Energy Conversion (IRECON). 2019;7(2):49.
Bennici S, Jeguirim M, Limousy L, Haddad K, Vaulot C, Michelin L et al. Influence of CO2 Concentration and Inorganic Species on the Gasification of Lignocellulosic Biomass Derived Chars. Waste and Biomass Valorization. 2019..
Rokbani M, Saint-Sulpice L, Arbab-Chirani S, Bouraoui T. The Effect of Surface Treatment on the Fatigue Behavior of NiTi Alloys. 2019;699-706.
Vinceslas T, Colinart T, Hamard E, Hellouin de Ménibus A, Lecompte T, Lenormand H. Light Earth Performances For Thermal Insulation: Application To Earth–Hemp. 2019;357-367.
Thomas T, Elain A, Bazire A, Bruzaud S. Complete genome sequence of the halophilic PHA-producing bacterium Halomonas sp. SF2003: insights into its biotechnological potential. World Journal of Microbiology and Biotechnology. 2019;35(3)
Mertani B, Keskes B, Tarfaoui M. Experimental Analysis of the Crushing of Honeycomb Cores Under Compression. Journal of Materials Engineering and Performance. 2019;28(3):1628–1638.
Parameswaranpillai J, Sanjay M, Varghese S, Siengchin S, Jose S, Salim N et al. Toughened PS/LDPE/SEBS/xGnP ternary composites: morphology, mechanical and viscoelastic properties. International Journal of Lightweight Materials and Manufacture. 2019;2(1):64-71.
Colinart T, Bendouma M, Glouannec P. Building renovation with prefabricated ventilated façade element: A case study. Energy and Buildings. 2019;186:221-229.
El Moumen A, Tarfaoui M, Ben Yahia H, Lafdi K. Mechanical behavior of carbon nanotubes-based polymer composites under impact tests. Journal of Composite Materials. 2019;53(7):925-940.
Le Pavic J, Stamoulis G, Bonnemains T, da Silva D, Thevenet D. Fast failure prediction of adhesively bonded structures using a coupled stress-energetic failure criterion. Fatigue and Fracture of Engineering Materials and Structures. 2019;42(3):627-639.
Nsom B, Ramifidisoa L, Latrache N, Ghaemizadeh F. Linear stability of shear-thinning fluid down an inclined plane. Journal of Molecular Liquids. 2019;277:1036-1046.
Simões V, Oliveira M, Laurent H, Menezes L. The punch speed influence on warm forming and springback of two Al-Mg-Si alloys. Journal of Manufacturing Processes. 2019;38:266-278.
Myslicki S, Vallée T, Bletz-Mühldorfer O, Diehl F, Lavarec L, Créac'Hcadec R. Fracture mechanics based joint capacity prediction of glued-in rods with beech laminated veneer lumber. The Journal of Adhesion. 2019;95(5-7):405-424.
Elishakoff I, Hache F, Challamel N. Critical Comparison of Bresse–Timoshenko Beam Theories for Parametric Instability in the Presence of Pulsating Load. International Journal of Structural Stability and Dynamics. 2019;19(02):1950006.
Belabed Y, Kerboua B, Tarfaoui M. New Optimized Numerical Solution of Interfacial Stresses in Steel Strengthened Structures with CFRP. Advances in Civil Engineering Materials. 2019;8(1):117-133.
Choqueuse V, Granjon P, Belouchrani A, Auger F, Benbouzid M. Monitoring of Three-Phase Signals based on Singular-Value Decomposition. IEEE Transactions on Smart Grid. 2019;10(6):6156-6166.
James J, Unni A, Taleb K, Chapel J, Kalarikkal N, Varghese S et al. Surface engineering of polystyrene–cerium oxide nanocomposite thin films for refractive index enhancement. Nano-Structures & Nano-Objects. 2019;17:34-42.
Vignaud G, Gibaud A. REFLEX : a program for the analysis of specular X-ray and neutron reflectivity data. Journal of Applied Crystallography. 2019;52(1):201-213.
Dahou T, Dutournié P, Limousy L, Bennici S, Perea N. Recovery of Low-Grade Heat (Heat Waste) from a Cogeneration Unit for Woodchips Drying: Energy and Economic Analyses. Energies. 2019;12(3):501.
Goudenhooft C, Almeras T, Bourmaud A, Baley C. The remarkable slenderness of flax plant and pertinent factors affecting its mechanical stability. Biosystems Engineering. 2019;178:1-8.
Domurath J, Ausias G, Férec J, Heinrich G, Saphiannikova M. A model for the stress tensor in dilute suspensions of rigid spheroids in a generalized Newtonian fluid. Journal of Non-Newtonian Fluid Mechanics. 2019;264(3):73-84.
Amenini F, Brocail J, Chauvin M, Thuillier S. Dynamical properties of flax fibre reinforced PA11 over a large frequency range. Composites Science and Technology. 2019;171:234-243.
Rashidian H, Sellier M, Mandin P. Dynamic wetting of an occlusion after droplet impact. International Journal of Multiphase Flow. 2019;111:264-271.
Mazhoud B, Perrot A, Picandet V, Rangeard D, Courteille E. Impression 3D de mortier sous l'eau. 2019..
Hin S, Bernard C, Doquet V, Yokoyama Y, Magueresse A, Keryvin V. Influence of as-cast spherulites on the fracture toughness of a Zr 55 Cu 30 Al 10 Ni 5 bulk metallic glass. Materials Science and Engineering: A. 2019;A 740-741:137-147.
Grolleau V, Roth C, Lafilé V, Galpin B, Mohr D. Loading of mini-Nakazima specimens with a dihedral punch: Determining the strain to fracture for plane strain tension through stretch-bending. International Journal of Mechanical Sciences. 2019;152:329-345.
Gopakumar D, Pai A, Sisanth K, Thomas S, Sabu K, Khalil A et al. Nanocellulose: Environmental and Engineering Applications of. 2019;1813-1828.
Praveen K, Pious C, Thomas S, Grohens Y. Relevance of Plasma Processing on Polymeric Materials and Interfaces. 2019;1-21.
Dakhli M, Boulila A, Manach P, Tourki Z. Optimization of processing parameters and surface roughness of metallic sheets plastically deformed by incremental forming process. International Journal of Advanced Manufacturing Technology. 2019;102(1-4):977-990.
Tarfaoui M, El Moumen A, Boehle M, Shah O, Lafdi K. Self-heating and deicing epoxy/glass fiber based carbon nanotubes buckypaper composite. Journal of Materials Science. 2019;54(2):1351-1362.
Corvec G, Di Cesare N, Balandraud X, Le Cam J, Gauffreteau J. Thermomechanical characterization of leathers under tension using infrared thermography. Journal of Materials Science. 2019;54(1):862-874.
Qureshi Y, Tarfaoui M, Lafdi K, Lafdi K. Nanotechnology and Development of Strain Sensor for Damage Detection. 2019..
Qureshi Y, Tarfaoui M, Lafdi K, Lafdi K. A Flexible Strain Sensor Design based on Ny-6 Yarn Coated with Ag Nanoparticles for Real Time Strain Monitoring Application. International Journal of Mechanical And Production Engineering. 2019;7(10):18-21.
http://iraj.in/journal/IJMPE
Bourmaud A, Mayer-Laigle C, Baley C, Beaugrand J. About the frontier between filling and reinforcement by fine flax particles in plant fibre composites. Industrial Crops and Products. 2019;141:np.
Scolan Y, Guilcher P. Wave Kinematics in a Two-Dimensional Plunging Breaker. Water Waves. 2019;2(2):185–206.
Constantin M, Niţu E, Badulescu C. Numerical simulation of friction stir welding of pure copper plates. 2019;564(1):12031.
Péron M, Célino A, Castro M, Jacquemin F, Le Duigou A. Biocomposites à Empilement Asymétrique pour l’Étude des Couplages Hygro-mécaniques. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials. 2019;29(4):243-252.
Bruneau M, Bennici S, Brendle J, Dutournié P, Limousy L, Pluchon S. Systems for stimuli-controlled release: Materials and applications. Journal of Controlled Release. 2019;294:355-371.
Pottathara Y, Thomas S, Kalarikkal N, Griesser T, Grohens Y, Bobnar V et al. UV-Induced reduction of graphene oxide in cellulose nanofibril composites. New Journal of Chemistry. 2019;43(2):681-688.
Hameed R, Papon A, Perrot A. Impression 3D en béton - Entre essais physiques et simulations numériques. Béton[s] le Magazine. 2019..
Saadia A, Tayeb Y, Mustapha B, Laurens J. Iterative method to analyze the flow behavior around a cavitating hydrofoil. Journal of Flow Visualization and Image Processing. 2019;26(2):185-207.
Boutelba I, Zid S, Glouannec P, Youcef-Ali S, Magueresse A, Kimouche N. Thermo-hydrous behavior of dried un-blanched potato samples. Journal of Food Engineering. 2019;240:160-170.
Duport C, Leroux J, Roncin K, Jochum C, Parlier Y. Benchmarking of a 3D non-linear lifting line method against 3D RANSE simulations. La Houille Blanche - Revue internationale de l'eau. 2019;2019(5-6):70-73.
James J, Joseph B, Shaji A, Nancy P, Kalarikkal N, Thomas S et al. Microscopic Analysis of Plasma-Activated Polymeric Materials. 2019;287-317.
M. H, Gopakumar D, Arumughan V, Beeran Pottathara Y, K. S. S, Pasquini D et al. Robust Superhydrophobic Cellulose Nanofiber Aerogel for Multifunctional Environmental Applications. Polymers. 2019;11(3):art 495.
Le Duigou A, Chabaud G, Scarpa F, Castro M. Bioinspired Electro-Thermo-Hygro Reversible Shape-Changing Materials by 4D Printing. Advanced Functional Materials. 2019;29(40):1903280.
Fagundes Gasparoto H, Chocron O, Benbouzid M, Siqueira Meirelles P, Saraiva Ferreira L. Torque Analysis of a Flat Reconfigurable Magnetic Coupling Thruster for Marine Renewable Energy Systems Maintenance AUVs. Energies. 2019;12(1):56.
Zhang H, Challamel N, Wang C, Zhang Y. Buckling of multiply connected bar-chain and its associated continualized nonlocal model. International Journal of Mechanical Sciences. 2019;150:168-175.
Péron M, Célino A, Castro M, Jacquemin F, Le Duigou A. Study of hygroscopic stresses in asymmetric biocomposite laminates. Composites Science and Technology. 2019;169:7-15.
Pierre T, Carin M. Characterization of the thermal properties of millimeter-sized insulating materials. International Journal of Thermal Sciences. 2019;135:247-255.
Chabbert B, Rollet S, Réquilé S, Duborper A, Rivard P, Bono P et al. Quality management of hemp straw used in agro-materials. Abstracts of Papers of the American Chemical Society. 2019;257
Aubert I, Bouhattate J, Charles Y, Couvant T, Dhondt M, Duhamel C et al. Local-scale Modeling of Plasticity–Environment Interactions. 2019;413-438.
Liotier P, Pucci M, Le Duigou A, Kervoelen A, Tirillo J, Sarasini F et al. Role of interface formation versus fibres properties in the mechanical behaviour of bio-based composites manufactured by Liquid Composite Molding processes. Composites Part B: Engineering. 2019;163:86-95.
Le Saux M, Brachet J, Vandenberghe V, Rouesne E, Urvoy S, Ambard A et al. Effect of a pre-oxide on the high temperature steam oxidation of Zircaloy-4 andM5 alloys. Journal of Nuclear Materials. 2019;518:386-399.
Ouagne P, Bourmaud A, de Luycker E, Evon P, Fazzini M, Collombet F. 3rd edition of the young researchers' days in bio-sourced composites. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials. 2019;29(5):275-276.
Farzan H, Loulou T, Sarvari S. A new approach to speed up the conjugate gradient method by applying the complex variable differentiation method. Inverse Problems in Science and Engineering. 2019;27(12):1703-1717.
Dumont V, Badulescu C, Adrien J, Carrere N, Thevenet D, Maire E. Experimental investigation of porosities evolution in a bonded assembly by means of X-ray tomography. The Journal of Adhesion. 2019..
Alaeian M, Barreto Orlande H, Lamien B. Application of the photoacoustic technique for temperature measurements during hyperthermia. Inverse Problems in Science and Engineering. 2019;27(12):1651-1671.
Lesiuk G, Sire S, Ragueneau M, Correia J, Pedrosa B, Jesus A. Mean stress effect and fatigue crack closure in material from old bridge erected in the late 19th century. Procedia Structural Integrity. 2019;17:198-205.
Gopakumar D, Pottathara Y, Sabu K, Khalil H, Grohens Y, Thomas S. Nanocellulose-based aerogels for industrial applications. 2019;403-421.
Sadasivuni K, Rattan S, Deshmukh K, Muzaffar A, Ahamed M, Pasha S et al. Hybrid Nano-filler for Value Added Rubber Compounds for Recycling. 2019;59:310-329.
Joseph B, Augustine R, Kalarikkal N, Thomas S, Seantier B, Grohens Y. Recent advances in electrospun polycaprolactone based scaffolds for wound healing and skin bioengineering applications. Materials Today Communications. 2019;19:319-335.
Kedzierski M, Villain J, Falcou-Préfol M, Kerros M, Henry M, Pedrotti M et al. Microplastics in Mediterranean Sea: A protocol to robustly assess contamination characteristics. PLoS ONE. 2019;14(2):e0212088.
Boy V, Liu X, Chamaa M, Lemée Y, Sabourin C, Lendormi T et al. Air impingement drying of digestate. Experimental and modelling study. Chemical Engineering Research and Design. 2019;146:436-448.
Valès B, Marguet S, Créac'Hcadec R, Sohier L, Ferrero J, Navarro P. An Experimental Method Dedicated to the Dynamic Characterization of Structural Adhesives under Drop Weight Conditions. International Journal of Adhesion and Adhesives. 2019;90:106-125.
Joseph B, Maria H, Thomas S, Kalarikkal N, Gopakumar D, James J et al. Nanocellulose: Health Care Applications. 2019;1829-1852.
Badouard C, Traon F, Denoual C, Mayer-Laigle C, Paës G, Bourmaud A. Exploring mechanical properties of fully compostable flax reinforced composite filaments for 3D printing applications. Industrial Crops and Products. 2019;135:246-250.
Amirat Y, Feld G, Elbouchikhi E, Benbouzid M, Ruiz N. Emulateur d’une hydrolienne. La Revue 3E.I. 2019..
Legendre J, Le Grognec P, Doudard C, Moyne S. Analytical, numerical and experimental study of the plastic buckling behavior of thick cylindrical tubes under axial compression. International Journal of Mechanical Sciences. 2019;156:494-505.
Mahmoudi S, Kervoelen A, Robin G, Duigou L, Daya E, Cadou J. Experimental and numerical investigation of the damping of flax–epoxy composite plates. Composite Structures. 2019;208:426-433.
Bourmaud A, Siniscalco D, Foucat L, Goudenhooft C, Falourd X, Pontoire B et al. Evolution of flax cell wall ultrastructure and mechanical properties during the retting step. Carbohydrate Polymers. 2019;206:48-56.
Pottathara Y, Thomas S, Gopakumar D, Grohens Y. Value-Added Products from Natural Fibers Reinforced Composites. 2019;2767-2779.
Le Duigou A, Keryvin V, Beaugrand J, Pernes M, Scarpa F, Castro M. Humidity responsive actuation of bioinspired hygromorph biocomposites (HBC) for adaptive structures. Composites Part A: Applied Science and Manufacturing. 2019;116:36-45.
https://www.sciencedirect.com/journal/composites-part-a-applied-science-and-manufacturing
Ben Othmen K, Sai K, Manach P, Elleuch K. Reverse deep drawing process: Material anisotropy and work-hardening effects. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2019;233(4):699-713.
Ben Elghali S, Outbib R, Benbouzid M. Selecting and optimal sizing of hybridized energy storage systems for tidal energy integration into power grid. Journal of Modern Power Systems and Clean Energy. 2019;7(1):113-122.
Ilioni A, Le Gac P, Badulescu C, Thevenet D, Davies P. Prediction of Mechanical Behaviour of a Bulk Epoxy Adhesive in a Marine Environment. The Journal of Adhesion. 2019;95(1):64-84.
Benmahdi F, Semra S, Haddad D, Mandin P, Kolli M, Bouhelassa M. Breakthrough Curves Analysis and Statistical Design of Phenol Adsorption on Activated Carbon. Chemical Engineering and Technology. 2018;42(2):355-369.
Struyven F, Liu X, Boy V, Lemée Y, Lendormi T, Mandin P et al. Continuous treatment of bacteria by Pulsed Electric Field (PEF). 2018..
Rouway M, Nachtane M, Tarfaoui M, Chakhchaoui N, Omari L, Fraija F et al. Prediction of Mechanical Performance of Natural Fibers Polypropylene Composites: a Comparison Study. 2018;948(1):012031-1-012031-11.
Laquintinie P, Sachan A, Feller J, Lahuec C, Castro M, Seguin F et al. A functionalized carbon nanotube based electronic nose for the detection of nerve agents. 2018..
Laquintinie P, Sachan A, Feller J, Lahuec C, Castro M, Seguin F et al. A functionalized carbon nanotube based electronic nose for the detection of nerve agents. 2018;705-708.
Sassi S, Tarfaoui M, Ben Yahia H. Thermomechanical behavior of adhesively bonded joints under out-of-plane dynamic compression loading at high strain rate. Journal of Composite Materials. 2018;52(30):4171-4184.
Richard C, Souloumiac E, Jestin J, Blanzat M, Cassel S. Influence of dermal formulation additives on the physicochemical characteristics of catanionic vesicles. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2018;558:373-383.
Sassi S, Tarfaoui M, Ben Yahia H. In-situ heat dissipation monitoring in adhesively bonded composite joints under dynamic compression loading using SHPB. Composites Part B: Engineering. 2018;154:64-76.
Arrigoni M, Bauer F, Kerampran S, Le Clanche J, Monloubou M. Development of a PVDF Pressure Gauge for Blast Loading Measurement. Human Factors and Mechanical Engineering for Defense and Safety. 2018;2(2)
Férec J, Bertevas E, Khoo B, Ausias G, Phan-Thien N. Thermal or electrical bulk properties of rod-filled composites. International Journal of Engineering Science. 2018;133:219-230.
Behrel M, Roncin K, Iachkine P, Hascoet R, Leroux J, Montel F et al. Boat towed by kite : methodolgy for sea trials. 2018..
https://jh2018.sciencesconf.org
Thomas T, Lemechko P, Le Fellic M, Elain A, Bazire A, Bruzaud S. 47ème Colloque National du Groupe Français des Polymères. 2018..
Vinceslas T, Lecompte T, Colinart T, Hamard E, Hellouin de Menibus A, Lenormand H. Caractérisation mécanique d’éco-matériaux terre-chanvre : effet de la variabilité des constituants. 2018..
Vinceslas T, Colinart T, Hamard E, Hellouin de Menibus A, Lecompte T, Lenormand H. Caractérisation hygrothermique des mélanges terre/chanvre : évaluation des incertitudes et conséquences. 2018..
Laur V, Abboud M, Maalouf A, Palessonga D, Chevalier A, Ville J. Heat-Resistant 3D Printed Microwave Devices. 2018;1318-1320.
Elishakoff I, Hache F, Challamel N. Variational derivation of governing differential equations for truncated version of Bresse-Timoshenko beams. Journal of Sound and Vibration. 2018;435:409-430.
Tarfaoui M, Lafdi K, Hassoon O, Nachtane M, El Moumen A. Inter laminar failure behavior in laminate carbon nanotubes-based polymer composites. Journal of Composite Materials. 2018;52(26):3655-3667.
Nachtane M, Tarfaoui M, Saifaoui D, El Moumen A, Hassoon O, Ben Yahia H. Evaluation of durability of composite materials applied to renewable marine energy: Case of ducted tidal turbine. Energy Reports. 2018;4:31-40.
Ben Yahia H, Tarfaoui M, El Moumen A, Ouinas D, Hassoon O. Mechanical properties of offshoring polymer composite pipes at various temperatures. Composites Part B: Engineering. 2018;152:231-240.
Gueguen Y, Keryvin V, Bureau B. Photo-rhéologie et piégeage d’anélasticité. 2018..
Laquintinie P, Sachan A, Feller J, Lahuec C, Castro M, Seguin F et al. An Electronic Nose Prototype for the On-Field Detection of Nerve Agents. 2018;1-4.
Bertevas E, Ferec J, Khoo B, Ausias G, Phan-Thien N. Smoothed particle hydrodynamics (SPH) modeling of fiber orientation in a 3D printing process. Physics of Fluids. 2018;30(10):103103.
Wilfart A, Dourmad J, Edouard N, Hassouna M, Keita A, Lassalas J et al. APIVALE" an experimental platform for an integrated approach of organic effluent recycling and valorization. 2018;np.
Troufflard J, Laurent H, Rio G, Omnes B, Javanaud S. Temperature-dependent modelling of a HNBR O-ring seal above and below the glass transition temperature. Materials & Design. 2018;156:1-15.
Legendre J, Créac'Hcadec R, Gilbert F, Jacquet D. A new method to measure the adhesion capability of the metallic surface under shear loading using a modified Arcan test. The Journal of Adhesion. 2018;94(12):1017-1035.
Arbaoui Y, Gingat R, Pen A, Agaciak P, Palessonga D, Roquefort P et al. Fused Deposition Modeling: a new technology for the fabrication of microwave loads. 2018..
Arbaoui Y, Gingat R, Pen A, Agaciak P, Palessonga D, Roquefort P et al. Fused deposition modeling : A new technology for the fabrication. 2018..
Ellouze F, Seantier B, Amar N, Deratani A. Selective separation of α- and β-cyclodextrins by complexation/ultrafiltration using supra molecular host-guest interaction. Separation and Purification Technology. 2018;204:226-233.
Iezid M, Goumeidane F, Abidi A, Gherraf N, Legouera M, Poulain M et al. Spectroscopic analysis of up conversion luminescence in doped halogeno-antimonite glass. Ceramics International. 2018;44(15):18060-18066.
Beuguel Q, Boyer S, Settipani D, Monge G, Haudin J, Vergnes B et al. Crystallization behavior of polypropylene/graphene nanoplatelets composites. Polymer Crystallization. 2018;1(3)
Pham H, Bourgeot J, Benbouzid M. Comparative Investigations of Sensor Fault-Tolerant Control Strategies Performance for Marine Current Turbine Applications. IEEE Journal of Oceanic Engineering. 2018;43(4):1024-1036.
Ben Yahia H, Tarfaoui M, El Moumen A, Ouinas D. Prediction of notched strength for cylindrical composites pipes under tensile loading conditions. Composites Part B: Engineering. 2018;150:104-114.
Lerbet J, Challamel N, Nicot F, Darve F. Coordinate free nonlinear incremental discrete mechanics. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2018;98(10):1813-1833.
Toumi S, Elbouchikhi E, Amirat Y, Trabelsi M, Benbouzid M, Mimouni M. Marine Current Turbine System Post-Fault Behavior under an Open Circuit Fault. Advances in Electrical and Electronic Engineering. 2018;16(3)
Toumi S, Elbouchikhi E, Amirat Y, Trabelsi M, Benbouzid M, Mimouni M. Marine Current Turbine System Post-Fault Behavior under an Open Circuit Fault. Advances in Electrical and Electronic Engineering. 2018;16(3)
Al-Sayed L, Boyer V, Madieta E, Mehinagic E, Lanoiselle J. Pulsed Electric Fields (PEF) as pre-treatment for freeze-drying of plant tissues. 2018;8.
Craipeau T, Lecompte T, Toussaint F, Perrot A. Evolution of Concrete/Formwork Interface in Slipforming process. 2018..
Caisso C, Jacques N, El Malki Alaoui A, Fresnel H, Demmouche Y. Characterisation of the high strain rate behaviour of tubular materials. 2018;183
Grolleau V, Lafilé V, Roth C, Galpin B, Maheo L, Mohr D. Rate-dependent ductile fracture under plane strain tension: experiments and simulations. 2018;183
El Cheikh A, Pellen F, Le Jeune B, Le Brun G, Abboud M, Daou M et al. Study of the degradation process of glass-ionomer cements by analysis of speckle field dynamics. 2018;35.
Tarfaoui M, El Moumen A. Dynamic behavior of top-hat bonded stiffened composite panels: Experimental characterization. Composites Part B: Engineering. 2018;149:216-226.
Jeguirim M, Belhachemi M, Limousy L, Bennici S. Adsorption/reduction of nitrogen dioxide on activated carbons: Textural properties versus surface chemistry – A review. Chemical Engineering Journal. 2018;347(18-19):493-504.
Zhang H, Wang C, Challamel N, Zhang Y. Uncovering the finite difference model equivalent to Hencky bar-net model for axisymmetric bending of circular and annular plates. Applied Mathematical Modelling. 2018;61:300-315.
Carrere N, Tual N, Bonnemains T, Lolive É, Davies P. Modelling of the damage development in carbon/epoxy laminates subjected to combined seawater ageing and mechanical loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2018;232(9):761-768.
Hache F, Challamel N, Elishakoff I. Lattice and continualized models for the buckling study of nonlocal rectangular thick plates including shear effects. International Journal of Mechanical Sciences. 2018;145:221-230.
Le Livec R, Le Bideau D, Mandin P, Dubois A, Paul S. Hydrodynamic study of an alkaline electrolyser. 2018..
Le Bideau D, Mandin P, Benbouzid M, Morancais P. Optimization of the alkaline water electrolysis via numerical simulation. 2018..
Vinceslas T, Colinart T, Hamard E, Hellouin de Menibus A, Lecompte T, Lenormand H. Light earth performances for thermal insulation: Application to earth-hemp. 2018..
Nonnotte G, Williot P, Pichavant-Rafini K, Rafini M, Maxime V, Nonnotte L. Oxygen Demand in Sturgeon Farming. 2018;569-584.
Bahari-Sambran F, Eslami-Farsani R, Arbab Chirani S. The flexural and impact behavior of the laminated aluminum-epoxy/basalt fibers composites containing nanoclay: An experimental investigation. Journal of Sandwich Structures and Materials. 2018;22(6):1931-1951.
Souli I, Liu X, Lendormi T, Chaira N, Ferchichi A, Lanoiselle J. Evaluation of Methane Production of Six Varieties of Date Pulp Waste (Phoenix Dactylifera L.). Chemical Engineering Transactions. 2018..
Ezzine M, Amiri A, Tarfaoui M. Experimental and numerical investigation of the fracture behavior of adhesive shear tests single lap joints. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018;40(8)
Hassoon O, Tarfaoui M, El Malki Alaoui A, El Moumen A. Mechanical behavior of composite structures subjected to constant slamming impact velocity: an experimental and numerical investigation. International Journal of Mechanical Sciences. 2018;144:618-627.
Fouquet Y, Pelleter E, Konn C, Chazot G, Dupré S, Alix S et al. Volcanic and hydrothermal processes in submarine calderas: The Kulo Lasi example (SW Pacific). Ore Geology Reviews. 2018;99:314-343.
Simoes V, Neto D, Oliveira M, Alves J, Laurent H, Menezes L. Temperature analysis during the drawing of an aluminum cylindrical cup. 2018;1063
Ayachi N, Guermazi N, Manach P, Thuillier S. Design of a reverse deep drawing experiment enhancing strain path changes. 2018;1063:012133.
Thuillier S, Pham C, Manach P. 2D springback and twisting after drawing of copper alloy sheets. 2018;1063:012124.
Olioso A, Allies A, Boulet G, Delogu E, Demarty J, Elvira B et al. Monitoring Evapotranspiration with Remote Sensing Data and Ground Data Using Ensemble Model Averaging. 2018;7656-7659.
Hache F, Challamel N, Elishakoff I. Nonlocal Approaches for the Vibration of Lattice Plates Including Both Shear and Bending Interactions. International Journal of Structural Stability and Dynamics. 2018;18(07):1850094.
Liu S, Villafaña López L, Clavijo E, Bourseau P, Frappart M, Couallier E. Membrane filtration for the recovery of lipids from microalgae extracts. 2018..
Trenvouez G, Nivard M, Bernard C, Keryvin V, Guin J. Strain rate sensitivity of Ge-Se glasses. 2018..
Trenvouez G, Bernard C, Nivard M, Kéryvin V, Guin J. Strain rate sensitivity of germanium-selenium glasses. 2018..
Zhang H, Wang C, Challamel N. Modelling vibrating nano-strings by lattice, finite difference and Eringen's nonlocal models. Journal of Sound and Vibration. 2018;425:41-52.
Duigou L, Mahmoudi S, Kervoelen A, Cadou J, Robin G, Daya E. Numerical and experimental investigations of damping of flax-epoxy laminated composite. 2018..
Zia M, Elbouchikhi E, Benbouzid M. Microgrids energy management systems: A critical review on methods, solutions, and prospects. Applied Energy. 2018;222:1033-1055.
Geslain E, Pierre T, Rogeon P, Pouvreau C, Cretteur L. Contact temperature measurement by infrared thermography during resistance spot welding process. 2018;677-684.
Maréchal J, Morvan C, Guillocheau S, Cylly D, Marie X, Cluzeau D. Characterization of earthworm communities in reconstituted anthropic soils of urban areas. 2018..
Hellouin de Menibus A, Basco C, Degrave-Lemeurs M, Colinart T, Gle P, Hamard E et al. Étude des bétons biosourcés à base de terre crue et de chanvre dans le cadre du projet ECO-TERRA. 2018..
Tahenni T, Chemrouk M, Lecompte T. Steel fibres effects on the flexural cracking behaviour of reinforced high strength concrete beams with particular reference to the major design codes crack width models. European Journal of Environmental and Civil Engineering. 2018;24(11):1709-1728.
Helbert G, Dieng L, Arbab-Chirani S, Saint-Sulpice L, Lecompte T, Calloch S et al. Investigation of NiTi based damper effects in bridge cables vibration response: damping capacity and stiffness changes. Engineering Structures. 2018;165:184-197.
Helbert G, Dieng L, Arbab Chirani S, Saint-Sulpice L, Lecompte T, Calloch S et al. Investigation of NiTi based damper effects in bridge cables vibration response: Damping capacity and stiffness changes. Engineering Structures. 2018;165:184-197.
Wolf J, Nikolakopoulos K, Longère P, Crété J, Cadou J. XFEM-CZM combination for the numerical treatment of ductile fracture. 2018..
Le Bideau D, Mandin P, Benbouzid M, Morancais P. Optimisation de l’électrolyse alcaline de l’eau par simulation numérique. 2018..
Struyven F, Liu X, Karaboue L, Mandin P, Lemee Y, Lanoiselle J et al. Hygiénisation des intrants de la méthanisation par champs électriques pulsés (CEP). 2018..
Baba El Gannouni M, Mandin P, Le Bideau D, Le Livec R, Benbouzid M, Paul S. Active control of generation of bubbles in a biphasic fluid. 2018..
Herault D, Thuillier S, Manach P, Duval J. Strain path changes in Reverse Redrawing of DP Steels. 2018;418:012042.
Hache F, Elishakoff I, Challamel N. Critical comparison of exact solutions in random vibration of beams using three versions of Bresse-Timoshenko theory. Probabilistic Engineering Mechanics. 2018;53:95-108.
Tarfaoui M, Lafdi K, Beloufa I, Daloia D, Muhsan A. Effect of Graphene Nano-Additives on the Local Mechanical Behavior of Derived Polymer Nanocomposites. Polymers. 2018;10(6)
Boutelba I, Zid S, Glouannec P, Magueresse A, Youcef-Ali S. Experimental data on convective drying of potato samples with different thickness. Data in Brief. 2018;18:1567-1575.
Hassoon O, Tarfaoui M, El Moumen A, Ben Yahia H, Nachtane M. Numerical Evaluation of Dynamic Response for Flexible Composite Structures under Slamming Impact for Naval Applications. Applied Composite Materials. 2018;25(3):689-706.
Rokbani M, Saint-Sulpice L, Arbab Chirani S, Bouraoui T. Fatigue properties by “self-heating” method: Application to orthodontic Ni-Ti wires after hydrogen charging. Journal of Intelligent Material Systems and Structures. 2018;29(16):3242-3253.
Lauzet N, Mauree D, Colinart T, Musy M, Lapray K. Construction d’un fichier microclimatique urbain utilisable en STD. 2018..
Guevel Y, Allain T, Girault G, Cadou J. Numerical bifurcation analysis for 3-dimensional sudden expansion fluid dynamic problem. International Journal for Numerical Methods in Fluids. 2018;87(1):1-26.
Laurens J, Guilcher P. Motorways of the sea. 2018..
Jacques N, Barthélémy R. An analytical expression for the Hugoniot stress–strain curve of elastic-plastic cellular materials. International Journal of Impact Engineering. 2018;115:76-80.
Dermouchi A, Lendormi T, Arris S, Lanoiselle J, Bencheikh-Lehocine M. Cutting Oil Emulsion Anaerobic Biodegradation: Electrocoagulation Pretreatment Effect. Chemical Engineering Transactions. 2018..
Claude B, Duigou L, Girault G, Guevel Y, Cadou J. Numerical comparison of eigenvalue algorithms for vibroacoustic problems. Mechanics Research Communications. 2018..
Challamel N, Wang C, Zhang H, Kitipornchai S. Exact and Nonlocal Solutions for Vibration of Axial Lattice with Direct and Indirect Neighboring Interactions. Journal of Engineering Mechanics - ASCE. 2018;144(5)
Tarfaoui M, Nachtane M, Shah O, Boudounit H. Numerical study of the structural static and fatigue strength of wind turbine blades. 2018;13:1215-1223.
Pradeau A, Yoon J, Thuillier S, Lou Y, Zhang S. Rupture Model Based on Non-Associated Plasticity. 2018..
Aquino J, Campos A, Souto N, Thuillier S. Experimental validation of a new heterogeneous mechanical test design. 2018..
Abcha N, Kelai F, Latrache N, Crumeyrolle O, Mutabazi I. Radial Propagation of the Instability Modes Observed in a Viscoelastic Couette–Taylor Flow. 2018;181-196.
Desvaux M, Bildstein H, Multon B, Ben Ahmed H, Sire S, Fasquelle A et al. Magnetic losses and thermal analysis in a magnetic gear for wind turbine. 2018;1-7.
Gentric C, Bruzaud S, Sauleau P. Dispositif support pour la culture d’éponges marines. 2018..
Ercolanelli J, Le Boulluec M, Scolan Y, Babarit A, Magaldi P. Experimental and numerical investigation of sloshing in anti-roll tank using effective gravity angle. 2018;4-7.
El Moumen A, Tarfaoui M, Hassoon O, Lafdi K, Ben Yahia H, Nachtane M. Experimental Study and Numerical Modelling of Low Velocity Impact on Laminated Composite Reinforced with Thin Film Made of Carbon Nanotubes. Applied Composite Materials. 2018;25(2):309–320.
Ghouma I, Jeguirim M, Limousy L, Bader N, Ouederni A, Bennici S. Factors Influencing NO2 Adsorption/Reduction on Microporous Activated Carbon: Porosity vs. Surface Chemistry. Materials. 2018;11(4):622.
Tarfaoui M, Nachtane M, Khadimallah H, Saifaoui D. Simulation of Mechanical Behavior and Damage of a Large Composite Wind Turbine Blade under Critical Loads. Applied Composite Materials. 2018;25(2):237-254.
Ilioni A, Badulescu C, Carrere N, Davies P, Thevenet D. A viscoelastic-viscoplastic model to describe creep and strain rate effects on the mechanical behaviour of adhesively-bonded assemblies. International Journal of Adhesion and Adhesives. 2018;82:184-195.
Doisenbant G, Le Boulluec M, Scolan Y, Guyot M. Numerical and experimental modeling of offshore wind energy capture: Application to reduced scale model testing. Wind Engineering. 2018;42(2):108-114.
Hesami M, Pino L, Saint-Sulpice L, Legrand V, Kadkhodaei M, Arbab-Chirani S et al. Rotary bending fatigue analysis of shape memory alloys. Journal of Intelligent Material Systems and Structures. 2018;29(6):1183-1195.
Caetano L, Grolleau V, Galpin B, Penin A, Capdeville J. High strain rate out-of-plane compression of birch plywood from ambient to cryogenic temperatures. Strain. 2018;54(2):e12264.
Guzman Maldonado E, Xiong H, Hamila N, Boisse P. Modélisation du procédé de thermoestampage de composites préimprégnés à matrice thermoplastique. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials. 2018;28:9-33.
Hache F, Challamel N, Elishakoff I. Asymptotic derivation of nonlocal beam models from two-dimensional nonlocal elasticity. Mathematics and Mechanics of Solids. 2018;24(8):2425-2443.
Toumi S, Amirat Y, Trabelsi M, Elbouchikhi E, Mimouni M, Benbouzid M. Backstepping control of a PMSG-based marine current turbine system under faulty conditions. 2018;1-6.
Fernez N, Arbaoui Y, Niemiec R, Agaciak P, Burgnies L, Azar M et al. Caractérisation d'absorbant métamatériau PENiFe en bandes S et L. 2018..
Laur V, Kaissar Abboud M, Azar M, Chevalier A, Ville J. Impression 3D de composants hyperfréquences pour environnements sévères. 2018..
James J, Grohens Y, Vignaud G, Kalarikkal N, Thomas S. An analysis of the effect of cross linking on polystyrene thin films. 2018;1:109.
Helbert V, Dhondt M, Homette R, Arbab-Chirani S, Calloch S. Effect of mechanical pre-loadings on corrosion resistance of chromium-electroplated steel rods in marine environment. Materials Research Express. 2018;5(3):036522.
Fourest T, Deletombe É, Faucher V, Arrigoni M, Dupas J, Laurens J. Comparison of Keller-Miksis model and finite element bubble dynamics simulations in a confined medium. Application to the hydrodynamic ram. European Journal of Mechanics - B/Fluids. 2018;68:66-75.
Lapisa R, Bozonnet E, Salagnac P, Abadie M. Optimized design of low-rise commercial buildings under various climates – Energy performance and passive cooling strategies. Building and Environment. 2018;132:83-95.
Fernez N, Arbaoui Y, Maalouf A, Chevalier A, Agaciak P, Burgnies L et al. Moore's curve structuring of ferromagnetic composite PE-NiFe absorbers. Journal of Applied Physics. 2018;123(8):084902.
Sassi S, Tarfaoui M, Ben Yahia H. Experimental study of the out-of-plane dynamic behaviour of adhesively bonded composite joints using split Hopkinson pressure bars. Journal of Composite Materials. 2018;52(21):2875-2885.
Simões V, Laurent H, Oliveira M, Menezes L. The influence of warm forming in natural aging and springback of Al-Mg-Si alloys. International Journal of Material Forming. 2018;12(1):57-68.
Liu T, Kim K, Juvela M, Wang K, Tatematsu K, Francesco J et al. The TOP-SCOPE Survey of Planck Galactic Cold Clumps: Survey Overview and Results of an Exemplar Source, PGCC G26.53+0.17. The Astrophysical Journal Supplement. 2018;234(2):28.
Bigi N, Behrel M, Roncin K, Leroux J, Nême A, Jochum C et al. Dynamic modeling of ships towed by kite. La Houille Blanche - Revue internationale de l'eau. 2018;2018(1):8-10.
Podeur V, Merdrignac D, Behrel M, Roncin K, Fonti C, Jochum C et al. Fuel economy assessment tool for auxiliary kite propulsion of merchant ship. La Houille Blanche - Revue internationale de l'eau. 2018;2018(1):5-7.
https://www.shf-lhb.org/articles/lhb/abs/2018/01/lhb2018001/lhb2018001.html
Bedon C, Zhang X, Santos F, Honfi D, Kozłowski M, Arrigoni M et al. Performance of structural glass facades under extreme loads - Design methods, existing research, current issues and trends. Construction and Building Materials. 2018;163:921-937.
Bonnet E, Escoffier B, Paschos V, Stamoulis G. Purely combinatorial approximation algorithms for maximum k -vertex cover in bipartite graphs. Discrete Optimization. 2018;27:26-56.
Hache F, Challamel N, Elishakoff I. Asymptotic derivation of nonlocal plate models from three-dimensional stress gradient elasticity. Continuum Mechanics and Thermodynamics. 2018;31(1):47-70.
Herisson B, Challamel N, Picandet V, Perrot A. A localization analysis of a non-uniform damage lattice in presence of strength gradient. International Journal of Fracture. 2018;210(1-2):29-43.
Pham H, Bourgeot J, Benbouzid M. Fault‐tolerant finite control set‐model predictive control for marine current turbine applications. IET Renewable Power Generation. 2018;12(4):415-421.
Le Bideau P, Noel H, Yassine H, Glouannec P. Experimental and numerical studies for the air cooling of fresh cauliflowers. Applied Thermal Engineering. 2018;137:238-247.
Chenni A, Djidjelli H, Boukerrou A, Martinez-Vega J, Grohens Y, Saulnier B. Ternary melt blend based on poly (lactic acid)/chitosan and cloisite 30B A study of microstructural, thermo-mechanical and barrier properties. Materials Testing. 2018;60(9):825-832.
Raimbaud Q, Monloubou M, Kerampran S, Cantat I. Shockwave / foam film interaction (presenter Q. Raimbaud). 2018..
Hache F, Challamel N, Elishakoff I. Nonlocal Approaches for the Vibration of Lattice Plates Including Both Shear and Bending Interactions. International Journal of Structural Stability and Dynamics. 2018;18(7)
Tanguy M, Bourmaud A, Beaugrand J, Gaudry T, Baley C. Polypropylene reinforcement with flax or jute fibre; Influence of microstructure and constituents properties on the performance of composite. Composites Part B: Engineering. 2018;139:64-74.
Beltifa A, Feriani A, Macherki M, Ghorbel A, Ghazouani L, Di Bella G et al. Persistent plasticizers and bisphenol in the cheese of Tunisian markets induced biochemical and histopathological alterations in male BALB/c mice. Environmental Science and Pollution Research. 2018;25(7):6545-6557.
Merotte J, Le Duigou A, Kervoelen A, Bourmaud A, Behlouli K, Sire O et al. Flax and hemp nonwoven composites The contribution of interfacial bonding to improving tensile properties. Polymer Testing. 2018;66:303-311.
Chen H, Tang T, Aït-Ahmed N, Benbouzid M, Machmoum M, Zaïm M. Attraction, Challenge and Current Status of Marine Current Energy. IEEE Access. 2018;6:12665-12685.
Roué V, Doudard C, Calloch S, Montel F, Pujol D’andrebo Q, Corpace F. Rapid determination of the high cycle fatigue properties of high temperature aeronautical alloys by self-heating measurements. MATEC Web of Conferences. 2018;165
Chevillotte Y, Marco Y, Davies P, Bles G, Arhant M. Fatigue of polyamide mooring ropes for floating wind turbines. MATEC Web of Conferences. 2018;165
Bourmaud A, Beaugrand J, Shah D, Placet V, Baley C. Towards the design of high-performance plant fibre composites. Progress in Materials Science. 2018;97:347-408.
Le Gall M, Davies P, Martin N, Baley C. Recommended flax fibre density values for composite property predictions. Industrial Crops and Products. 2018;114:52-58.
Kedzierski M, Le Tilly V, Bourseau P, Cesar G, Sire O, Bruzaud S. Microplastics elutriation system Part B Insight of the next generation. Marine Pollution Bulletin. 2018;133:9-17.
Geslain E, Rogeon P, Pierre T, Pouvreau C, Cretteur L. Coating effects on contact conditions in resistance spot weldability. Journal of Materials Processing Technology. 2018;253:160-167.
El Achkar J, Lendormi T, Salameh D, Louka N, Maroun R, Lanoiselle J et al. Anaerobic digestion of grape pomace Effect of the hydraulic retention time on process performance and fibers degradability. Waste Management. 2018;71:137-146.
Goudenhooft C, Siniscalco D, Arnould O, Bourmaud A, Sire O, Gorshkova T et al. Investigation of the Mechanical Properties of Flax Cell Walls during Plant Development: The Relation between Performance and Cell Wall Structure. Fibers. 2018;6(1):6.
Gopakumar D, Pai A, Pottathara Y, Pasquini D, Morais L, Luke M et al. Cellulose Nanofiber-Based Polyaniline Flexible Papers as Sustainable Microwave Absorbers in the X-Band. ACS Applied Materials & Interfaces. 2018;10(23):20032-20043.
Baley C, Gomina M, Bréard J, Bourmaud A, Drapier S, Ferreira M et al. Specific features of flax fibres used to manufacture composite materials. International Journal of Material Forming. 2018;12(6):1023-1052.
Leveuf L, Marco Y, Le Saux V, Navrátil L, Leclercq S, Olhagaray J. Fast screening of the fatigue properties of thermoplastics reinforced with short carbon fibers based on thermal measurements. Polymer Testing. 2018;68:19-26.
Santharam P, Parenteau T, Charrier P, Taveau D, Le Saux V, Marco Y. Complex fibers orientation distribution evaluation in short glass fiber-reinforced thermoplastic (PA66 GF50). MATEC Web of Conferences. 2018;165
Alfonso L, Badulescu C, Carrère N. Use of the modified Arcan fixture to study the strength of bonded assemblies for automotive applications. International Journal of Adhesion and Adhesives. 2018;80:104-114.
Pecenko R, Challamel N, Colinart T, Picandet V. (Semi-)analytical solution of Luikov equations for time-periodic boundary conditions. International Journal of Heat and Mass Transfer. 2018;124:533-542.
Liebscher M, Domurath J, Krause B, Saphiannikova M, Heinrich G, Poetschke P. Electrical and melt rheological characterization of PC and co-continuous PC/SAN blends filled with CNTs Relationship between melt-mixing parameters, filler dispersion, and filler aspect ratio. Journal of Polymer Science Part B: Polymer Physics. 2018;56(1):79-88.
Falcou-Préfol M, Kedzierski M, Villain J, Kerros M, Elineau A, Pedrotti M et al. Statistical Methodology for Identifying Microplastic Samples Collected During TARA Mediterranean Campaign. 2018..
Mostafaiyan M, Wiessner S, Heinrich G, Hosseini M, Domurath J, Khonakdar H. Application of local least squares finite element method (LLSFEM) in the interface capturing of two-phase flow systems. Computers and Fluids. 2018;174:110-121.
Balderrama J, Dourges M, Magueresse A, Maheo L, Deleuze H, Glouannec P. Emulsion-templated pullulan monoliths as phase change materials encapsulating matrices. Materials Today Communications. 2018;17:466-473.
Tripathi K, Sachan A, Castro M, Choudhary V, Sonkar S, Feller J. Green carbon nanostructured quantum resistive sensors to detect volatile biomarkers. Sustainable Materials and Technologies. 2018;16:1-11.
Pottathara Y, Bobnar V, Finsgar M, Grohens Y, Thomas S, Kokol V. Cellulose nanofibrils-reduced graphene oxide xerogels and cryogels for dielectric and electrochemical storage applications. Polymer. 2018;147:260-270.
Martins J, Andrade-Campos A, Thuillier S. Comparison of inverse identification strategies for constitutive mechanical models using full-field measurements. International Journal of Mechanical Sciences. 2018;145:330-345.
Gopakumar D, Manna S, Pasquini D, Thomas S, Grohens Y. Nanocellulose: Extraction and application as a sustainable material for wastewater purification. 2018;469-486.
Challamel N, Aydogdu M, Elishakoff I. Statics and dynamics of nanorods embedded in an elastic medium: Nonlocal elasticity and lattice formulations. European Journal of Mechanics - A/Solids. 2018;67:254-271.
Perrot A, Rangeard D, Menasria F, Guiheneuf S. Strategies for optimizing the mechanical strengths of raw earth-based mortars. Construction and Building Materials. 2018;167:496-504.
Jimenez-Saelices C, Seantier B, Grohens Y, Capron I. Thermal Superinsulating Materials Made from Nanofibrillated Cellulose-Stabilized Pickering Emulsions. ACS Applied Materials & Interfaces. 2018;10(18):16193-16202.
https://pubs.acs.org/journal/aamick
Ballerini T, Pen J, Andrady A, Cole M, Galgani F, Kedzierski M et al. Plastic pollution in the ocean : what we know and what we don't know about. 2018;1-27 p..
Thuillier S, Zang S, Troufflard J, Manach P, Jegat A. Modeling Bake Hardening Effects in Steel Sheets-Application to Dent Resistance. Metals. 2018;8(8):6137.
Siniscalco D, Arnould O, Bourmaud A, Le Duigou A, Baley C. Monitoring temperature effects on flax cell-wall mechanical properties within a composite material using AFM. Polymer Testing. 2018;69:91-99.
Bigi N, Nême A, Roncin K, Leroux J, Bles G, Jochum C et al. Analytical tether model for static kite flight. 2018;57-78.
Wolf J, Longère P, Cadou J, Crété J. Numerical modeling of strain localization in engineering ductile materials combining cohesive models and X-FEM. International Journal of Mechanics and Materials in Design. 2018;14(2):177-193.
Perrot A, Rangeard D, Courteille E. 3D printing of earth-based materials Processing aspects. Construction and Building Materials. 2018;172:670-676.
Kedzierski M, d'Almeida M, Magueresse A, Le Grand A, Duval H, Cesar G et al. Threat of plastic ageing in marine environment. Adsorption/desorption of micropollutants. Marine Pollution Bulletin. 2018;127:684-694.
Farzan H, Loulou T, Sarvari S. Boundary Condition Estimation of Ablating Material Using Modified Sequential Function Specification Method. Journal of Thermophysics and Heat Transfer. 2018;32(2):514-524.
Muthuraj R, Misra M, Mohanty A. Biodegradable compatibilized polymer blends for packaging applications A literature review. Journal of Applied Polymer Science. 2018;135(24)
Bedon C, Arrigoni M, Santos F, Figuli L. Advancements in Design and Analysis of Protective Structures. Advances in Civil Engineering. 2018;2018:7024982.
Broudin M, Marco Y, Le Saux V, Charrier P, Hervouet W, Le Gac P. Investigation of thermo-oxidative ageing effects on the fatigue design of automotive anti-vibration parts. MATEC Web of Conferences. 2018;165
Dhakal H, Bourmaud A, Berzin F, Almansour F, Zhang Z, Shah D et al. Mechanical properties of leaf sheath date palm fibre waste biomass reinforced polycaprolactone (PCL) biocomposites. Industrial Crops and Products. 2018;126:394-402.
Balutch T, Huneau B, Marco Y, Charrier P, Champy C. Fatigue behaviour of an industrial synthetic rubber. MATEC Web of Conferences. 2018;165
Jayapragasam P, Le Bideau P, Loulou T. Computing sensitivity coefficients by using complex differentiation: Application to heat conduction problem. Numerical Heat Transfer, Part B Fundamentals. 2018;74(5):729-745.
Hérisson B, Challamel N, Picandet V, Perrot A, Wang C. Static and Dynamic Behaviors of Microstructured Membranes within Nonlocal Mechanics. Journal of Engineering Mechanics - ASCE. 2018;144(1)
Glanowski T, Huneau B, Marco Y, Le Saux V, Champy C, Charrier P. Fatigue initiation mechanisms in elastomers: a microtomography-based analysis. MATEC Web of Conferences. 2018;165
Requile S, Goudenhooft C, Bourmaud A, Le Duigou A, Baley C. Exploring the link between flexural behaviour of hemp and flax stems and fibre stiffness. Industrial Crops and Products. 2018;113:179-186.
Nag-Chowdhury S, Bellegou H, Pillin I, Castro M, Longrais P, Feller J. Crossed investigation of damage in composites with embedded quantum resistive strain sensors (sQRS), acoustic emission (AE) and digital image correlation (DIC). Composites Science and Technology. 2018;160:79-85.
Palazzolo M, Dourges M, Magueresse A, Glouannec P, Maheo L, Deleuze H. Preparation of Lignosulfonate-Based Carbon Foams by Pyrolysis and Their Use in the Microencapsulation of a Phase Change Material. ACS Sustainable Chemistry & Engineering. 2018;6(2):2453-2461.
El Achkar J, Lendormi T, Salameh D, Louka N, Maroun R, Lanoiselle J et al. Influence of pretreatment conditions on lignocellulosic fractions and methane production from grape pomace. Bioresource Technology. 2018;247:881-889.
Ibraim E, Camenen J, Diambra A, Kairelis K, Visockaite L, Consoli N. Energy efficiency of fibre reinforced soil formation at small element scale Laboratory and numerical investigation. Geotextiles and Geomembranes. 2018;46(4):497-510.
Bourmaud A, Fazzini M, Renouard N, Behlouli K, Ouagne P. Innovating routes for the reused of PP-flax and PP-glass non woven composites A comparative study. Polymer Degradation and Stability. 2018;152:259-271.
Muthuraj R, Jimenez-Saelices C, Grohens Y, Seantier B. Applications of Polysaccharide and Protein Based Aerogels in Thermal Insulation. 2018;58:261-294.
de Solminihac A, Nême A, Duport C, Leroux J, Roncin K, Jochum C et al. Kite as a beam: A fast method to get the flying shape. 2018;79-97.
Kedzierski M, d'Almeida M, Magueresse A, Le Grand A, Duval H, César G et al. Menace associée au vieillissement de plastiques dans l’environnement marin : Adsorption / désorption de micropolluants. 2018..
Behrel M, Roncin K, Leroux J, Montel F, Hascoët R, Nême A et al. Application of phase averaging method for measuring kites performance: onshore results. Journal of Sailing Technology. 2018;2018-05.
Abou Dalle A, Djelal H, Fourcade F, Domergue L, Assadi A, Lendormi T et al. Metronidazole removal by means of a combined system coupling an electro-Fenton process and a conventional biological treatment By-products monitoring and performance enhancement. Journal of Hazardous Materials. 2018;359:85-95.
Tall M, Hariri S, Le Grognec P, Simonet Y. Elastoplastic buckling and collapse of spherical shells under combined loadings. Thin-Walled Structures. 2018;123:114-125.
Requile S, Le Duigou A, Bourmaud A, Baley C. Peeling experiments for hemp retting characterization targeting biocomposites. Industrial Crops and Products. 2018;123:573-580.
Goudenhooft C, Bourmaud A, Baley C. Conventional or greenhouse cultivation of flax What influence on the number and quality of flax fibers? Industrial Crops and Products. 2018;123:111-117.
Adrar S, Habi A, Ajji A, Grohens Y. Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends. Applied Clay Science. 2018;157:65-75.
Piarroux R, Romain T, Martin A, Lachaud L, Gabriel F, Vitte J et al. Preliminary evaluation of a new immunochromatographic test for anti-Aspergillus antibodies detection. 2018;56(2):S33.
Durrieu G, Pham Q, Foltete A, Maxime V, Grama I, Tilly V et al. Dynamic extreme values modeling and monitoring by means of sea shores water quality biomarkers and valvometry. Journal of Statistical Software. 2018;87(12):437-478.
Bahar T, Boy V, Lemée Y, Magueresse A, Lendormi T, Glouannec P et al. Air Impingement Drying of Foods: Modelling Coupled Heat and Mass Transfer and Experimental Validation. Chemical Engineering Transactions. 2018;70
Leveuf L, Marco Y, Le Saux V, Navrátil L, Leclercq S, Olhagaray J. Fast screening of the fatigue properties of thermoplastics reinforced with short carbon fibers based on a heat build-up protocol. MATEC Web of Conferences. 2018;165
Dejaeghere L, Pierre T, Le Masson P, Courtois M, Carin M. Design and development of an induction furnace to characterize molten metals at high temperatures. High Temperatures-High Pressures. 2018;47(1):23-49.
Dhondt M, Shubina V, Homette R, Arbab-Chirani S, Calloch S. Effect of mechanical (monotonic and cyclic) stress on the corrosion resistance of chromium-plated steel rods. Procedia Engineering. 2018;213:598-605.
Desvaux M, Multon B, Ben Hamed H, Sire S. Magneto-mechanical analysis of magnetic gear pole pieces ring from analytical models for wind turbine applications. Wind Engineering. 2018;42(4):276-285.
Dussud C, Hudec C, George M, Fabre P, Higgs P, Bruzaud S et al. Colonization of non-biodegradable and biodegradable plastics by marine microorganisms. Frontiers in Microbiology. 2018;9:1571.
Amirat Y, Feld G, Elbouchikhi E, Le Gall F, Benbouzid M. Batterie alternative. La Revue 3E.I. 2018..
Chevalier V, Pino L, Arbab Chirani R, Calloch S, Arbab-Chirani S. Experimental Validation of Numerical Simulations of a New-Generation NiTi Endodontic File Under Bending. Journal of Materials Engineering and Performance. 2018..
Clausse D, Lanoiselle J, Pezron I, Saleh K. Formulation of a water-in-oil emulsion encapsulating polysaccharides to improve the efficiency of spraying of plant protection products. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2018;536:96-103.
Van G, Carron D, Le Masson P, Robin V, Andrieu A, Stodolna J. Effect of Boron Content on Hot Ductility and Hot Cracking Susceptibility in 316L Austenitic Stainless Steel for Welding Components. Journal of Materials Engineering and Performance. 2018;27(10):5114-5123.
Baley C, Goudenhooft C, Gibaud M, Bourmaud A. Flax stems from a specific architecture to an instructive model for bioinspired composite structures. Bioinspiration and Biomimetics. 2018;13(2)
Muthuraj R, Sachan A, Castro M, Feller J, Seantier B, Grohens Y. Vapor and Pressure Sensors Based on Cellulose Nanofibers and Carbon Nanotubes Aerogel with Thermoelectric Properties. Journal of Renewable Materials. 2018;6(3):277-287.
Raimbaud Q, Monloubou M, Kerampran S, Cantat I. Foam film / shock wave interaction. 2018..
Neto D, Martins J, Cunha P, Alves J, Oliveira M, Laurent H et al. Investigation of the progressive hot die stamping of a complex boron steel part using numerical simulations and Gleeble tests. International Journal of Advanced Manufacturing Technology. 2018;99(1-4):803-817.
Nag-Chowdhury S, Bellegou H, Pillin I, Castro M, Longrais P, Feller J. Interfacial nanocomposite sensors (sQRS) for the core monitoring of polymer composites' fatigue and damage analysis. Nanocomposites. 2018;4(3):69-79.
Taleb K, Pillin I, Grohens Y, Saidi-Besbes S. Gemini surfactant modified clays Effect of surfactant loading and spacer length. Applied Clay Science. 2018;161:48-56.
Chaudemanche S, Perrot A, Pimbert S, Lecompte T, Faure F. Properties of an industrial extruded HDPE-WPC The effect of the size distribution of wood flour particles. Construction and Building Materials. 2018;162:543-552.
Seo S, Mastiani M, Mosavati B, Peters D, Mandin P, Kim M. Performance evaluation of environmentally benign nonionic biosurfactant for enhanced oil recovery. Fuel. 2018;234:48-55.
Perrot A, Rangeard D, Lecompte T. Field-oriented tests to evaluate the workability of cob and adobe. Materials and structures. 2018;51(2):54.
Elishakoff I, Hache F, Challamel N. Comparison of Refined Beam Theories for Parametric Instability. AIAA Journal. 2018;56(1):438-442.
Lowke D, Dini E, Perrot A, Weger D, Gehlen C, Dillenburger B. Particle-bed 3D printing in concrete construction - Possibilities and challenges. Cement and Concrete Research. 2018;112:50-65.
Gibeaux S, Thomachot-Schneider C, Eyssautier-Chuine S, Marin B, Vazquez P. Simulation of acid weathering on natural and artificial building stones according to the current atmospheric SO<sub>2</sub>/NO<sub>x</sub> rate. Environmental Earth Sciences. 2018;77(9):327.
Kedzierski M, Jonathan V, Falcou-Préfol M, Kerros M, Pedrotti M, Bruzaud S. Advances in high throughput analysis of microplastics. 2018..
Di Cesare N, Corvec G, Balandraud X, Le Cam J, Gauffreteau J. Mechanical and thermomechanical characterization of different leathers. 2018;7:63-68.
Donnard A, Guerard S, Maheo L, Viot P, Rio G. Multiaxial experiments with radial loading paths on a polymeric foam. Polymer Testing. 2018;67:441-449.
Nachtane M, Tarfaoui M, Hilmi K, Saifaoui D, El Moumen A. Assessment of Energy Production Potential from Tidal Stream Currents in Morocco. Energies. 2018;11(5):1065.
Atashipour S, Girhammar U, Challamel N. A weak shear web model for deflection analysis of deep composite box-type beams. Engineering Structures. 2018;155:36-49.
Alil L, Arrigoni M, Badea S, Ginghina R, Matache L, Mostovykh P. Ballistic study of Tensylon®-based panels. Express Polymer Letters. 2018;12(6):491-504.
Costa M, Viana G, Créac'Hcadec R, da Silva L, Campilho R. A cohesive zone element for mode I modelling of adhesives degraded by humidity and fatigue. International Journal of Fatigue. 2018;112:173-182.
Coer J, Laurent H, Oliveira M, Manach P, Menezes L. Detailed experimental and numerical analysis of a cylindrical cup deep drawing Pros and cons of using solid-shell elements. International Journal of Material Forming. 2018;11(3):357-373.
Luo S, Castany P, Thuillier S, Huot M. Spatiotemporal characteristics of Portevin-Le Chatelier effect in Ti-Mo alloys under thermo-mechanical loading. Materials Science and Engineering: A. 2018;733:137-143.
Dib W, Blès G, Blaise A, Tourabi A. Modelling of cyclic visco-elasto-plastic behaviour of coated woven fabrics under biaxial loading and finite strain. International Journal of Solids and Structures. 2018;154:147-167.
Abbott B, Abbott R, Abbott T, Abernathy M, Acernese F, Ackley K et al. Erratum: “First Search for Gravitational Waves from Known Pulsars with Advanced LIGO” (2017, ApJ, 839, 12). The Astrophysical Journal. 2017;851(1):71.
Chikh A, Zembouai I, Kaci M, Bruzaud S. Polymer processing society 33th annual meeting. 2017..
Elbouchikhi E, Choqueuse V, Auger F, Benbouzid M. Motor Current Signal Analysis Based on a Matched Subspace Detector. IEEE Transactions on Instrumentation and Measurement. 2017;66(12):3260-3270.
Morvan A, Scolan Y. Impact hydrodynamique bidimensionnel d'un corps parabolique sur une houle d'Airy reguliere. La Houille Blanche - Revue internationale de l'eau. 2017;103(6):49-56.
Dutournié P, Limousy L, Anquetil J, Déon S. Modification of the Selectivity Properties of Tubular Ceramic Membranes after Alkaline Treatment. Membranes. 2017;7(4):65.
Alil C, Arrigoni M, Badea M, Barbu C, Istrate M, Mostovykh P. On the Constitutive Law for the Mechanical Quasi-static Response of Criss-Cross Composites (on the Example of UHMWPE). Human Factors and Mechanical Engineering for Defense and Safety. 2017;1(1)
Saoud K, Le Grognec P. Post-buckling analysis of elastoplastic sandwich columns by means of an enriched 1D finite element model. International Journal of Solids and Structures. 2017;129:90-102.
Rahmaoui F, Mederic P, Aït Hocine N, Aït Saada A, Poirot N, Belaidi I. Contribution of the organo-montmorillonite/graphene pair to the rheological and mechanical properties of polyethylene matrix based nanocomposites. Applied Clay Science. 2017;150:244-251.
Bernard C, Keryvin V, Doquet V, Hin S, Yokoyama Y. A sequential pre-cracking procedure to measure the mode-I fracture toughness of ultra pure bulk metallic glasses. Scripta Materialia. 2017;141:58-61.
Lemechko P, Chikh A, Zembouai I, Le Fellic M, Elain A, Kaci M et al. 46ème Colloque National du Groupe Français des Polymères. 2017..
Arbaoui Y, Niemiec R, Agaciak P, Fernez N, Ville J, Burgnies L et al. Apport de la structuration de composites ferromagnétiques pour l’absorption hyperfréquence. 2017..
Lerbet J, Challamel N, Nicot F, Darve F. Geometric degree of non conservativeness. 2017;10589:355--358.
Pierre A, Weger D, Perrot A, Lowke D. Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study. Materials and structures. 2017;51(1)
Gallegos Mayorga L, Sire S, Correia J, de Jesus A, Rebelo C, Fernández-Canteli A et al. Statistical evaluation of fatigue strength of double shear riveted connections and crack growth rates of materials from old bridges. Engineering Fracture Mechanics. 2017;185:241-257.
Amirat Y, Oubrahim Z, Feld G, Benbouzid M. Phasor estimation for power quality monitoring: Least square versus Kalman filter. 2017;4339-4343.
Elbouchikhi E, Choqueuse V, Feld G, Amirat Y, Benbouzid M. A symmetrical components-based load oscillation detection method for closed-loop controlled induction motors. 2017;8047-8052.
Amirat Y, Feld G, Elbouchikhi E, Benbouzid M, Kermarrec H, Ruiz N et al. Design and applications of a tidal turbine emulator based on a PMSG for remote load. 2017;2437-2441.
Choqueuse V, Elbouchikhi E, Oubrahim Z, Benbouzid M. On the use of phase diversity for spectral estimation in current signature analysis. 2017;8093-8098.
Le Corvec M, Jezequel C, Monbet V, Fatih N, Charpentier F, Tariel H et al. Mid-infrared spectroscopy of serum, a promising non-invasive method to assess prognosis in patients with ascites and cirrhosis. PLoS ONE. 2017;12(10):e0185997.
Desplats H, Brisson E, Rogeon P, Carré P, Bonhomme A. Pressureless sintering behavior and properties of Ag–SnO 2. Rare Metals. 2017;38(1):35-41.
Challamel N. Calcul à la rupture appliqué à la coupe de géomatériaux. Revue française de Géotechnique. 2017;:75-83.
Duport C, Maison A, Nême A, Leroux J, Roncin K, Jochum C et al. Kite as a Beam Modelling Approach: Assessment by Finite Element Analysis. 2017..
http://awec2017.com/
Desvaux M, Multon B, Ben Ahmed H, Sire S. Behaviour comparison between mechanical epicyclic gears and magnetic gears. 2017;54:401-410.
Rokbani M, Saint-Sulpice L, Chirani S, Bouraoui T. Hydrogen effects on Ni-Ti fatigue performance by self -heating method. Smart Materials and Structures. 2017;26(10):105016.
Fourestier G, Santagostini T, Le Boulluec M, Magaldi P, Scolan Y. Modélisation expérimentale et numérique d'un tourbillon de vidange avec injection en régime super-critique. La Houille Blanche - Revue internationale de l'eau. 2017;:35-41.
Wijesekara I, Lang M, Marty C, Gemin M, Boulho R, Douzenel P et al. Different extraction procedures and analysis of protein from Ulva sp. in Brittany, France. Journal of Applied Phycology. 2017;29(5):2503-2511.
Vales B, Marguet S, Créac'Hcadec R, Sohier L, Ferrero J, Navarro P. Experimental & numerical study of the Tensile/Compression-Shear Arcan test under dynamic loading. International Journal of Adhesion and Adhesives. 2017;78:135-147.
Rokbani M, Saint-Sulpice L, Bouraoui T, Arbab-Chirani S. Hydrogen effects on Ni-Ti fatigue performance by self -heating method. Smart Materials and Structures. 2017;26(10)
Jansen Y, Logé R, Manach P, Carbuccia G, Milesi M. On the benefits of a stress criterion for the simulation of cup drawing process. International Journal of Material Forming. 2017;10(5):707–716.
Kedzierski M, Le Tilly V, Bourseau P, Bellegou H, Cesar G, Sire O et al. Challenging the Microplastic Extraction from Sandy Sediments. 2017;59-65.
Hesami M, Pino L, Saint-Sulpice L, Legrand V, Kadkhodaei M, Arbab Chirani S et al. Rotary bending fatigue analysis of shape memory alloys. Journal of Intelligent Material Systems and Structures. 2017;29(6):1183-1195.
Pecenko R, Picandet V, Colinart T, Challamel N. Coupled heat and moisture transfer: Some (semi-)analytical solutions. 2017..
Diakhaté M, Moutou Pitti R, Angellier N, Bastidas-Arteaga E, Hamdi S. Acoustic Emission Technique to monitor real-time wood fracture properties in room temperature. 2017..
Chikh A, Zembouai I, Kaci M, Bruzaud S. 6th international conference on biobased and biodegradable polymers. 2017..
El Moumen A, Tarfaoui M, Lafdi K, Ben Yahia H. Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact. Composites Part B: Engineering. 2017;125:1-8.
Bourguille J, Bergamasco L, Tahan G, Fuster D, Arrigoni M. Shock Propagation Effects in Multilayer Assembly Including a Liquid Phase. Key Engineering Materials. 2017;755:181-189.
Lerbet J, Challamel N, Nicot F, Darve F. On the stability of nonconservative continuous systems under kinematic constraints. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik. 2017;97(9):1100--1119.
Larcher M, Arrigoni M, Bedon C, van Doormaal A, Haberacker C, Hüsken G et al. Recommendations for a New Generation of Standards for Testing Numerical Assessment of Blast-Loaded Glass Windows. Key Engineering Materials. 2017;755:121-130.
Kocsis A, Challamel N, Károlyi G. Discrete and nonlocal models of Engesser and Haringx elastica. International Journal of Mechanical Sciences. 2017;130:571-585.
Glanowski T, Le Saux V, Doudard C, Marco Y, Champy C, Charrier P. Proposition of an uncoupled approach for the identification of cyclic heat sources from temperature fields in the presence of large strains. Continuum Mechanics and Thermodynamics. 2017;29(5):1163-1179.
Zorica D, Challamel N, Janev M, Atanacković T. Buckling and Postbuckling of a Heavy Compressed Nanorod on Elastic Foundation. Journal of Nanomechanics and Micromechanics. 2017;7(3)
Dolo G, Férec J, Cartié D, Grohens Y, Ausias G. Model for thermal degradation of carbon fiber filled poly(ether ether ketone). Polymer Degradation and Stability. 2017;143:20-25.
Serrano L, Marco Y, Le Saux V, Robert G, Charrier P. Fast prediction of the fatigue behavior of short-fiber-reinforced thermoplastics based on heat build-up measurements: application to heterogeneous cases. Continuum Mechanics and Thermodynamics. 2017;29(5):1113-1133.
Grinnaert F, Billard J, Laurens J. An energy analysis of parametric roll for application to the second generation intact stability criteria. Journal of Marine Science and Technology. 2017;22(3):587-600.
Falcou-Préfol M, Kedzierski M, Jonathan V, Keros M, Elineau A, Pedrotti M et al. Statistical Methodology for Identifying Microplastic Samples Collected During TARA Mediterranean Campaign. 2017..
Martins J, Neto D, Alves J, Oliveira M, Laurent H, Andrade-Campos A et al. A new staggered algorithm for thermomechanical coupled problems. International Journal of Solids and Structures. 2017;122-123:42-58.
Barati M, Saint-Sulpice L, Arbab-Chirani S, Calloch S, Arbab Chirani S. Influence d'un chargement thermomécanique cyclique sur les propriétés d'un alliage à mémoire de forme. 2017..
Alarcón E, Saint-Sulpice L, Heller L, Arbab-Chirani S, Calloch S, Šittner P. Fatigue et auto-échauffement d'alliages à mémoire de forme en NiTi avec ou sans R-phase. 2017..
Le Pavic J, Stamoulis G, Bonnemains T, da Silva D, Thevenet D. Determination of the failure load of adhesive bonding by using a coupled criterion. 2017..
Gao Y, Asserin O, Ayrault D, Fandeur O, Fandeur O, Robidet R et al. Fissuration à chaud en soudage d'un acier inoxydable austénitique. 2017..
Jérémy L, Stamoulis G, Bonnemains T, Da S, Thevenet D. Etude de la rupture des assemblages collés par l'utilisation d'un critère couplé. 2017..
Dhondt M, Shubina Helbert V, Homette R, Arbab-Chirani S, Calloch S. Effet d'une sollicitation mécanique sur la tenue à la corrosion de tiges en acier chromées. 2017..
Laurent H, Boyer A, Demazel N, Carin M, Le M, Glock F et al. Un dispositif d'essai d'expansion biaxiale à très hautes températures. 2017..
Demmouche Y, Helbert G, Arbab-Chirani S, Calloch S. ETUDE DE LA FATIGUE A FROID D'UN ACIER iTRIP 304L. 2017..
Beuguel Q, Ville J, Crepin-Leblond J, Mederic P, Aubry T. Influence of formulation on morphology and rheology of polypropylene/polyamide blends filled with nanoclay mineral particles. Applied Clay Science. 2017;147:168-175.
Ben Yahia H, Tarfaoui M, Datsyuk V, El Moumen A, Trotsenko S, Reich S. Dynamic properties of hybrid composite structures based multiwalled carbon nanotubes. Composites Science and Technology. 2017;148:70-79.
Scolan Y. Breaking waves in tank. 2017..
Viéville E, Laurent H, Rio G, Omnes B, Lejeune H. Experimental and Numerical Investigations on Exfoliated Graphite Seals. 2017..
Mandin P, Lemée Y, Karaboue L, Boy V, Lendormi T, Lanoiselle J. Numerical modelling of pulsed electric fields for sustainable bio-methane production. 2017..
Bal J, Beuvier T, Chapel J, Delorme N, Gibaud A, Grohens Y et al. STABILITY, GLASS TRANSITION TEMPERATURE AND DENSITY OF THIN POLYMER FILMS: ROLE OF THE INTERFACES. 2017..
Corbel C, Sartini S, Levati E, Colas P, Maillet L, Couturier C et al. Screening for Protein-Protein Interaction Inhibitors Using a Bioluminescence Resonance Energy Transfer (BRET)–Based Assay in Yeast. Slas Discovery. 2017;22(6):751-759.
Elishakoff I, Hache F, Challamel N. Vibrations of asymptotically and variationally based Uflyand-Mindlin plate models. International Journal of Engineering Science. 2017;116:58-73.
Marco Y, Masquelier I, Le Saux V, Charrier P. Fast prediction of the Wöhler curve from thermal measurements for a wide range of NR and SBR compounds. Rubber Chemistry and Technology. 2017;90(3):487-507.
Balze R, Bigi N, Roncin K, Leroux J, Nême A, Keryvin V et al. Racing yacht appendages optimization using fluid-structure interactions. 2017..
Bigi N, Podeur V, Roncin K, Leroux J, Nême A, Jochum C et al. Maneuvering modelling of ship towed by kite in a seaway. 2017..
van Baarsel T, Roux P, Nicolas B, Mars J, Bonnel J, Arrigoni M. Dynamic imaging of a gravity wave caused by laser-induced breakdown in a fluid waveguide using acoustic waves. 2017;141(5):3589-3589.
Oubrahim Z, Choqueuse V, Amirat Y, Benbouzid M. Disturbances Classification based on a Model Order Selection Method for Power Quality Monitoring. IEEE Transactions on Industrial Electronics. 2017..
Nachtane M, Tarfaoui M, El Moumen A, Saifaoui D. Damage prediction of horizontal axis marine current turbines under hydrodynamic, hydrostatic and impacts loads. Composite Structures. 2017;170:146-157.
Diakhaté M, Angellier N, Moutou Pitti R, Dubois F. On the crack tip propagation monitoring within wood material: Cluster analysis of acoustic emission data compared with numericamodelling. Construction and Building Materials. 2017;156:911-920.
Ruocco E, Wang C, Zhang H, Challamel N. An approximate model for optimizing Bernoulli columns against buckling. Engineering Structures. 2017;141:316-327.
Diakhaté M, Bastidas-Arteaga E, Moutou Pitti R, Schoefs F. Cluster analysis of acoustic emission activity within wood material: Towards a real-time monitoring of crack tip propagation. Engineering Fracture Mechanics. 2017;180:254-267.
Do V, Le Grognec P. Buckling analysis of a reinforced sandwich column using the Bloch wave theory. Thin-Walled Structures. 2017;115:323-335.
Balze R, Bigi N, Roncin K, Leroux J, Nême A, Keryvin V et al. An innovative tool to study and optimize racing yacht appendages using fluid structure interactions. 2017;616-624.
Mercier S, Sartori C, Jacques N, Molinari A. Dynamic flow surface of porous materials containing spheroidal void shape. 2017..
Mandin P, Humphry A, Peres L, Le Brigant Q, Astier F. Étude d’une batterie à plomb. 2017..
Karaboue L, Mandin P, Lemee Y, Liu X, Lanoiselle J, Boy V et al. TRAITEMENT PAR CHAMPS ÉLECTRIQUES PULSÉS (CEP) DES INTRANTS DE MÉTHANISATION. 2017..
Karaboue L, Mandin P, Lemée Y, Boy V, Lendormi T, Lanoiselle J. Numerical modelling of pulsed electric fields for sustainable bio-methane production. 2017..
Mandin P, Landreau M, Ndiaye N, Evans J, Kim M. Numerical modelling of the electro-refining electrolysers performances. 2017..
Hassoon O, Tarfaoui M, El Moumen A. Progressive damage modeling in laminate composites under slamming impact water for naval applications. Composite Structures. 2017;167:178-190.
Tchalla S, Le Gac P, Maurin R, Créac'Hcadec R. Polychloroprene behaviour in a marine environment: role of silica fillers. Polymer Degradation and Stability. 2017;139:28-37.
Gallegos Mayorga L, Sire S, Ragueneau M, Plu B. Understanding the behaviour of wrought-iron riveted assemblies: manufacture and testing in France. Proceedings of the Institution of Civil Engineers - Engineering History and Heritage. 2017;170(2):67-79.
Arbaoui Y, Agaciak P, Chevalier A, Laur V, Maalouf A, Ville J et al. 3D printed ferromagnetic composites for microwave applications. Journal of Materials Science. 2017;52(9):4988-4996.
Levieil B, Bridier F, Doudard C, Thevenet D, Calloch S, Ezanno A. Numerical simulation of low cycle fatigue behavior of welded joints for naval applications: influence of residual stresses. Welding in the World. 2017;61(3):551-561.
Nicolas V, Glouannec P, Ploteau P, Salagnac P, Jury V. Experiment and multiphysic simulation of dough baking by convection, infrared radiation and direct conduction. International Journal of Thermal Sciences. 2017;115:65-78.
Angellier N, Dubois F, Moutou Pitti R, Diakhaté M, Adjovi Loko R. Influence of hygrothermal effects in the fracture process in wood under creep loading. Engineering Fracture Mechanics. 2017;177:153-166.
van Ruymbeke B, Murai Y, Tasaka Y, Oishi Y, Gabillet C, Colin C et al. Quantitative visualization of swirl and cloud bubbles in Taylor–Couette flow. Journal of Visualization. 2017;20(2):349-358.
Messin T, Follain N, Guinault A, Miquelard-Garnier G, Sollogoub C, Delpouve N et al. Confinement effect in PC/MXD6 multilayer films: Impact of the nanolayered structure on gas barrier properties of MXD6. 2017..
Nachtane M, Tarfaoui M, Saifaoui D, Karim H. Resource assessment of tidal stream energy in Morocco. 2017..
Simoes V, Oliveira M, Neto D, Cunha P, Laurent H, Alves J et al. Numerical study of springback using the split-ring test influence of the clearance between the die and the punch. International Journal of Material Forming. 2017;11(2):325-337.
Toumi S, Benelghali S, Trabelsi M, Elbouchikhi E, Amirat Y, Benbouzid M et al. Modeling and Simulation of a PMSG-based Marine Current Turbine System under Faulty Rectifier Conditions. Electric Power Components and Systems. 2017;45(7):715-725.
Toumi S, Ben Elghali S, Trabelsi M, Elbouchikhi E, Amirat Y, Benbouzid M et al. Modeling and Simulation of a PMSG-based Marine Current Turbine System under Faulty Rectifier Conditions. Electric Power Components and Systems. 2017;45(7):715-725.
Desvaux M, Multon B, Ben Ahmed H, Sire S, Fasquelle A, Laloy D. Gear ratio optimization of a full magnetic indirect drive chain for wind turbine applications. 2017;1-9.
Elhannani M, Madani K, Chama Z, Legrand E, Touzain S, Feaugas X. Influence of the presence of defects on the adhesive layer for the single-lap bonded joint—Part II: Probabilistic assessment of the critical state. Aerospace Science and Technology. 2017;63:372-386.
Elhimer M, Jacques N, El Malki Alaoui A, Gabillet C. The influence of aeration and compressibility on slamming loads during cone water entry. Journal of Fluids and Structures. 2017;70:24-46.
El Moumen A, Tarfaoui M, Lafdi K. Mechanical characterization of carbon nanotubes based polymer composites using indentation tests. Composites Part B: Engineering. 2017;114:1-7.
Tavernier-Tardy E, Cornillon J, Molucon-Chabrot C, Cahn J, Tinquaut F, Bourmaud A et al. A phase 1/2 trial of lenalidomide and dexamethasone in adult patients with refractory/relapsed acute lymphoblastic leukemia. Hematology. 2017;22(4):217-223.
Zhang H, Wang C, Challamel N, Ruocco E. Semi-analytical solutions for optimal design of columns based on Hencky bar-chain model. Engineering Structures. 2017;136:87-99.
Sukiman M, Kanit T, N'Guyen F, Imad A, El Moumen A, Erchiqui F. Effective thermal and mechanical properties of randomly oriented short and long fiber composites. Mechanics of Materials. 2017;107:56-70.
Manière C, Durand L, Brisson E, Desplats H, Carré P, Rogeon P et al. Contact resistances in spark plasma sintering: From in-situ and ex-situ determinations to an extended model for the scale up of the process. Journal of the European Ceramic Society. 2017;vol. 37(n° 4):pp. 1593-1605.
Michel B, Glouannec P, Fuentes A, Chauvelon P. Experimental and numerical study of insulation walls containing a composite layer of PU-PCM and dedicated to refrigerated vehicle. Applied Thermal Engineering. 2017;116:382-391.
Bensadoun F, Verpoest I, Baets J, Muessig J, Graupner N, Davies P et al. Impregnated fibre bundle test for natural fibres used in composites. Journal of Reinforced Plastics and Composites. 2017;36(13):942-957.
Laur V, Arbaoui Y, Agaciak P, Azar M, Chevalier A, Ville J et al. Fused Deposition Modeling for Microwave Applications – Materials Properties and Future Needs. 2017..
Hache F, Challamel N, Elishakoff I, Wang C. Comparison of nonlocal continualization schemes for lattice beams and plates. Archive of Applied Mechanics. 2017;87(7):1105-1138.
Tarfaoui M, El Moumen A, Lafdi K. Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites. Composites Part B: Engineering. 2017;112:185-195.
Elishakoff I, Hache F, Challamel N. Critical contrasting of three versions of vibrating Bresse-Timoshenko beam with a crack. International Journal of Solids and Structures. 2017;109:143-151.
Arnould O, Siniscalco D, Bourmaud A, Le Duigou A, Baley C. Better insight into the nano-mechanical properties of flax fibre cell walls. Industrial Crops and Products. 2017;97:224-228.
Amziane S, Perrot A. The plate test carried out on fresh cement-based materials:How and why? Cement and Concrete Research. 2017;93:1-7.
Scolan Y, Brosset L. Numerical simulation of highly nonlinear sloshing in a tank due to forced motion. International Journal of Offshore and Polar Engineering (IJOPE). 2017;27(1):11-17.
https://www.onepetro.org/journal-paper/ISOPE-17-27-1-011
Desvaux M, Multon B, Ben Ahmed H, Sire S, Le Goff Latimier R, Traullé B. Computation Time Analysis of the Magnetic Gear Analytical Model. IEEE Transactions on Magnetics. 2017..
Beena Unni A, Vignaud G, Bal J, Delorme N, Beuvier T, Thomas S et al. Density variations of polymer thin films studied by nanoparticle adsorption. 2017..
Thomsen K, Murray A, Buylaert J, Jain M, Hansen J, Aubry T et al. Reply to: “A response to some unwarranted criticisms of single-grain dating” by J.K. Feathers. Quaternary Geochronology. 2017;37:8-14.
Puspita M, Déniel M, Widowati I, Radjasa O, Douzenel P, Bedoux G et al. Antioxidant and antibacterial activity of solid-liquid and enzyme-assisted extraction of phenolic compound from three species of tropical Sargassum. Journal of Physics: Conference Series. 2017;55:012057.
Alarcon E, Heller L, Arbab-Chirani S, Sittner P, Kopeček J, Saint-Sulpice L et al. Fatigue performance of superelastic NiTi near stress-induced martensitic transformation. International Journal of Fatigue. 2017;95:76-89.
Alarcon E, Heller L, Chirani S, Šittner P, Kopeček J, Saint-Sulpice L et al. Fatigue performance of superelastic NiTi near stress-induced martensitic transformation. International Journal of Fatigue. 2017;95:76-89.
Atashipour S, Girhammar U, Challamel N. Stability analysis of three-layer shear deformable partial composite columns. International Journal of Solids and Structures. 2017;106:213-228.
Helbert G, Saint-Sulpice L, Arbab-Chirani S, Dieng L, Lecompte T, Calloch S et al. A uniaxial constitutive model for superelastic NiTi SMA including R-phase and martensite transformations and thermal effects. Smart Materials and Structures. 2017;26(2):025007.
El Bouchikhi E, Choqueuse V, Amirat Y, Benbouzid M. An Efficient Hilbert–Huang Transform-Based Bearing Faults Detection in Induction Machines. IEEE Transactions on Energy Conversion. 2017;32(2):401-413.
http://ieeexplore.ieee.org/document/7837690/
Mandin P, Astier F, Boyer G, Merdrignac-Conanec O, Noiret N. Experimental and numerical study of small lead acid batteries regeneration. ECS Transactions. 2017;75(37):9-13.
Unni A, Vignaud G, Chapel J, Giermanska J, Bal J, Delorme N et al. Probing the Density Variation of Confined Polymer Thin Films via Simple Model-Independent Nanoparticle Adsorption. Macromolecules. 2017;50:pp. 1027-1036.
Kedzierski M, Le Tilly V, Bourseau P, Bellegou H, César G, Sire O et al. Microplastics elutriation system. Part A: Numerical modeling. Marine Pollution Bulletin. 2017;119(2):151-161.
Jimenez-Saelices C, Seantier B, Cathala B, Grohens Y. Effect of freeze-drying parameters on the microstructure and thermal insulating properties of nanofibrillated cellulose aerogels. Journal of Sol-Gel Science and Technology. 2017;84(3):475-485.
Diakhaté M, Tual N, Carrère N, Davies P. Cracking and durability of composites in a marine environment. 2017;1-8.
Balandier C, Joliot C, Ménager M, Vouve F, Vieillescazes C. Chemical analyses of Roman wall paintings recently found in Paphos, Cyprus: The complementarity of archaeological and chemical studies. Journal of Archaeological Science: Reports. 2017;14:332-339.
Adzima F, Balan T, Manach P, Bonnet N, Tabourot L. Crystal plasticity and phenomenological approaches for the simulation of deformation behavior in thin copper alloy sheets. International Journal of Plasticity. 2017;94:171-191.
Keryvin V, Charleux L, Hin R, Sangleboeuf J, Guin J. Mechanical behaviour of fully densified silica glass under Vickers indentation. Acta Materialia. 2017;129:492--499.
Pham C, Adzima F, Coer J, Manach P. Anti-Buckling Device for Ultra-Thin Metallic Sheets Under Large and Reversed Shear Strain Paths. Experimental Mechanics. 2017;57(4):593-602.
Gopakumar D, Pasquini D, Henrique M, de Morais L, Grohens Y, Thomas S. Meldrum's Acid Modified Cellulose Nanofiber-Based Polyvinylidene Fluoride Microfiltration Membrane for Dye Water Treatment and Nanoparticle Removal. ACS Sustainable Chemistry & Engineering. 2017;5(2):2026-2033.
Souto N, Andrade-Campos A, Thuillier S. Mechanical design of a heterogeneous test for material parameters identification. International Journal of Material Forming. 2017;10(3):353-367.
Taleb K, Mohamed-Benkada M, Benhamed N, Saidi-Besbes S, Grohens Y, Derdour A. Benzene ring containing cationic gemini surfactants: Synthesis, surface properties and antibacterial activity. Journal of Molecular Liquids. 2017;241:81-90.
Nochehdehi A, Thomas S, Sadri M, Hadavi S, Grohens Y, Kalarikkal N et al. Fe, Co Based Bio-Magnetic Nanoparticles (BMNPs): Synthesis, Characterization, and Biomedical Application. 2017;157-196.
Le Fur Bonnabesse A, Bodéré C, Hélou C, Chevalier V, Goulet J. Dental pain induced by an ambient thermal differential: pathophysiological hypothesis. Journal of Pain Research. 2017;10:2845-2851.
Jimenez-Saelices C, Saentier B, Cathala B, Grohens Y. Nanocellulose aerogels with thermal superinsulating properties obtained by spray freeze-drying. Abstracts of Papers of the American Chemical Society. 2017;253
Scida D, Bourmaud A, Baley C. Influence of the scattering of flax fibres properties on flax/epoxy woven ply stiffness. Materials & Design. 2017;122:136-145.
Parameswaranpillai J, Ramanan S, Jose S, Siengchin S, Magueresse A, Janke A et al. Shape Memory Properties of Epoxy/PPO-PEO-PPO Triblock Copolymer Blends with Tunable Thermal Transitions and Mechanical Characteristics. Industrial and engineering chemistry research. 2017;56(47):14069-14077.
Claude B, Duigou L, Girault G, Cadou J. Eigensolutions to a vibroacoustic interior coupled problem with a perturbation method. Comptes Rendus. Mécanique. 2017;345(2):130-136.
Rothan A, Muller R, Hebraud P, Castro M, Bouquey M, Serra C. Unusual time dependent rheological behavior of a concentrated suspension. Applied Rheology. 2017;27(6):64182.
Jimenez Saelices C, Seantier B, Cathala B, Grohens Y. Spray freeze-dried nanofibrillated cellulose aerogels with thermal superinsulating properties. Carbohydrate Polymers. 2017;157:105-113.
Allanic N, Le Bideau P, Glouannec P, Deterre R. An experimental study on infrared drying kinetics of an aqueous adhesive supported by polymer composite. Heat and Mass Transfer. 2017;53(1):223-231.
Chikhaoui K, Bouhaddi N, Kacem N, Guedri M, Soula M. Uncertainty quantification/propagation in nonlinear models: robust reduction - generalized polynomial chaos. Engineering Computations. 2017;34(4):1082-1106.
El Achkar J, Lendormi T, Hobaika Z, Salameh D, Louka N, Maroun R et al. Anaerobic digestion of nine varieties of grape pomace: Correlation between biochemical composition and methane production. Biomass and Bioenergy. 2017;107:335-344.
Pierre T, Jimenez Saelices C, Seantier B, Grohens Y. Transient pulsed technique to characterize the radiative and conductive properties of bio aerogels. International Journal of Thermal Sciences. 2017;116:63-72.
Lecompte T, Perrot A. Non-linear modeling of yield stress increase due to SCC structural build-up at rest. Cement and Concrete Research. 2017;92:92-97.
Le Duigou A, Merotte J, Bourmaud A, Davies P, Belhouli K, Baley C. Hygroscopic expansion: A key point to describe natural fibre/polymer matrix interface bond strength. Composites Science and Technology. 2017;151:228-233.
Lecompte T, Le Duigou A. Mechanics of straw bales for building applications. Journal of Building Engineering. 2017;9:84-90.
Wang C, Zhang H, Challamel N, Duan W. On boundary conditions for buckling and vibration of nonlocal beams. European Journal of Mechanics - A/Solids. 2017;61:73-81.
Belmoujahid Y, Challamel N, Picandet V. Propagation locale et non-locale de la chaleur dans un barreau hétérogène. Academic Journal of Civil Engineering. 2017..
Boy V, Roux De-Balmann H, Galier S. How do ions enhance the transfer during nanofiltration of saccharides? Experimental assessment of the dehydration assumption. Canadian Journal of Chemical Engineering. 2017;95(5):974-984.
Férec J, Bertevas E, Khoo B, Ausias G, Phan-Thien N. A rheological constitutive model for semiconcentrated rod suspensions in Bingham fluids. Physics of Fluids. 2017;29(7):073103.
Wang C, Zhang H, Challamel N, Duan W. Eringen’s small length scale coefficient for vibration of axially loaded nonlocal Euler beams with elastic end restraints. Journal of Modeling in Mechanics and Materials. 2017;1(2):20160158.
Gourier C, Bourmaud A, Le Duigou A, Baley C. Influence of PA11 and PP thermoplastic polymers on recycling stability of unidirectional flax fibre reinforced biocomposites. Polymer Degradation and Stability. 2017;136:1-9.
Chikh A, Benhamida A, Kaci M, Bourmaud A, Bruzaud S. Recyclability assessment of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(butylene succinate) blends: Combined influence of sepiolite and compatibilizer. Polymer Degradation and Stability. 2017;142:234-243.
Primel A, Férec J, Ausias G, Tirel Y, Veille J, Grohens Y. Solubility and interfacial tension of thermoplastic polyurethane melt in supercritical carbon dioxide and nitrogen. Journal of Supercritical Fluids. 2017;122:52-57.
Bidi L, Le Masson P, Cicala E, Primault C. Experimental design method to the weld bead geometry optimization for hybrid laser-MAG welding in a narrow chamfer configuration. Optics and Laser Technology. 2017;89:114-125.
Nasri E, Machreki M, Beltifa A, Aroui S, Ghorbel A, Saad A et al. Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization. Environmental Science and Pollution Research. 2017;24(25):20422-20428.
Michel X, Fouquay S, Michaud G, Simon F, Brusson J, Roquefort P et al. Tuning the properties of α,ω-bis(trialkoxysilyl) telechelic copolyolefins from ruthenium-catalyzed chain-transfer ring-opening metathesis polymerization (ROMP). Polymer Chemistry. 2017;8(7):1177--1187.
Bourmaud A, Malvestio J, Lenoir N, Siniscalco D, Habrant A, King A et al. Exploring the mechanical performance and in-planta architecture of secondary hemp fibres. Industrial Crops and Products. 2017;108:1-5.
Cochet J, Thuillier S, Loulou T, Decultot N, Carre P, Manach P. Heat treatment of 34CrNiMo6 steel used for mooring shackles. International Journal of Advanced Manufacturing Technology. 2017;91(5-8):2329-2346.
Le Duigou A, Bourmaud A, Bergeret A, Beigbeder J. Analyse de cycle de vie des biocomposites et gestion de leur fin de vie. 2017;266-310 (Chap. 7).
Hassoon O, Tarfaoui M, El Malki Alaoui A, El Moumen A. Experimental and numerical investigation on the dynamic response of sandwich composite panels under hydrodynamic slamming loads. Composite Structures. 2017;:297-307.
Issaadi K, Pillin I, Habi A, Grohens Y. Synergetic association of grafted PLA and functionalized graphene on the properties of the designed nanocomposites. Polymer Bulletin. 2017;74(4):997-1010.
Parameswaranpillai J, Sidhardhan S, Harikrishnan P, Pionteck J, Siengchin S, Unni A et al. Morphology, thermo-mechanical properties and surface hydrophobicity of nanostructured epoxy thermosets modified with PEO-PPO-PEO triblock copolymer. Polymer Testing. 2017;59:168-176.
Chebil M, Vignaud G, Bal J, Beuvier T, Delorme N, Grohens Y et al. Reversibility in glass transition behavior after erasing stress induced by spin coating process. Polymer. 2017;122:45-51.
Kedzierski M, Le Tilly V, César G, Sire O, Bruzaud S. Efficient microplastics extraction from sand. A cost effective methodology based on sodium iodide recycling. Marine Pollution Bulletin. 2017;115(1-2):120-129.
Cherif G, Kerkour A, Hamachi M, Grohens Y. Effect of Cloisite (R) 30B on the Diffusion of Irganox 1076 in HDPE. Packaging Technology and Science. 2017;30(11):723-733.
Renouard N, Merotte J, Kervoelen A, Behlouli K, Baley C, Bourmaud A. Exploring two innovative recycling ways for poly-(propylene)-flax non wovens wastes. Polymer Degradation and Stability. 2017;142:89-101.
Blel W, Limousy L, Dutournié P, Ponche A, Boucher A, Le Fellic M. Study of the antimicrobial and antifouling properties of different oxide surfaces. Environmental Science and Pollution Research. 2017;24(11):9847-9858.
Farzan H, Loulou T, Sarvari S. Estimation of applied heat flux at the surface of ablating materials by using sequential function specification method. Journal of Mechanical Science and Technology. 2017;31(8):3969-3979.
Bernard C, Coër J, Laurent H, Manach P, Cristina Oliveira M, Menezes L. Influence of Portevin-Le Chatelier Effect on Shear Strain Path Reversal in an Al-Mg Alloy at Room and High Temperatures. Experimental Mechanics. 2017;57(3):405-415.
Toumi S, Amirat Y, Elbouchikhi E, Trabelsi M, Benbouzid M, Faouzi Mimouni M. A comparison of fault-tolerant control strategies for a PMSG-based marine current turbine system under generator side converter faulty conditions. Journal of Electrical Systems. 2017..
Chobaut N, Wagner J, Carron D, Saelzle P, Pirling T, Hofmann M et al. Stress generation during the quenching of large AA2618 forgings: Finite element computations and validation against neutron diffraction measurements. Finite Elements in Analysis and Design. 2017;131:17-24.
Bourmaud A, Dhakal H, Habrant A, Padovani J, Siniscalco D, Ramage M et al. Exploring the potential of waste leaf sheath date palm fibres for composite reinforcement through a structural and mechanical analysis. Composites Part A: Applied Science and Manufacturing. 2017;103:292-303.
Férec J, Bertevas E, Khoo B, Ausias G, Phan-Thien N. Steady-shear rheological properties for suspensions of axisymmetric particles in second-order fluids. Journal of Non-Newtonian Fluid Mechanics. 2017;239:62-72.
Le Grand A, Maxime V, Kedzierski M, Duval H, Douzenel P, Sire O et al. Assessment and monitoring of water quality of the gulf of Morbihan, a littoral ecosystem under high anthropic pressure. Marine Pollution Bulletin. 2017;124(1):74-81.
Pilvin P, Onimus F, Brenner R, Pascal S, Feaugas X, Saï K. Finite element assessment of an affine self–consistent model for hexagonal polycrystals. European Journal of Mechanics - A/Solids. 2017;61:345--356.
Le Duigou A, Réquilé S, Beaugrand J, Scarpa F, Castro M. Natural fibres actuators for smart bio-inspired hygromorph biocomposites. Smart Materials and Structures. 2017;26(12):125009.
Munier R, Doudard C, Calloch S, Weber M. Identification of the micro-plasticity mechanisms at the origin of self-heating under cyclic loading with low stress amplitude. International Journal of Fatigue. 2017;103:122-135.
Levieil B, Bridier F, Doudard C, Klosek V, Thevenet D, Calloch S. Experimental Comparison of In-Depth Residual Stresses Measured with Neutron and X-Ray Diffraction with a Numerical Stress Relaxation Correction Method. Materials Science Forum. 2017;905:131-136.
Helbert G, Saint-Sulpice L, Chirani S, Dieng L, Lecompte T, Calloch S et al. A uniaxial constitutive model for superelastic NiTi SMA including R-phase and martensite transformations and thermal effects. Smart Materials and Structures. 2016;26(2):025007.
Toumi S, Amirat Y, Elbouchikhi E, Trabelsi M, Benbouzid M, Faouzi Mimouni M. A simplified mathematical approach for magnet defects modeling in a PMSG used for Marine Current Turbine. 2016;552-557.
Toumi S, Amirat Y, Elbouchikhi E, Trabelsi M, Mimouni M, Benbouzid M. Second-order sliding mode for marine current turbine fault-tolerant control. 2016;1-6.
Challamel N, Reddy J, Wang C. Eringen’s Stress Gradient Model for Bending of Nonlocal Beams. Journal of Engineering Mechanics - ASCE. 2016;142(12)
Zhang H, Wang C, Challamel N. Buckling and vibration of Hencky bar-chain with internal elastic springs. International Journal of Mechanical Sciences. 2016;119:383-395.
Pham C, Thuillier S, Manach P. Prediction of flow stress and surface roughness of stainless steel sheets considering an inhomogeneous microstructure. Materials Science and Engineering: A. 2016;678:377-388.
Jeanson A, Bay F, Jacques N, Avrillaud G, Arrigoni M, Mazars G. A coupled experimental/numerical approach for the characterization of material behavior at high strain-rate using electromagnetic tube expansion testing. International Journal of Impact Engineering. 2016;98:75-87.
Lemechko P, Le Fellic M, Elain A, Bruzaud S. 45ème Colloque National du Groupe Français des Polymères. 2016..
Trachi Y, El Bouchikhi E, Choqueuse V, Benbouzid M, Tianzhen W. A Novel Induction Machine Fault Detector Based on Hypothesis Testing. IEEE Transactions on Industry Applications. 2016;53(3):3039-3048.
http://ieeexplore.ieee.org/document/7736963/
Follain N, Alexandre B, Chappey C, Colasse L, Mederic P, Marais S. Barrier properties of polyamide 12/montmorillonite nanocomposites: Effect of clay structure and mixing conditions. Composites Science and Technology. 2016;136:18-28.
Zhang H, Wang C, Ruocco E, Challamel N. Hencky bar-chain model for buckling and vibration analyses of non-uniform beams on variable elastic foundation. Engineering Structures. 2016;126:252-263.
Beicha D, Kanit T, Brunet Y, Imad A, Moumen A, Khelfaoui Y. Effective transverse elastic properties of unidirectional fiber reinforced composites. Mechanics of Materials. 2016;102:47-53.
Levieil B, Bridier F, Doudard C, Thevenet D, Calloch S. User Influence on Two Complementary Residual Stress Determination Methods: Contour Method and Incremental X-Ray Diffraction. Experimental Mechanics. 2016;56(9):1641-1652.
Beicha D, Kanit T, Brunet Y, Imad A, El Moumen A, Khelfaoui Y. Effective transverse elastic properties of unidirectional fiber reinforced composites. Mechanics of Materials. 2016;102:47-53.
http://www.sciencedirect.com/science/article/pii/S0167663616302241
Le Corvec M, Allain C, Lardjane S, Cavey T, Turlin B, Fautrel A et al. Mid-infrared fibre evanescent wave spectroscopy of serum allows fingerprinting of the hepatic metabolic status in mice. Analyst. 2016;141(22):6259-6269.
http://pubs.rsc.org
Kaikaa M, Kecita Z, Elbouchikhi E, Benbouzid M. Effect of unbalanced voltages on static eccentricity fault diagnosis in induction motors. 2016;6335-6340.
Trachi Y, Elbouchikhi E, Choqueuse V, Wang T, Benbouzid M. Induction machine faults detection based on a constant false alarm rate detector. 2016;6359-6363.
Barthélémy R, Jacques N, Kerampran S, Vermeersch F. Modelling of micro-inertia effects in closed-cell foams with application to acoustic and shock wave propagation. International Journal of Solids and Structures. 2016;97-98:445-457.
Sartori C, Mercier S, Jacques N, Molinari A. On the dynamic behavior of porous ductile solids containing spheroidal voids. International Journal of Solids and Structures. 2016;97-98:150-167.
http://www.sciencedirect.com/science/article/pii/S0020768316301949
Tarfaoui M, Lafdi K, El Moumen A. Mechanical properties of carbon nanotubes based polymer composites. Composites Part B: Engineering. 2016;103:113-121.
Mandin P, Astier F, Boyer G, Merdrignac O, Noiret N. Experimental and Numerical Study of Small Lead Acid Batteries Regeneration. 2016..
Arbaoui J, Tarfaoui M, El Malki Alaoui A. Dynamical characterisation and damage mechanisms of E-glass/vinylester woven composites at high strain rates compression. Journal of Composite Materials. 2016;50(24):3313-3323.
Bouaoune L, Brunet Y, El Moumen A, Kanit T, Mazouzi H. Random versus periodic microstructures for elasticity of fibers reinforced composites. Composites Part B: Engineering. 2016;103:68-73.
http://www.sciencedirect.com/science/article/pii/S1359836816303122
Vales B, Marguet S, Créac'Hcadec R, Sohier L, Ferrero J, Navarro P. Numerical & Experimental Study of a Modified Arcan Device in Dynamic: Application to Bonded Joints. 2016..
Gibaud A, Bal J, Gullikson E, Wang C, Vignaud G. Resonant soft X-ray reflectivity of ultrathin polymer films at the C-edge: A direct approach. AIP Advances. 2016;6(9):095016.
Martins J, Cunha P, Neto D, Alves J, Oliveria M, Laurent H et al. A staggered coupling strategy for the finite element analysis of warm deep drawing process. 2016..
Manach P, Coer J, Jegat A, Laurent H, Yoon J. Benchmark 3-Springback of an Al-Mg alloy in warm forming conditions. 2016..
Morvan B, Priour D, Guédé Z, Bles G. Finite element model for the assessment of the mesh resistance to opening of fishing nets. Ocean Engineering. 2016;123:303-313.
Herisson B, Challamel N, Picandet V, Perrot A. Nonlocal continuum analysis of a nonlinear uniaxial elastic lattice system under non-uniform axial load. Physica E: Low-dimensional Systems and Nanostructures. 2016;83:378-388.
Chikhi A, Belhamri A, Glouannec P, Magueresse A. Experimental study and modeling of hygro-thermal behavior of polystyrene concrete and cement mortar. Application to a multilayered wall. Journal of Building Engineering. 2016;7:183-193.
Gallegos Mayorga L, Sire S, Correia J, de Jesus A, Valente I, Rebelo C et al. Design S-N Curves for old Portuguese and French riveted bridges connection based on statistical analyses. Procedia Engineering. 2016;160:77-84.
Luiza Pedrotti M, Petit S, Elineau A, Bruzaud S, Crebassa J, Dumontet B et al. Changes in the Floating Plastic Pollution of the Mediterranean Sea in Relation to the Distance to Land. PLoS ONE. 2016;11(8):e0161581.
Lerbet J, Nicot F, Challamel N, Darve F. Kinematic Structural Stability. 2016;(elec. proc.).
Breard J, Saouab A, Bouquet G. Dependence of the Reinforcement Anisotropy on a Three Dimensional Resin Flow Observed by X-Ray Radioscopy. Journal of Reinforced Plastics and Composites. 2016;18(9):814-826.
Khaldi M, Vivet A, Bourmaud A, Sereir Z, Kada B. Damage analysis of composites reinforced with Alfa fibers: Viscoelastic behavior and debonding at the fiber/matrix interface. Journal of Applied Polymer Science. 2016;133(31)
Rangeard D, Perrot A, Chen C. Extrusion flow modelling of concentrated mineral suspensions. 2016;307-311.
Tissier F, Mallem Y, Goanvec C, Didier R, Aubry T, Bourgeois N et al. A non-hypocholesterolemic atorvastatin treatment improves vessel elasticity by acting on elastin composition in WHHL rabbits. Atherosclerosis. 2016;251:70-77.
Arbaoui J, Tarfaoui M, Bouery C, El Malki Alaoui A. Comparative study of mechanical properties and damage kinetics of two- and three-dimensional woven composites under high-strain rate dynamic compressive loading. International Journal of Damage Mechanics. 2016;25(6):878-899.
Rezgani L, Madani K, Feaugas X, Touzain S, Cohendoz S, Valette J. Influence of water ingress onto the crack propagation rate in a AA2024-T3 plate repaired by a carbon/epoxy patch. Aerospace Science and Technology. 2016;55:359-365.
Kocsis A, Challamel N. On the post-buckling of distributed microstructured system The finite element elastica. International Journal of Mechanical Sciences. 2016;114:12-20.
Colinart T, Pierre T. Radiative and hygrothermal properties of flax/viscose spunlaced nonwovens. Journal of Industrial Textiles. 2016;46(4):1024-1038.
Zrida M, Laurent H, Rio G. Numerical study of mechanical behaviour of a polypropylene reinforced with Alfa fibres. Journal of Composite Materials. 2016;50(21):2883-2893.
Elhannani M, Madani K, Mokhtari M, Touzain S, Feaugas X, Cohendoz S. A new analytical approach for optimization design of adhesively bonded single-lap joint. Structural Engineering and Mechanics. 2016;59(2):313-326.
Gao Y, Asserin O, Ayrault D, Fandeur O, Ronfard-Haret M, Solas D et al. Comparison of two hot cracking tests JWRI and CRW. 2016..
Wang C, Zhang H, Challamel N, Xiang Y. Buckling of Nonlocal Columns with Allowance for Selfweight. Journal of Engineering Mechanics - ASCE. 2016;142(7)
Ponnamma D, Saiter A, Saiter J, Thomas S, Grohens Y, Almaadeed M et al. Influence of Temperature on the Confinement Effects of Micro and Nano Level Graphite Filled Poly(Isoprene-Co-Isobutylene) Composites. Journal of Polymer Research. 2016;23(7):125.
Maxime V, Ben Naceur C, d'Almeida M, Kedzierski M, Le Grand A, Mansour H et al. L’eau du Golfe du Morbihan sous haute surveillance : Mise au point de nouveaux biomarqueurs. 2016..
Desvaux M, Le Goff Latimier R, Ben Ahmed H, Multon B, Sire S. Modélisation des pertes dans les aimants des multiplicateurs magnétiques pour l'éolien. 2016..
Lerbet J, Challamel N, Nicot F, Darve F. Geometric degree of nonconservativity: Set of solutions for the linear case and extension to the differentiable non-linear case. Applied Mathematical Modelling. 2016;40(11-12):5930--5941.
Lerbet J, Hello G, Challamel N, Nicot F, Darve F. 3-dimensional flutter kinematic structural stability. Nonlinear Analysis: Real World Applications. 2016;29:19-37.
Landreau M, Duthoit F, Claeys-Bruno M, Vandenabeele-3 Trambouze O, Aubry T, Godfroy A et al. Entrapment of anaerobic thermophilic and hyperthermophilic marine micro-organisms in a gellan/xanthan matrix. Journal of Applied Microbiology. 2016;120(6):1531-1541.
Férec J, Bertevas E, Khoo B, Ausias G, Phan-Thien N. The effect of shear-thinning behaviour on rod orientation in filled fluids. Journal of Fluid Mechanics. 2016;798:350-370.
Kedzierski M, Le Tilly V, Bourseau P, César G, Sire O, Bruzaud S. New Approaches for the Extraction and Identification of Microplastics From Marine Sediment. 2016;88.
Duarte L, Nag S, Castro M, Zaborova E, Ménand M, Sollogoub M et al. Chemical Sensors Based on New Polyamides Biobased on (Z) Octadec-9-Enedioic Acid and β-Cyclodextrin. Macromolecular Chemistry and Physics. 2016;217(14):1620-1628.
Nouri K, Jemmali M, Benali A, Walha S, Zehani K, Ben Salah A et al. Investigation of the critical behavior of SmNi2.7Fe0.3 intermetallic compound. 2016..
Albert J, Monbet V, Jolivet-Gougeon A, Fatih N, Le Corvec M, Seck M et al. A novel method for a fast diagnosis of septic arthritis using mid infrared and deported spectroscopy. Joint Bone Spine. 2016;83(3):318-323.
Challamel N, Rajagopal K. On stress-based piecewise elasticity for limited strain extensibility materials. International Journal of Non-Linear Mechanics. 2016;81:303-309.
Laurent H, Carin M, Coer J, Le Masson P, Favero J, Canivenc R et al. Simulations of Joule Effect Heating in a Bulge Test. 2016..
Tissier F, Mallem Y, Goanvec C, Didier R, Aubry T, Bourgois N et al. 0300 : Mechanical and functional vascular impact of a low dose atorvastatin treatment in WHHL rabbits. 2016;8(3):214.
Chikhi A, Belhamri A, Glouannec P, Magueresse A. Hygro-thermal behaviour of porous building material subjected to different external temperature and humidity conditions. Journal of Engineering Science and Technology (JESTEC). 2016;11:458-475.
Kana Kana J, Vignaud G, Gibaud A, Maaza M. Thermally driven sign switch of static dielectric constant of VO 2 thin film. Optical Materials. 2016;54:165-169.
Bidaud P, Créac'Hcadec R, Jousset P, Thevenet D. A fatigue life prediction method of adhesively bonded joints based on visco-elastic and visco-plastic behavior: application under cyclic shear loading. Journal of Adhesion Science and Technology. 2016;30(15):1641-1661.
Challamel N, Grazide C, Picandet V, Perrot A, Zhang Y. A nonlocal Fourier's law and its application to the heat conduction of one-dimensional and two-dimensional thermal lattices. Comptes Rendus. Mécanique. 2016;344(6):388-401.
Beena Unni A, Vignaud G, Bal J, Delorme N, Beuvier T, Thomas S et al. Solvent Assisted Rinsing : Stability/Instability of Ultrathin Polymer Residual Layer. Macromolecules. 2016;49(5):1807-1815.
Lerbet J, Challamel N, Nicot F, Darve F. Kinematical structural stability. Discrete and Continuous Dynamical Systems - Series S. 2016;9(2):529-536.
Guzman Maldonado E, Hamila N, Naouar N, Moulin G, Boissé P. Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization. Materials & Design. 2016;93:431-442.
Sicardy B, Talbot J, Meza E, Camargo J, Desmars J, Gault D et al. Pluto's Atmosphere from the 2015 June 29 Ground-Based Stellar Occultation at the Time of the New Horizons Flyby. The Astrophysical Journal Letters. 2016;819(2):L38.
Huneau B, Masquelier I, Marco Y, Le Saux V, Noizet S, Schiel C et al. Fatigue crack initiation in a carbon black-filled natural rubber. Rubber Chemistry and Technology. 2016;89(1):126-141.
Vales B, Marguet S, Créac'Hcadec R, Sohier L, Ferrero J, Navarro P. Numerical study of the local behaviour of adhesive bonds under dynamic loading. Journal of Adhesion Science and Technology. 2016;30(12):1319-1339.
Herisson B, Picandet V, Challamel N, Perrot A. Scale effects in the static response of a one-dimensional quasi-brittle damage lattice. European Journal of Environmental and Civil Engineering. 2016;20(10):1233-1248.
Bal J, Beuvier T, Vignaud G, Chebil M, Ben-Jabrallah S, Ahmed I et al. Swelling of Poly( n -butyl methacrylate) Films Exposed to Supercritical Carbon Dioxide: A Comparative Study with Polystyrene. Langmuir. 2016;32(7):1716-1722.
Cadou J, Boumediene F, Guevel Y, Girault G, Duigou L, Daya E et al. A high order reduction-correction method for Hopf bifurcation in fluids and for viscoelastic vibration. Computational Mechanics. 2016;57(2):305-324.
Leloup R, Roncin K, Berhel M, Bles G, Leroux J, Jochum C et al. A continuous and analytical modeling for kites as auxiliary propulsion devoted to merchant ships, including fuel saving estimation. Renewable Energy. 2016;86:483-496.
Nag-Chowdhury S, Bellegou H, Pillin I, Castro M, Longrais P, Feller J. Non-intrusive health monitoring of infused composites with embedded carbon quantum piezo-resistive sensors. Composites Science and Technology. 2016;123:286-294.
Le Duigou A, Castro M. Evaluation of force generation mechanisms in natural, passive hydraulic actuators. Scientific Reports. 2016;6(1):18105.
Seantier B, Bendahou D, Bendahou A, Grohens Y, Kaddami H. Multi-scale cellulose based new bio-aerogel composites with thermal super-insulating and tunable mechanical properties. Carbohydrate Polymers. 2016;138:335-348.
Hammiche D, Bourmaud A, Boukerrou A, Djidjelli H, Grohens Y. Number of processing cycle effect on the properties of the composites based on alfa fiber. Journal of Thermoplastic Composite Materials. 2016;29(9):1176-1193.
Beeran Y, Bobnar V, Gorgieva S, Grohens Y, Finsgar M, Thomas S et al. Mechanically strong, flexible and thermally stable graphene oxide/nanocellulosic films with enhanced dielectric properties. RSC Advances. 2016;6(54):49138-49149.
Le Corvec M, Boussard-Plédel C, Charpentier F, Fatih N, Le Dare B, Massart F et al. Chemotaxonomic discrimination of lichen species using an infrared chalcogenide fibre optic sensor: A useful tool for on-field biosourcing. RSC Advances. 2016;6(110):108187--108195.
Fourest T, Arrigoni M, Deletombe E, Dupas J, Laurens J. Prediction of thermal effects magnitude for HRAM event in fuel-filled tank using the Rayleigh-Plesset Equation. International Journal of Computational Methods and Experimental Measurements. 2016;4(3):pages 301-310.
Nag S, Sachan A, Castro M, Choudhary V, Feller J. Spray layer-by-layer assembly of POSS functionalized CNT quantum chemo-resistive sensors with tuneable selectivity and ppm resolution to VOC biomarkers. Sensors and Actuators B: Chemical. 2016;222:362-373.
Tabbache B, Douida S, Benbouzid M, Diallo D, Kheloui A. Direct torque control of five-leg inverter-dual induction motor powertrain for electric vehicles. Electrical Engineering. 2016;98(1):1–13.
Chahmi A, Bendjebbar M, Raison B, Benbouzid M. An Extender Kalman Filter-based Induction Machines Faults Detection. International Journal of Electrical and Computer Engineering. 2016;6:535-535.
Challamel N, Wang C, Elishakoff I. Nonlocal or gradient elasticity macroscopic models: A question of concentrated or distributed microstructure. Mechanics Research Communications. 2016;71:25-31.
Mansouri L, Thuillier S, Manach P. Thermo-mechanical modeling of Portevin-Le Chatelier instabilities under various loading paths. International Journal of Mechanical Sciences. 2016;115:676-688.
Le Corvec M, Allain C, Lardjane S, Cavey T, Turlin B, Fautrel A et al. L’analyse du sérum par spectroscopie moyen infrarouge permet d’obtenir une signature du statut métabolique du foie chez la souris. Nutrition Clinique et Métabolisme. 2016;30(3):277.
Souto N, Andrade-Campos A, Thuillier S. A numerical methodology to design heterogeneous mechanical tests. International Journal of Mechanical Sciences. 2016;107:264-276.
Hammiche D, Boukerrou A, Djidjelli H, Grohens Y, Bendahou A, Seantier B. Characterization of cellulose nanowhiskers extracted from alfa fiber and the effect of their dispersion methods on nanocomposite properties. Journal of Adhesion Science and Technology. 2016;30(17):1899-1912.
Benaddi H, Benachour D, Grohens Y. = Preparation and characterization of polystyrene-MgAl layered double hydroxide nanocomposites using bulk polymerization. Journal of Polymer Engineering. 2016;36(7):681-693.
Boumediene F, Daya E, Cadou J, Duigou L. Forced harmonic response of viscoelastic sandwich beams by a reduction method. Mechanics of Advanced Materials and Structures. 2016;23(11):1290-1299.
Beloufa H, Ouinas D, Tarfaoui M, Benderdouche N. Effect of stacking sequence of the bonded composite patch on repair performance. Structural Engineering and Mechanics. 2016;57(2):295-313.
Praveen K, Thomas S, Grohens Y, Mozetic M, Junkar I, Primc G et al. Investigations of plasma induced effects on the surface properties of lignocellulosic natural coir fibres. Applied Surface Science. 2016;368:146-156.
Hamour N, Boukerrou A, Bourmaud A, Djidjelli H, Grohens Y. EFFECT OF ALFA FIBER TREATMENT AND MAPP COMPATIBILIZATION ON THERMAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE/ALFA FIBER COMPOSITES. Cellulose Chemistry and Technology. 2016;50(9-10):1069-1076.
Arnauld de Sartre X, Oszwald J, Veiga I, Castro M, Assis W, Michelloti F et al. Sustainable development policies and the spread of land-sharing practices. A statistical assessment in a frontier region of the Brazilian Amazon. Journal of Rural Studies. 2016;48:65-76.
Zembouai I, Kaci M, Bruzaud S, Pillin I, Audic J, Shayanfar S et al. Electron beam radiation effects on properties and ecotoxicity of PHBV/PLA blends in presence of organo-modified montmorillonite. Polymer Degradation and Stability. 2016;132:117-126.
Pierre A, Perrot A, Histace A, Gharsalli S, Kadri E. Mesure de viscosité : les limites d'un rhéomètre à géométrie vane. Academic Journal of Civil Engineering. 2016;34(1):975-982.
Grinnaert F, Billard J, Laurens J. KGmax curves associated with second generation intact stability criteria for different types of ships. Journal of Marine Science and Application. 2016;15(3):223-235.
Tripathi K, Vincent F, Castro M, Feller J. Flax fibers - epoxy with embedded nanocomposite sensors to design lightweight smart bio-composites. Nanocomposites. 2016;2(3):125-134.
Pradeau A, Thuillier S, Yoon J. Prediction of failure in bending of an aluminium sheet alloy. International Journal of Mechanical Sciences. 2016;119:23-35.
Chobaut N, Carron D, Saelzle P, Drezet J. Measurements and Modeling of Stress in Precipitation-Hardened Aluminum Alloy AA2618 during Gleeble Interrupted Quenching and Constrained Cooling. Metallurgical and Materials Transactions A. 2016;47A(11):5641-5649.
Nguyen T, Lanoiselle J, Allaf T, Allaf K. Experimental and fundamental critical analysis of diffusion model of airflow drying. Drying Technology. 2016;34(15):1884-1899.
El Achkar J, Lendormi T, Hobaika Z, Salameh D, Louka N, Maroun R et al. Anaerobic digestion of grape pomace Biochemical characterization of the fractions and methane production in batch and continuous digesters. Waste Management. 2016;50:275-282.
Neto D, Coer J, Oliveira M, Alves J, Manach P, Menezes L. Numerical analysis on the elastic deformation of the tools in sheet metal forming processes. International Journal of Solids and Structures. 2016;100:270-285.
Le Duigou A, Castro M, Bevan R, Martin N. 3D printing of wood fibre biocomposites From mechanical to actuation functionality. Materials & Design. 2016;96:106-114.
Brisson E, Desplats H, Carre P, Keryvin V, Rogeon P, Feulvarch E et al. Effective Thermal and Electrical Conductivities of AgSnO2 During Sintering. Part II Constitutive Modeling and Numerical Simulation. Metallurgical and Materials Transactions A. 2016;47A(12):6319-6329.
Parameswaranpillai J, Sidhardhan S, Jose S, Hameed N, Salim N, Siengchin S et al. Miscibility, Phase Morphology, Thermomechanical, Viscoelastic and Surface Properties of Poly(epsilon-caprolactone) Modified Epoxy Systems Effect of Curing Agents. Industrial and engineering chemistry research. 2016;55(38):10055-10064.
Kedzierski M, Le Tilly V, Bourseau P, Bellegou H, César G, Sire O et al. Microplastics elutriation from sandy sediments: A granulometric approach. Marine Pollution Bulletin. 2016;107(1):315-323.
Bounoua S, Lemaire E, Férec J, Ausias G, Kuzhir P. Shear-thinning in concentrated rigid fiber suspensions: Aggregation induced by adhesive interactions. Journal of Rheology. 2016;60(6):1279-1300.
Hassaini L, Kaci M, Benhamida A, Bruzaud S, Pillin I, Grohens Y. The effects of PHBV-g-MA compatibilizer on morphology and properties of poly(3-hydroxybutyrate-Co-3-hydroxyvalerate)/olive husk flour composites. Journal of Adhesion Science and Technology. 2016;30(19):2061-2080.
Gopakumar D, Thomas S, Grohens Y. Nanocelluloses as Innovative Polymers for Membrane Applications. 2016;253-275.
Courtois M, Carin M, Le Masson P, Gaied S, Balabane M. Guidelines in the experimental validation of a 3D heat and fluid flow model of keyhole laser welding. Journal of Physics D: Applied Physics. 2016;49(15)
Pierre A, Perrot A, Histace A, Gharsalli S, Kadri E. A study on the limitations of a vane rheometer for mineral suspensions using image processing. Rheologica Acta. 2016..
Wardhono E, Zafimahova-Ratisbonne A, Saleh K, Clausse D, Lanoiselle J. W/O Emulsion Destabilization and Release of a Polysaccharide Entrapped in the Droplets. Journal of Dispersion Science and Technology. 2016;37(11):1581-1589.
Durrieu G, Pham Q, Foltete A, Maxime V, Grama I, Le Tilly V et al. Dynamic extreme values modeling and monitoring by means of for sea shores water quality biomarkers and valvometry. Environmental Monitoring and Assessment. 2016;188:401-409.
Ghez D, Fortpied C, Mounier N, Carde P, Perrot A, Khaled H et al. STEM CELL COLLECTION AFTER FAILURE OF UPFRONT ABVD OR BEACOPP IN PATIENTS WITH HIGH RISK ADVANCED STAGE III-IV HODGKIN'S LYMPHOMA. Haematologica. 2016;101(5):50.
Bekhoucha F, Rechak S, Cadou J. Eigensensitivity analysis of rotating clamped uniform beams with the asymptotic numerical method. Journal of Sound and Vibration. 2016;385:310-329.
Bekhoucha F, Rechak S, Duigou L, Cadou J. Nonlinear free vibrations of centrifugally stiffened uniform beams at high angular velocity. Journal of Sound and Vibration. 2016;379:177-190.
Perrot A, Rangeard D, Levigneur A. Linking rheological and geotechnical properties of kaolinite materials for earthen construction. Materials and structures. 2016;49(11):4647--4655.
Issaadi K, Habi A, Grohens Y, Pillin I. Maleic anhydride-grafted poly(lactic acid) as a compatibilizer in poly(lactic acid)/graphene oxide nanocomposites. Polymer Bulletin. 2016;73(7):2057-2071.
Hassaini L, Kaci M, Benhamida A, Bruzaud S, Pillin I, Grohens Y. The effects of PHBV-g-MA compatibilizer on morphology and properties of poly(3-hydroxybutyrate-Co-3-hydroxyvalerate)/olive husk flour composites (vol 30, pg 2061, 2016). Journal of Adhesion Science and Technology. 2016;30(19)
Beeran Y, Bobnar V, Gorgieva S, Grohens Y, Finsgar M, Thomas S et al. Mechanically strong, flexible and thermally stable graphene oxide/nanocellulosic films with enhanced dielectric properties (vol 6, pg 49138, 2016). RSC Advances. 2016;6(62):S7473-S7474.
Allary C, Bourmaud A, Tinquaut F, Lechopier N, Buthion V, Chauvin F. “COLONAV – Navigateur de patients pour le dépistage du cancer colorectal dans les zones défavorisées”, volume 64, supplément 4. Epidemiology and Public Health = Revue d'Epidémiologie et de Santé Publique. 2016..
Ayad R, Baley C, Benzeggagh M. INTRODUCTION. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials. 2016;26(3-4):273-276.
Brisson E, Carre P, Desplats H, Rogeon P, Keryvin V, Bonhomme A. Effective Thermal and Electrical Conductivities of AgSnO2 During Sintering. Part I Experimental Characterization and Mechanisms. Metallurgical and Materials Transactions A. 2016;47A(12):6304-6318.
Merotte J, Le Duigou A, Bourmaud A, Behlouli K, Baley C. Mechanical and acoustic behaviour of porosity controlled randomly dispersed flax/PP biocomposite. Polymer Testing. 2016;51:174-180.
Ben Naceur C, Maxime V, Ben Mansour H, Le Tilly V, Sire O. Oyster's cells regulatory volume decrease A new tool for evaluating the toxicity of low concentration hydrocarbons in marine waters. Ecotoxicology and Environmental Safety. 2016;133:327-333.
El Kaddouri A, Perrin J, Colinart T, Moyne C, Leclerc S, Guendouz L et al. Impact of a Compressive Stress on Water Sorption and Diffusion in Ionomer Membranes for Fuel Cells. A 1 H NMR Study in Vapor-Equilibrated Nafion. Macromolecules. 2016;49(19):7296-7307.
Manach P, Decultot N, Thuillier S, Cochet J. Thermo-mechanical forming of a large sling shackle. International Journal of Advanced Manufacturing Technology. 2016;86(5-8):1573-1591.
Yu K, Étienne S, Scolan Y, Hay A, Fontaine E, Pelletier D. Flow-induced vibrations of in-line cylinder arrangements at low Reynolds numbers. Journal of Fluids and Structures. 2016;60:37-61.
http://www.sciencedirect.com/science/article/pii/S0889974615002406
Bourmaud A, Akesson D, Beaugrand J, Le Duigou A, Skrifvars M, Baley C. Recycling of L-Poly-(lactide)-Poly-(butylene-succinate)-flax biocomposite. Polymer Degradation and Stability. 2016;128:77-88.
Nedjma S, Djidjelli H, Boukerrou A, Grohens Y, Chibani N, Benachour D et al. Effect of chemical treatment on newspaper fibers reinforced polymer poly(vinyl chloride) composites. Journal of Vinyl and Additive Technology. 2016;22(3):173-181.
Pillin I, Castro M, Nag-Chowdhury S, Feller J. Robustness of carbon nanotube sensing interphase to probe composites’ interfacial damage in-situ. Journal of Composite Materials. 2016;50(1):109-113.
Perrot A, Rangeard D, Pierre A. Structural built-up of cement-based materials used for 3D-printing extrusion techniques. Materials and structures. 2016;49(4):1213–1220.
Niyigena C, Amziane S, Chateauneuf A, Arnaud L, Bessette L, Collet F et al. Variability of the mechanical properties of hemp concrete. Materials Today Communications. 2016;7:122–133.
Anty R, Le Corvec M, Iannelli A, Patouraux S, Saint-Paul M, Schneck A et al. MID-INFRARED SPECTROSCOPY HAS A HIGH SENSITIVITY AND SPECIFICITY FOR POINT-OF-CARE DIAGNOSIS OF NON-ALCOHOLIC STEATO-HEPATITIS. Journal of Hepatology. 2016;64(2):S177--S177.
Kherrouba N, Bouabdallah M, Badji R, Carron D, Amir M. Beta to alpha transformation kinetics and microstructure of Ti-6Al-4V alloy during continuous cooling. Materials Chemistry and Physics. 2016;181:462-469.
Baley C, Kervoelen A, Le Duigou A, Goudenhooft C, Bourmaud A. Is the low shear modulus of flax fibres an advantage for polymer reinforcement? Materials Letters. 2016;185:534-536.
Nader C, Pellen F, Roquefort P, Aubry T, Le Jeune B, Le Brun G et al. Evaluation of low viscosity variations in fluids using temporal and spatial analysis of the speckle pattern. Optics Letters. 2016;41(11):2521.
Anty R, Le Corvec M, Renou C, Raoult A, Nousbaum J, Tanne F et al. MID-INFRARED SPECTROSCOPY HAS A HIGH SENSITIVITY AND SPECIFICITY FOR POINT-OF-CARE DIAGNOSIS OF SPONTANEOUS BACTERIAL PERITONITIS. Journal of Hepatology. 2016;64(2):S666--S667.
Tung T, Karunagaran R, Tran D, Gao B, Nag-Chowdhury S, Pillin I et al. Engineering of graphene/epoxy nanocomposites with improved distribution of graphene nanosheets for advanced piezo-resistive mechanical sensing. Journal of Materials Chemistry C. 2016;4(16):3422-3430.
Le Corvec M, Charpentier F, Kachenoura A, Bensaid S, Henno S, Bardou-Jacquet E et al. Fast and Non-Invasive Medical Diagnostic Using Mid Infrared Sensor: The AMNIFIR Project. Innovation and Research in BioMedical engineering. 2016;37(2):116-123.
Le Duigou A, Bourmaud A, Gourier C, Baley C. Multi-scale shear properties of flax fibre reinforced polyamide 11 biocomposites. Composites Part A: Applied Science and Manufacturing. 2016;85:123-129.
Natale G, Ausias G, Ferec J, Heuzey M, Carreau P. Modeling interactions in carbon nanotube suspensions Transient shear flow. Journal of Rheology. 2016;60(6):1069-1083.
Zembouai I, Kaci M, Bruzaud S, Dumazert L, Bourmaud A, Mahlous M et al. Gamma irradiation effects on morphology and properties of PHBV/PLA blends in presence of compatibilizer and Cloisite 30B. Polymer Testing. 2016;49:29-37.
Latrache N, Abcha N, Crumeyrolle O, Mutabazi I. Defect-mediated turbulence in ribbons of viscoelastic Taylor-Couette flow. Physical Review E. 2016;93(4):043126.
Elain A, Le Grand A, Corre Y, Le Fellic M, Hachet N, Le Tilly V et al. Valorisation of local agro-industrial processing waters as growth media for polyhydroxyalkanoates (PHA) production. Industrial Crops and Products. 2016;80:1--5.
Trachi Y, El Bouchikhi E, Choqueuse V, Benbouzid M. Induction Machines Fault Detection Based on Subspace Spectral Estimation. IEEE Transactions on Industrial Electronics. 2016;63(9)
http://ieeexplore.ieee.org/document/7473929/
Bounoua S, Lemaire E, Férec J, Ausias G, Zubarev A, Kuzhir P. Apparent yield stress in rigid fibre suspensions: the role of attractive colloidal interactions. Journal of Fluid Mechanics. 2016;802:611-633.
Picandet V, Ferraris C, de Kee D. Novel rheometer to measure yield stress of suspensions. 2007;pp 335-340.
Jacques N, Elias A, Potier-Ferry M, Zahrouni H. Buckling and wrinkling during strip conveying in processing lines. Journal of Materials Processing Technology. 2007;190(1-3):33-40.
Saint-Sulpice L, Chirani S, Calloch S. A cyclic model for superelastic shape memory alloys. 2007;65262F.
Cadou J, Potier-Ferry M, Cochelin B. A numerical method for the computation of bifurcation points in fluids mechanics. European Journal of Mechanics - B/Fluids. 2006;25:234-254.
Gourier C, Pincet F, Le Bouar T, Zhang Y, Esnault J, Mallet J et al. Can Small Complex Chains Be Treated as Polymers? Macromolecules. 2004;37(23):8778-8784.
Gourier C, Knobler C, Daillant J, Chatenay D. Collapse of Monolayers of 10,12-Pentacosadiyonic Acid: Kinetics and Structure. Langmuir. 2002;18(24):9434-9440.
Éliat P, Lechaux D, Gervais A, Rioux-Leclercq N, Franconi F, Lemaire L et al. Is magnetic resonance imaging texture analysis a useful tool for cell therapy in vivo monitoring? Anticancer Research. 2002;21(6A):3857-3860.
Neme A, Dahan N. Comportement élastique des matériaux métalliques sous hautes pressions. Comptes Rendus de l'Académie des Sciences. Série 2. 1994..